Free H12-322 Exam braindumps download (H12-322 exam dumps Free)

The following is true about the WLAN actual site survey in the trace (network cable or fiber), power supply is correct?

Confirm the overall rules of the route, you need to confirm with the owner whether you can punch through the wall, whether you can take the open line, whether there is conditional hidden line, the network cable is Do you want to use a wire slot or add a conduit?
In the survey process, the length of the trace should be calculated according to the actual environment, and the length of the trace is not required.
If the AP needs AC power supply, it needs to confirm the location of the power supply. If there are special requirements for the route in some locations, additional marking is required.
In the outdoor scene survey, each outdoor AP installation location needs to consider the routing problem.

Answer(s): A,C

The following is about using the AP6310SN to create a new WLAN room subsystem. What is wrong with this?

The number of antennas in a single AP band is 4~8, and it is recommended that no more than 10 antennas under normal circumstances.
Under normal circumstances, the distance between the AP and the far-end room sub-antenna is controlled within 50 meters, and it is recommended not to exceed 60 meters.
In a typical room sub-scenario, it is recommended that the output power of each antenna be basically the same, and the output power is controlled at 12~18dBm. The specific power selection and field
Strong demand is related to the wall structure
There is interference between the room division antennas of the same AP, so it cannot be placed intensively according to requirements.

Answer(s): D