Huawei H19-371_V1.0 Exam Prep
HCSA-Presales-Digital Power (Page 21 )

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• What information each stakeholder needs
• When and how often it should be communicated
• Which format or channel should be used
• Who is responsible for communicating it

• A: The team should not decide stakeholder communications without first checking the established plan and CEO’s needs.
• B: An executive summary may be appropriate, but choosing a solution before reviewing the plan is premature.
• D: The stakeholder engagement plan addresses how to engage stakeholders, but this is primarily a communication planning issue.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• File1.png — Yes: User1 can apply Label1 with the Microsoft Purview Information Protection client. The client supports labeling image files such as .png in this scenario.

• Folder2 — No: Folder2 is the root folder. The client does not allow labeling the root folder itself. Although the client can label ordinary folders, selecting one applies the label to existing files and subfolders—not automatically to future files.

• File1.docx — Yes: .docx is a supported Microsoft Word file type, so User1 can apply Label1 to it.

• Generates a syslog message
• Shuts down the PoE port
• Places the port into error-disabled (err-disabled) state
• Frees the power allocation

• A device starting to draw power does not necessarily generate a syslog message.
• Monitoring does not pause data traffic while checking power.
• Drawing less than the configured minimum does not automatically mean the device has failed and should be disconnected.

• The requirement is an assessment of the Azure environment’s design, which requires a support plan offering proactive architectural guidance.
• Premier support would provide this capability, but it is a high-cost option.
• Since the requirement says to minimize expenses, Premier is not the best recommendation.
• A lower-cost plan with the required advisory/design-review capability—historically Professional Direct in Azure’s support-plan model—would be more appropriate.

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

Correct choices

• DB1: Azure Data Box Heavy
• Virtual machines: Azure Migrate

Why

• Replication with minimal downtime
• A test migration
• Final cutover after validation

• You can configure different pre-shared keys for different device groups.
• All cameras could use one key.
• All scanners could use another key.
• Each key can be associated with an appropriate role or access policy.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

1. Ensure BOMs can include subcomponents ? Configure an entity relationship

1. Report changes made by engineers ? Enable auditing

• Configure entity relationship
• Configure auditing

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• Cloud architecture
• Data architecture
• Platform engineering
• Data engineering
• Provisioning and modernization

• Data protection is associated mainly with security and risk management.
• Data governance belongs to the governance perspective.
• Data science is not an AWS CAF capability.

• Financial performance
• Customer perspective
• Internal business processes
• Learning and growth

• Increasing the number of indicators can make the scorecard cluttered and less useful. Measures should be limited to those that are strategically important.
• The scorecard is mainly a tool for implementing and monitoring strategy, not for formulating strategy.
• It should contain both leading indicators and lagging indicators. Leading indicators predict future performance, while lagging indicators measure results already achieved.

• A: Person Accounts cannot be merged directly with standard Contact records.
• C: There is no Account Setup option that automatically merges Person Account duplicates.
• D: Matching rules and duplicate rules can help identify or prevent duplicates, but they do not automatically merge Person Accounts. Also, relationship considerations do not change the basic merge capability.

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A sophisticated attack sponsored by a government.
• Shadow IT: Unapproved technology or access methods used by employees.

• C — Custom buttons display at the top and bottom of a page: Correct. In Salesforce Classic, buttons can appear in the page’s button areas, including the top and bottom of record pages.
• D — Custom buttons are available for Person Accounts: Correct. Person Accounts use the Account object, so Account custom buttons can be available on Person Account layouts.
• E — Custom buttons can reference an external app: Correct. A URL custom button can launch or navigate to an external application or website.

• A: JavaScript custom buttons are a Salesforce Classic feature and are not supported in Lightning Experience. They do not enhance Lightning Experience.
• B: The User object does not generally support custom buttons in the same way standard business objects do.

• BCP (Business Continuity Plan): Ensures the organization can continue its broader business operations during and after a disruption. It is broader than the IT-focused recovery required here.
• Communication plan: Defines how information is shared with employees, the public, and other stakeholders; it does not restore systems.
• IRP (Incident Response Plan): Handles and contains security incidents, such as malware or unauthorized access. A tornado is a disaster, not primarily a cybersecurity incident.

• The Subscribe to Reports user permission.
• At least Viewer access to the report’s folder.
• Access to the report itself.

• Subscribe to Reports: Run Reports is not the relevant Salesforce permission.
• Chatter Subscribe to Reports is not a Salesforce permission.
• Set Running User relates to configuring the user whose permissions determine report results—not subscribing to a report.

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• ADF: Automatic Document Feeder; a printer/scanner hardware component.
• USB: A short-range wired connection, not a protocol for accessing a remote shared folder.
• PCL: Printer Control Language; it describes how print jobs are formatted, not how files or printers are shared over a network.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

text 
interface GigabitEthernet0/0.10 
 encapsulation dot1Q 3

• .10 is the router’s local subinterface number.
• dot1Q 3 identifies the 802.1Q VLAN tag carried on the trunk.

text 
interface GigabitEthernet0/0.3 
 encapsulation dot1Q 3

text 
interface GigabitEthernet0/0.2 
 encapsulation dot1Q 2

• Continuous deployment: Automates software releases; it does not specifically test input handling.
• Static code analysis: Examines source or compiled code without executing it. It can find coding flaws but does not directly stress the application with malformed inputs.
• Manual peer review: Developers inspect code or design manually. Useful, but not the best practice specifically for testing how a live product handles invalid input.

• Each Case must follow defined support steps.
• Each step must be completed within a specified time limit.

• Case Escalation Rules: Escalate Cases based mainly on age or criteria; they do not model a complete sequence of service steps.
• Process Builder with Scheduled Actions: Can automate time-based actions but is not the standard framework for Case service-level commitments.
• Omni-Channel Routing: Routes work to agents based on capacity and priority; it does not track Case lifecycle deadlines.

• AWS Budgets lets you create a cost or usage budget and configure alerts when actual or forecasted spending reaches a threshold. Notifications can be sent through email or Amazon SNS.
• Amazon CloudWatch can monitor AWS billing metrics and trigger an alarm when estimated charges exceed a specified amount.

• Amazon SQS is a message queue, not a cost-monitoring service.
• Cost Explorer analyzes spending but does not directly provide threshold notifications.
• AWS Cost and Usage Report delivers detailed billing data for analysis; it does not itself send threshold alerts.

• Azure creates a corresponding service principal in Microsoft Entra ID.
• The identity’s lifecycle is tied to the Azure resource.
• If the resource is deleted, Azure automatically deletes the identity.
• Only the associated resource can use that identity to request tokens.
• You can grant the identity permissions to access services such as Key Vault or Storage without storing credentials in code.

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• Microsoft Teams: Connects to Teams-related data, but it isn’t the primary connector for the Power Apps data tables.
• Personal Analytics: Provides personal productivity insights, not application data.
• SQL Server database: Only applies if the app explicitly uses SQL Server as its data source.
• Dataflows: Used for preparing and centralizing data, not as the normal direct connection to a Power Apps app.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

• The requirement explicitly says the organization wants to use SAML to secure Salesforce API access.
• The SAML Bearer Assertion Flow exchanges a SAML assertion for a Salesforce OAuth access token.
• It is intended for server-to-server or other noninteractive integrations where the application has already been authenticated by an identity provider.
• The connected app can be configured so administrators authorize or preauthorize applications that consume the APIs.

• B — JWT Bearer Flow: Uses a signed JWT, not a SAML assertion. It would be appropriate if the requirement specified JWT-based authentication.
• C — SAML Assertion Flow: This is not the standard Salesforce OAuth flow name; the relevant name is OAuth 2.0 SAML Bearer Assertion Flow.
• D — User-Agent Flow: Designed for interactive browser-based authorization, not a SAML-based server-to-server integration.

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• A — Increasing the minimum password length to 14 characters: Longer passwords have more possible combinations, making them harder to guess or crack through brute force.
• F — Requiring at least one special character: This increases password complexity and expands the possible character combinations.

• MD5 to SHA-512: Improves password-hash resistance, but does not stop users from choosing easy-to-guess passwords. Also, modern systems should use a password-specific hashing algorithm such as bcrypt, scrypt, or Argon2.
• Increasing maximum age to 120 days: Leaves weak passwords in use longer.
• Reducing minimum length to 10: Makes guessing easier.
• Reducing minimum age to zero: Allows immediate password changes but does not make the password itself harder to guess.

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• DB1 (500 TB): Azure Data Box Heavy

• Virtual machines: Azure Migrate

1. Select Exchange email as a location.
2. Use the built-in Azure Storage Account key sensitive information type as the condition.
3. Configure the DLP action to encrypt the email—for example, using Microsoft Purview Message Encryption.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• Third-party enterprise application with embedded AI: The provider manages most security controls. The customer mainly manages users, data, and configuration.
• Application using an existing third-party FM: The customer controls the application and its inputs/outputs, but the provider controls the underlying model and infrastructure.
• Fine-tuning a third-party FM: The customer has additional responsibility for training data, data protection, and model behavior, but still depends on the provider’s base model and platform.
• Building and training a model from scratch: The customer controls the model, training data, application, deployment, and many security safeguards. This creates the greatest security ownership.

1. Start with the 48-bit MAC address.
2. Split it into two 24-bit halves.
3. Insert FF:FE between the halves, creating a 64-bit value.
4. Invert the U/L bit—the seventh bit from the left in the first MAC byte.

text 
MAC:       00:1A:2B:3C:4D:5E 
EUI-64:    02:1A:2B:FF:FE:3C:4D:5E

• FE80 is the prefix commonly used for an IPv6 link-local address, not part of the EUI-64 interface ID.
• The interface ID is not random.
• The MAC address is modified by inserting FF:FE and changing the U/L bit.

• principal represents the source or initiating system.
• principal.port is the source port.
• target represents the destination system.
• target.port is the destination port.

text 
principal.port = 5555

• network.ApplicationProtocol = HTTP identifies HTTP traffic but not the backdoor specifically.
• target.port = 5555 finds traffic going to port 5555, rather than originating from it.
• network.ip_protocol = TCP is too broad because many services use TCP.

• Code suggestions: Inline completions as you write code, such as lines, functions, or blocks.
• Chat: An interactive interface for asking questions, explaining code, generating code, and helping with debugging.

• Knowledge Base: Not listed as a standard Copilot Individual IDE feature in this context.
• Pull Request Diff Analysis: More closely associated with GitHub-based code review or pull-request features, not the core Individual IDE extension capabilities.

• Advanced Persistent Threat (APT): A sustained, targeted attack campaign or attacker group—not a vulnerability.
• Trojan: Malware disguised as legitimate software.
• Stealthware: A general term for malware designed to avoid detection; it does not specifically mean an unknown vulnerability.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• Un AG puede tener réplicas en Windows y Linux desde SQL Server 2017; por tanto, una réplica Windows y otra Linux es posible.
• Sin embargo, las réplicas de un AG deben utilizar normalmente la misma versión principal de SQL Server. Una instancia SQL Server 2017 no puede tener directamente una réplica secundaria SQL Server 2019 como configuración normal y permanente.
• En tu escenario, SQL Server 2017 en Windows y SQL Server 2019 en Linux no se pueden añadir directamente como réplicas equivalentes de AG1. Primero habría que realizar un proceso de actualización/migración compatible, por ejemplo mediante una actualización gradual o una tecnología de migración como log shipping o distributed availability groups, según el diseño.

• Tipo de clúster y mecanismo de quorum.
• Failover normalmente manual en configuraciones multiplataforma.
• Edición y características compatibles.
• Configuración de endpoints y permisos.
• Limitaciones específicas de SQL Server en Linux.