LPI 305-300 Exam Actual Questions
LPIC-3: Virtualization and Containerization - 305, version 3.0 (Page 5 )

• A single Construction Job can use multiple Machinery records.
• A single Machinery record may be used on multiple Construction Jobs.
• This is a many-to-many relationship, which Salesforce models using a junction object.
• The junction object can contain fields such as:

• Master-detail to Machinery
• Master-detail to Construction Job
• Date and cost fields

• Correct choices: A and D.

• Why not B, C, or E?

• An IDS monitors network traffic for signs of attacks and raises alerts. It can be deployed out-of-band (via a SPAN/mirror port or a tap) so it analyzes traffic without being inline, meaning it doesn’t measurably affect latency.
• An IPS (intrusion prevention system) is inline and can block threats, but that processing can introduce some latency and potential throughput impact.
• A firewall also inspects traffic and can add latency, though usually modest with proper hardware, but its primary purpose isn’t continuous passive analysis.
• A load balancer distributes traffic and isn’t used for intrusion analysis.

• Correct answer: D (Special category data)

• Why:

• Quick notes:

• B: Intégrez des résultats de due diligence tels que les évaluations de risque client.

• C: Utilisez des correspondants en aval pour enquêter et signaler les activités suspectes.

• In Microsoft Entra (Azure AD), admin roles can be scoped to either the entire directory (tenant) or to an Administrative Unit (AU). To assign a role at an AU scope, the user must be a member of that AU.

• Roles in question: Security Administrator and User Administrator can be scoped either to the Directory or to a specific AU.

• User1 is a member of AU1. Therefore, User1 can be assigned either at the AU scope (AU1) or at the Directory scope (global).

• User2 is not a member of AU1. Therefore, User2 cannot be assigned at the AU scope; the valid scope for User2 is only the Directory scope.

• User1: can be assigned at AU1 and at Directory scopes.
• User2: can be assigned only at the Directory scope.

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• Network Security Groups (NSGs) control network traffic to and from Azure resources.
• By applying NSGs to the web tier and the database tier (subnets or NICs), you can:

• NSGs provide the necessary granularity (source/destination, port, protocol) to enforce the desired traffic patterns between tiers.
• For easier management you can use separate subnets for each tier or, optionally, use Application Security Groups to simplify rule management.

• Box 1: Azure Lighthouse — ??? ??????? ? ?????????? ????????? ? ?????????? Entra tenants. ??? ??????????? ??? ??? ????? ????? ? VM ? ?????? ?????????/????????.
• Box 2: Azure Monitor Agent ? ?????????????? Data Collection Rules (DCR) — AMA ???????? ??????? Windows (????????, Security Logs) ? DCR ??????????, ????? ??????? ???????? ? ???? ?????????? (? ?????? Log Analytics workspace).

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• Amazon S3 — Object storage, not a database.
• Amazon DynamoDB — Fully managed NoSQL key-value and document database.
• Amazon Redshift — Managed data warehouse designed for analytics, not primarily transactional MySQL workloads.

• S3 Versioning stores all versions of an object. If an object is overwritten or deleted, you can recover the previous version using its version ID.
• This protects against accidental deletion or overwriting because the original data remains accessible as an older version.
• How to enable:

• Practical notes:

• S3 Lifecycle rules: automate moving/expiring data, not specifically protection against deletion.
• S3 bucket policies: control access but don’t inherently preserve previous data.
• S3 server-side encryption: protects data at rest, not against deletion/overwrite.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• A private IP address on the virtual network
• A public IP address associated with its IP configuration

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• The missing piece is to configure an event source mapping between the DynamoDB stream and the Lambda function. Enabling DynamoDB Streams alone doesn’t trigger the function—you must wire the stream to Lambda so events invoke the function.
• Note that changing StreamViewType (A) only affects what data is delivered (e.g., NEW_IMAGE) and does not trigger invocations. Options C and D are not required for invocation: you don’t need SNS, and increasing the timeout won’t enable the trigger.

• The requirement is a fully managed file server that natively supports Microsoft workloads and file systems and uses the SMB protocol. FSx for Windows File Server is built specifically for Windows workloads, provides native SMB file shares, and supports Windows permissions/Active Directory integration.
• Why the others don’t fit:

• Statement 1: Admin1 must approve requests for the Agent ID Developer role — No

• Statement 2: Admin2 can approve requests for the AI Administrator role — No

• Statement 3: Admin3 can assign User1 a two-day active assignment for the Agent ID Developer role — Yes

• What the scenario asks: You have a Power BI semantic model that pulls from multiple sources (Azure SQL Database and SharePoint Online), must support a single dataset for three reports, keep data current (daily refresh by 7 AM PT), and apply RLS to limit sales data by region. You need to choose a storage mode for the tables.

• Correct choice: Dual storage mode.

• Why Dual fits:

• Key concepts:

• A) You can only apply a single template BOM to a service object.

• C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

• B) You can apply many template BOMs to a service object — false; typically only one template per service object.
• D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• runParallel is defined as async, so it returns a Promise.
• To use the result, you attach a then handler (or use await inside another async function).

• A: “Async runParallel() .then(data);” is invalid. “async” is a keyword for function declarations, not something you put in front of a call, and you’d need a function as the then-argument.
• B: “runParallel().done(function(data){return data;});” .done is not standard in native Promises (it exists in some libraries). Without a compatible library, this won’t work.
• C: “runParallel().then(data);” is invalid because then expects a function as its argument; data is not a function.
• D: “runParallel().then(function(data){ return data; });” is valid (or equivalently, runParallel().then(data => data);).

• The robust, standard option is D.
• B could work only with a library that provides .done; otherwise it’s not reliable.

• The app on EC2 connects to Aurora using DB credentials stored on the instance. Secrets Manager centralizes these credentials and can rotate them automatically, eliminating manual updates on each EC2 host.
• Automatic rotation reduces operational overhead and enhances security because credentials are rotated on a schedule without code changes.
• The app can retrieve the current secret at runtime (e.g., via the AWS SDK) and use it to authenticate to Aurora, avoiding reliance on locally stored files.

• B (Parameter Store) can store secrets but lacks seamless built-in rotation for database credentials like Secrets Manager; rotation often requires more custom work.
• C (S3) would require complex tooling to rotate and securely fetch credentials and still risks exposure if access policies aren’t perfect.
• D (Encrypted EBS volumes) would store credentials locally on each instance and does not automate rotation or centralized management.

• D. Provide public endpoints to store and retrieve data

• E. Manage the infrastructure layer and the operating system

• Classifying data
• Configuring access permissions, such as IAM policies
• Selecting or configuring available encryption options, depending on the requirement

• The correct option is B: AWS Storage Gateway.

• Why: The scenario requires backing up on-prem data to AWS without changing existing backup workflows. AWS Storage Gateway provides a hybrid storage solution; specifically, the Tape Gateway emulates a physical tape library, allowing your existing backup software to write to virtual tapes that are stored in AWS (in S3 or S3 Glacier). This lets you back up 10 TB to the cloud while preserving current backup workflows and on-prem infrastructure.

• How it would work: Deploy a gateway appliance or VM on-site, connect your tape-based backup software to the virtual tape library, and start writing to virtual tapes. The data is then archived in AWS, freeing up local storage.

• Why the others aren’t suitable:

• Quick tip: If you weren’t using tape, File Gateway could be another option for file-based backups; Tape Gateway is the right pick for tape-based workflows.

• The first step in risk management is to understand objectives, constraints, and drivers from those who care about the project. This stakeholder engagement helps identify what could go wrong and what risks are most critical.
• Only after you’ve gathered input from stakeholders should you identify risks and document them in the risk register. Updating the risk register (option C) is important, but it comes after identifying and analyzing risks.
• Options B (ensure resources) and D (revise the risk management plan) are actions that may follow once risks are identified and understood; they’re not the initial step.

• Correct answer: A. Email templates

• Snippets are reusable content blocks that you insert into email content, and they require an email template (or at least an email draft) to render.
• You can store region-specific footers as snippets and include them in a template, but there would be nothing to render the snippet into without a template.
• The other options aren’t prerequisites for using snippets:

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• Workspace: Stores notebooks, libraries, jobs, and other project resources.
• Notebooks: Interactive documents containing code, queries, visualizations, and explanations. Common languages include Python, SQL, Scala, and R.
• Clusters: Groups of virtual machines that run Spark workloads. Clusters can be started, stopped, and automatically scaled.
• Data access: Databricks can read from services such as Azure Data Lake Storage, Azure Blob Storage, and Azure SQL.
• Jobs: Automate notebooks or data-processing workflows on a schedule or in response to events.

• Domeny tworza restrykcjony razem z typem. Wykorzystujesz je w kolumnach, aby miec spójna walidacje danych w wielu miejscach.
• To nie jest pelny niestandardowy typ z wlasnym input/output funkcjonowaniem. Aby stworzyc typ z wlasnym I/O i operacjami, uzylbys CREATE TYPE (lub rozszerzen w C). Domeny to uproszczona forma ograniczen na istniejacy typ.

• CREATE DOMAIN positive_int AS integer NOT NULL CHECK (VALUE > 0);
• CREATE TABLE orders (id serial, qty positive_int);

• latwo wymuszaja wspólne reguly dla wielu kolumn/naglówków,
• zmiana regul w jednym miejscu (domena) automatycznie wplywa na wszystkie kolumny ja uzywajace.

• Correct answer: Power BI dataset

• The scenario says the data model already contains several measures and you want to create a report from the existing data with minimal development. Reusing a published Power BI dataset lets you inherit the existing measures and data model, so you don’t have to recreate them.
• How to do it: In Power BI Desktop, use the connector Power BI datasets (Get Data > Power BI datasets) and connect to the existing dataset, then build visuals using the pre-defined measures.
• Why the other options are less suitable:

• Why: If an application on EC2 needs to call other AWS services, using an IAM role (attached to the EC2 instance as an instance profile) provides temporary, automatically rotated credentials. This avoids embedding access keys in the application.
• How it works: Create a role with the minimum required permissions, attach it to the EC2 instance, and let the AWS SDK used by the application retrieve credentials from the instance metadata service. The credentials rotate automatically and are scoped to the policy you define.
• Why not other options:

• prompt: the input or instruction given to the model
• completion: the desired response

json 
{"prompt":"Summarize this customer complaint.","completion":"The customer reports a delayed shipment."}

• B: A .txt file containing CSV-style lines is not automatically a valid fine-tuning dataset. The required structure and format must match the selected Bedrock model.
• C: Provisioned Throughput provides dedicated inference capacity; it does not fine-tune a model.
• D: Journals and textbooks might support domain adaptation or pretraining, but they do not provide the prompt-to-answer examples typically required for supervised fine-tuning.

• Ablauf: Er wird in der gleichen Transaktion ausgeführt, bei der z. B. ein Datensatz erstellt oder aktualisiert wird. Der Benutzer wartet, bis der Workflow abgeschlossen ist.
• Stufen: Kann vor dem Vorgang (pre-operation) oder nach dem Vorgang (post-operation) laufen.
• Zweck: Sofortige Validierung oder Anpassung von Daten, ggf. auch das Verhindern eines Vorgangs, wenn Bedingungen nicht erfüllt sind.

• Automatisierte Flows (Power Automate, automatisierte/ Background Flows) laufen asynchron im Hintergrund, nachdem der Trigger erkannt wurde, und blockieren den Benutzer nicht.

• IKE: Negotiates security parameters for IPsec VPNs; it does not identify switch ports.
• VLAN: A logical network segmentation method, not a discovery protocol.
• netstat: Displays local network connections and listening services, but cannot identify the physical switch or port.

powershell 
Get-AzureVM -ServiceName <service-name> -Name <vm-name> | 
  Set-AzureStaticVNetIP -IPAddress <private-ip> | 
  Update-AzureVM

• New-AzureRMVMConfig configures VM settings but does not itself assign the static IP.
• Set-AzureSubnet is not the appropriate cmdlet for assigning a VM’s private IP.
• The Azure portal option mentioned in the question was not the intended method for this older deployment model.
• Changing settings in Windows Network and Sharing Center is incorrect because Azure assigns the IP through the VM’s virtual network interface; manually configuring it inside the guest can cause conflicts.

• B — Prompts and suggestions retained for 28 days
• C — User engagement data kept for two years

• The key distinction is between content data—your prompts, code context, and generated suggestions—and engagement data, such as usage activity.
• Do not confuse retention with training: enterprise Copilot data is generally not used to train GitHub’s models without appropriate authorization.
• For a current exam, verify the policy version cited by the exam provider. The key’s C is likely correct, but B should be treated cautiously and may no longer reflect the current policy.

• AWS IoT Greengrass supports local ML inference using models trained in Amazon SageMaker.
• The model and inference code run on the factory’s local server, so processing continues even when internet connectivity is unavailable.
• A Greengrass component can:

• This provides low latency and avoids sending images to AWS for every inference.

• A: Uses AWS-hosted services and therefore depends on internet connectivity. It would fail during an outage.
• C: Snowball Edge is unnecessary for this use case and adds deployment complexity. A local Greengrass server is the intended edge-inference solution.
• D: Amazon Monitron is designed for monitoring industrial equipment health, not analyzing camera images with a custom SageMaker model.

• Correct answer: UBA (A)

• Why: UBA (User Behavior Analytics) analyzes user activity, builds baselines of normal access patterns, and flags deviations (e.g., accessing sensitive projects not related to the user’s role). This insider-threat detection is exactly what the scenario requires.

• Why not the others:

• You provision the virtual machine.
• You manage the guest operating system, applications, and configuration.
• Azure manages the physical servers, datacenter, and underlying virtualization infrastructure.

• DNS????????????????

• ???????????

• ????????????????

• Sales Processes define the set of Opportunity stages for a given workflow.
• Record Types let you have different data models (different fields and picklist values) on the same object.
• Page Layouts control which fields are shown/required for each record type.

• Create three Sales Processes so each team can use its own stages.
• Create three Record Types so each team has its own fields and picklist values.
• Create three Page Layouts so each record type shows the appropriate fields.

• Correct answer: B (No, it does not).

• A purchase agreement in Dynamics 365 SCM is a vendor-side price arrangement. It sets prices/discounts for what your company buys from suppliers, not for what you sell to customers.
• The objective in Question 2 is to give clients a quantity-based discount on items they purchase from you. To accomplish this, you should configure a sales price / trade agreement (on the customer/sales side), not a purchase agreement.
• In a sales price trade agreement, you can define quantity breaks such as:

• Create a Sales price trade agreement for the item and relevant customer (or customer group).
• Add quantity breaks: 51–100 with 10% discount, 101+ with 15% discount.
• Ensure the agreement is active for the desired date range.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• Correct choice: Box 1 = Yes, Box 2 = Yes, Box 3 = No (Answer: A)

• Box 1: Yes – Microsoft Purview Compliance Manager provides a risk-based compliance score that helps you understand your overall compliance posture. The score reflects how well you’re meeting regulatory requirements and internal policies.
• Box 2: Yes – It also offers step-by-step remediation guidance through actionable “improvement actions.” These guide you to implement fixes and align controls, often with links to the relevant consoles.
• Box 3: No – Compliance Manager is not part of Microsoft Defender. It is part of Microsoft Purview. Defender is a separate security product family, while Compliance Manager is in Purview for compliance risk and remediation.

• Use Purview Compliance Manager to view your compliance score and follow improvement actions.
• Improvement actions provide actionable steps and guidance for remediation.
• Defender and Purview are distinct services; do not confuse their scopes.