IBM C1000-142 Exam Prep
IBM Cloud Advocate v2 (Page 10 )

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• Disable default accounts: Default or unused accounts may have known usernames or predictable settings, making them targets. They should be disabled, removed, or securely configured.
• Remove unnecessary services: Every running service creates potential vulnerabilities. Removing services the server does not need reduces exploitable entry points.

• Add the server to the asset inventory: Important for asset management, but not a hardening step.
• Document default passwords: Default passwords should be changed or eliminated—not documented for continued use.
• Send server logs to the SIEM: Valuable for monitoring and detection, but generally performed as part of logging/monitoring configuration.
• Join the server to the corporate domain: May be necessary operationally, but does not itself harden the server.

• Penetration test: Tests for exploitable vulnerabilities; it does not provide a broad opinion on whether security controls operate effectively.
• Annual self-assessment: Not independent, so it provides less assurance.
• Allow each client the right to audit: Inefficient because every customer may conduct a separate audit, creating duplicated effort and disruption.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Instant messaging/chat: Can be abused to send malicious links or attachments, but P2P file sharing is the more direct high-risk source.
• E-mail: A common malware delivery method, but this question specifically emphasizes an application type associated with direct file exchange.
• End-to-end applications: This describes communication protection or architecture, not a specific application category known for malware distribution.

• Use the grant-date fair value: $30
• Do not remeasure to the year-end value of $45
• Update the estimate of employees expected to vest

• Dr Share-based payment expense $450,000
• Cr Equity/share option reserve $450,000

• Repetitive and time-consuming
• Based on measurable conditions, such as last check-in time
• Easy to automate with alerts, dashboards, or scheduled reports
• Important for ensuring scan coverage

• Assigning custom recommendations usually requires analyst judgment and context.
• Analyzing false positives can sometimes be assisted by automation, but validation often requires human review.
• Rendering an additional executive report increases reporting activity rather than reducing a core operational workload.

• A is correct: It establishes the revised dates and identifies the effect on the critical path.
• B is premature: Stakeholders should be informed after the impact has been assessed and the updated schedule is understood.
• C is not automatically appropriate: Fast-tracking may introduce additional risk and should be considered only after analyzing schedule options.
• D is premature: Adding resources may not resolve a dependency and could increase costs without addressing the actual constraint.

1. Create Workspace2 with Lakehouse2 — F
2. Migrate the Employee table to Lakehouse2 — E
3. Assign the data engineer the Contributor role for Workspace1 — D

Why

• Sharing Lakehouse1 would not provide the required isolation.
• Viewer access would not allow writing to Customer.
• Giving Contributor access to Workspace2 would expose the sensitive table.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or methods used to access organizational resources.

• Partners first log in to the corporate portal, which uses the shared SAML Identity Provider.
• When they select a Salesforce link, the IdP can send a SAML assertion directly to Salesforce.
• Salesforce validates the assertion and grants access to the Partner Community without requiring another login. This is IdP-initiated SSO because authentication begins outside Salesforce.

• SP-initiated SSO starts when Salesforce sends an authentication request to the IdP. That would be appropriate if users began by visiting Salesforce.
• The Web Server and User Agent OAuth flows are for OAuth authorization, not browser-based SAML federation between an IdP and Salesforce.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Root path cost
• Port priority
• Port ID

text 
interface GigabitEthernet0/1 
 spanning-tree vlan 10 port-priority 64

• Interface number: Helps form the port ID but is not normally configured as the preference value.
• VLAN priority: Not used to select a preferred forwarding interface.
• Hello time: Controls how often BPDUs are sent; it does not select a preferred port.

• Ramen is a Linux worm associated with Red Hat Linux 6.2 and 7.0 systems.
• It spreads by scanning randomly generated IP addresses using tools such as synscan.
• It exploits vulnerable network services, including web-related services, and may leave malicious files or altered web content.
• The tar.gz file is also a clue because it is a common Linux archive/package format.

• Code Red: Primarily targeted Microsoft IIS servers running Windows.
• LoveLetter: Spread mainly through email attachments.
• Nimda: A Windows-based worm that spread through email, web servers, and network shares.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

• Business risks
• Potential financial, operational, legal, or reputational impact
• How governance reduces risk to organizational objectives
• How much risk the organization is willing to accept

• MFA adds an additional authentication factor, such as a phone notification or verification code.
• It helps prevent unauthorized sign-ins, even if a password is compromised.
• It does not encrypt, store, or protect credentials used by deployment processes.

• Recovery Services vault — stores Site Recovery configuration and recovery metadata.
• Hyper-V site — represents the on-premises Hyper-V environment.
• Azure virtual network — the target network where the replicated VM will run after failover. Since Azure VMs already use the same virtual network, that VNet can be selected as the target.
• Storage account or managed-disk target, depending on the ASR configuration and portal version.
• Provider/agent on the Hyper-V server — enables replication from Hyper-V to Azure.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Filtering harmful or inappropriate content
• Blocking specified topics
• Detecting and masking sensitive information
• Enforcing content policies suitable for children

• Amazon Rekognition analyzes images and videos; it does not control text generated by a language model.
• Amazon Bedrock playgrounds are for testing models and prompts, not enforcing production safety policies.
• Agents for Amazon Bedrock help models complete tasks and use tools; they do not primarily provide content-safety controls.

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• Plenum: Describes a fire-resistant cable jacket rating, not a transmission medium or speed.
• Ethernet: Describes a networking technology; Ethernet can use copper or fiber, so the term alone does not identify the fastest cable type.
• DAC (Direct Attach Copper): Uses copper and is typically intended for short-distance, high-speed connections in data centers.

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• A. Continue using the current system: It will eventually fail and offers no recovery strategy.
• B. Virtualize the entire system: Correct. A VM can preserve the old OS, application, settings, and dependencies while running on newer physical hardware.
• C. Containerize the application: Containers generally share the host OS kernel and are not suitable for preserving an entire incompatible legacy OS.
• D. Clone the disks to USB: A disk clone may provide backup or temporary recovery, but it does not solve hardware compatibility or provide a reliable long-term platform.

• Warehouse size: Larger warehouses use more credits per unit of time than smaller ones.
• Number of clusters: A multi-cluster warehouse can run multiple clusters, and each active cluster consumes credits. Therefore, increasing the maximum or active cluster count can increase consumption.

• Number of users: More users may cause more workload, but users themselves do not consume credits.
• Amount of data processed: Snowflake warehouses are not charged directly by the amount of data scanned. However, processing more data may cause the warehouse to run longer, indirectly increasing credits.

• A: Concerns task scheduling and avoiding missed runs, not directly sizing the warehouse.
• B: The amount of data in a stream alone does not reliably determine compute needs; the SQL processing is what matters.
• D: A multi-cluster warehouse addresses concurrency, not the compute size needed for one task execution.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• Un AG puede tener réplicas en Windows y Linux desde SQL Server 2017; por tanto, una réplica Windows y otra Linux es posible.
• Sin embargo, las réplicas de un AG deben utilizar normalmente la misma versión principal de SQL Server. Una instancia SQL Server 2017 no puede tener directamente una réplica secundaria SQL Server 2019 como configuración normal y permanente.
• En tu escenario, SQL Server 2017 en Windows y SQL Server 2019 en Linux no se pueden añadir directamente como réplicas equivalentes de AG1. Primero habría que realizar un proceso de actualización/migración compatible, por ejemplo mediante una actualización gradual o una tecnología de migración como log shipping o distributed availability groups, según el diseño.

• Tipo de clúster y mecanismo de quorum.
• Failover normalmente manual en configuraciones multiplataforma.
• Edición y características compatibles.
• Configuración de endpoints y permisos.
• Limitaciones específicas de SQL Server en Linux.

• Minimum
• Maximum
• Average
• Count
• Null/empty values
• Distinct values

• Enable column profile
• Enable details pane
• Show column profile in details pane

• B — Both inner and outer classes can be declared as with sharing.

• C — Inner classes do not inherit sharing settings from the container class.

apex 
public with sharing class OuterClass { 
    public with sharing class InnerClass { 
        // Explicitly uses sharing rules 
    } 
}

• Amazon S3 as the origin for static content
• Application Load Balancer (ALB) as the origin for dynamic content
• Amazon Route 53 configured to point the company’s domain name to CloudFront

• /static/* ? S3 origin; cache content at edge locations
• Dynamic paths such as /api/* ? ALB origin; forward requests to the EC2 application

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

1. Search & Intelligence in the Microsoft 365 admin center — No

1. Audit in the Microsoft Defender portal — Yes

1. Audit in the Microsoft Purview portal — Yes

• contoso.onmicrosoft.com
• contoso1.onmicrosoft.com

• onmicrosoft.com domains: Maximum of five per tenant.
• Custom domains: Domains that your organization owns and verifies in Microsoft 365.

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• A — Correct: Identify the data required by Salesforce, its dependencies, and how it should be validated. Verification scripts help confirm record counts, relationships, field mappings, and data integrity after migration.
• D — Correct: Use a full sandbox and perform trial migrations using realistic—or appropriately masked—legacy data. This exposes transformation, volume, dependency, and integration issues before production cutover.
• B — Less appropriate: Phased user migration and parallel operation primarily address user adoption and rollout risk, not the technical risks of data migration.
• C — Less appropriate: Although sandbox testing and integration testing are valuable, the option emphasizes test-data generation rather than validating the migration with representative legacy data. “A full sandbox for all systems” may also be impractical.