Microsoft DP-420 Exam Prep
Designing and Implementing Cloud-Native Applications Using Microsoft Azure Cosmos DB (Page 2 )

1. Clear principles and boundaries — Employees have freedom, but decisions must remain within clear organizational values, policies and limits.
2. High degree of freedom — Managers are trusted to make decisions rather than seeking continual approval from senior management.
3. Frontline customer responsibility — Customer-facing managers should be empowered to manage customer relationships and respond quickly to needs.
4. Transparent and ethical information — Information should be openly available and used honestly, supporting trust and informed decision-making.

• A static IP gives the surveillance system a predictable local address, so users can reliably reach it on the LAN.
• However, a static IP does not block internet-based login attempts. If the router exposes the device through port forwarding, attackers could still reach it.
• Port mapping normally exposes an internal service externally, so A is a poor choice as written.
• Subnetting alone also does not block traffic; it would require routing/firewall rules.

• Matching hashes: The software is unchanged.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality.
• Baselines: Define approved configurations or normal performance.
• Tokenization: Replaces sensitive data with tokens.

• BCP (Business Continuity Plan): Ensures the organization can continue its broader business operations during and after a disruption. It is broader than the IT-focused recovery required here.
• Communication plan: Defines how information is shared with employees, the public, and other stakeholders; it does not restore systems.
• IRP (Incident Response Plan): Handles and contains security incidents, such as malware or unauthorized access. A tornado is a disaster, not primarily a cybersecurity incident.

• B: Moving the task may affect the critical path and should not be done before evaluating the planned response and impacts.
• C: Excluding a required task is not appropriate without formal analysis and stakeholder approval.
• D: Lessons learned and the risk log should be updated, but only after or alongside managing the immediate issue; updating them is not the first action.

• DB1 (500 TB): Azure Data Box Heavy

• Virtual machines: Azure Migrate

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.

• Looking up accounts, contacts, and opportunities
• Logging calls and updating Salesforce records
• Accessing previously available customer information when temporarily offline

• Salesforce Touch App: Primarily an older tablet-focused experience, not the best general solution for the sales team.
• Custom hybrid app: Unnecessary development when Salesforce provides the required capabilities natively.
• SalesforceA: Intended mainly for Salesforce administrators, not sales representatives.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• A vulnerability scanner automates discovery of known vulnerabilities and misconfigurations across systems. It can contribute to a supply-chain assessment.
• A penetration test actively attempts exploitation and is usually limited to an agreed scope.
• SCAP standardizes vulnerability and configuration assessment data; it is not the analysis itself.
• Illumination tool is not a commonly defined CompTIA Security+ term.

• Filtering or reshaping columns
• Joining with an analysis-specific dataset
• Creating calculated fields
• Applying business logic for a particular project

• Data blending: Combining different data sources, not specifically the final processing step.
• Data enhancement: A broad term for enriching data.
• Data testing: Checking data quality or pipeline correctness.
• Last-mile ETL: The precise term for additional transformations performed after the main pipeline, often directly before analytics or reporting.

• SharePoint search: Finds documents based on search terms, but it does not reliably identify every 32-character account number for DLP enforcement.
• A hunting query in Microsoft 365 Defender: Used for security investigations, not for defining sensitive content in a DLP policy.
• Azure Information Protection: Uses classification and labeling; it does not automatically identify this specific account-number pattern unless configured with a matching sensitive information type.
• RegEx pattern matching: Best suited for structured identifiers with a known format, such as account numbers, employee IDs, or policy numbers.

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• Import: Copies data into the Power BI model. It requires scheduled or manual refresh, so it may not meet the two-minute requirement.
• Live connection: Connects to an existing Power BI semantic model or Analysis Services model; it is not the appropriate choice for connecting directly to the Azure SQL database in this scenario.

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• principal represents the source or initiating system.
• principal.port is the source port.
• target represents the destination system.
• target.port is the destination port.

text 
principal.port = 5555

• network.ApplicationProtocol = HTTP identifies HTTP traffic but not the backdoor specifically.
• target.port = 5555 finds traffic going to port 5555, rather than originating from it.
• network.ip_protocol = TCP is too broad because many services use TCP.

• SQL injection
• Cross-site scripting (XSS)
• Malicious file uploads
• Common web-application exploits

• Layer 4 firewall: Filters primarily by IP addresses, ports, and transport protocols; it lacks detailed web-application inspection.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specialized for protecting web applications.
• UTM: Combines several security functions in one device, but it is not specifically focused on web-application attacks.

1. Which host originated the infection

1. Which remaining hosts are infected

• Unfamiliar locations or IP addresses
• Anonymous or malicious IP addresses
• Leaked credentials
• Unusual sign-in behavior

• Resources that do not need internet access should remain on private network segments.
• Internet-facing access should be restricted to systems that require it.
• Access should be explicitly allowed rather than broadly exposed.

• A: A single administrator with access to core functions may violate least privilege if that access is broader than necessary.
• B: Inspecting traffic supports monitoring and defense, but does not itself limit privileges.
• C: Updating routing configurations supports availability and connectivity, not least privilege.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• Tokenization: Replaces the value with a nonsensitive token, often reversible through a secure token vault.
• Hashing: Converts data into a one-way fixed-length value, generally used for integrity checks or password storage.
• Obfuscation: A broad term for making data difficult to understand; it is less precise than masking in this context.

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• B. The community must be built with the Customer Account Portal template.

• C. An experience ID (expid) or placeholder parameter must be used in the URL.

• A: The Visualforce + Salesforce Tabs template does not provide this dynamic branding capability.
• D: An external CMS is not required. The branding configuration is handled within Salesforce Experience Cloud.

• R-squared: Typically used for regression, not classification.
• RMSE: Measures prediction error for continuous numerical values, so it is not the best fit here.
• Learning rate: A training hyperparameter that controls how quickly the model updates its weights; it is not an evaluation metric.

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• B — Reviewing the strategy: Usually performed by a security steering committee or other governance body.
• C — Communicating the strategy: The security manager may help communicate it, but communication is not the primary governance responsibility tested here.
• D — Approving the strategy: Approval belongs to executive management or the appropriate governing authority, not the person who develops it.

1. The sender hashes the original message and sends the message plus its hash.
2. The receiver applies the same hashing algorithm to the received message.
3. The receiver compares the newly calculated hash with the sender’s hash.
4. Matching values indicate that the message was not altered in transit.

• A binary image is not the normal description of a hash result.
• Using a different algorithm produces a different type of digest, so the values cannot be directly compared.
• Hashing verifies integrity, but by itself does not prove who sent the message. Digital signatures or MACs address authentication and integrity together.

• Blue team: Defends systems, monitors activity, and responds to attacks.
• Purple team: Coordinates red- and blue-team activities to improve defenses.
• White team: Oversees or manages the exercise, including rules and scope.

• If the Facebook user is new, Salesforce invokes createUser.
• If the user already exists, Salesforce can invoke updateUser.
• The handler can read the latest data from Facebook, such as name, email, or other profile attributes, and update the corresponding Salesforce user.

• B: A scheduled job is unnecessary and would not provide real-time synchronization during authentication.
• C: A Facebook signed request is not the standard mechanism for updating Salesforce user records in this authentication-provider setup.
• D: SAML Just-in-Time provisioning applies to SAML identity providers, not Facebook OAuth authentication.

• Suporta domínios personalizados.
• Oferece 50 GB de armazenamento — suficiente para os 10 GB de cada aplicação.
• Usa instâncias de computação dedicadas.
• Inclui balanceamento de carga entre instâncias.
• É o plano mais econômico entre as opções que atendem a todos esses requisitos.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

1. You try to access a cloud application, such as accounting software.
2. The application redirects you to the company’s IdP.
3. You authenticate with the IdP.
4. The IdP sends a digitally signed SAML assertion to the application.
5. The application validates the assertion and grants access.

• The user’s identity
• Whether authentication succeeded
• Roles or group membership
• Access-related attributes

• A — Increasing the minimum password length to 14 characters: Longer passwords have more possible combinations, making them harder to guess or crack through brute force.
• F — Requiring at least one special character: This increases password complexity and expands the possible character combinations.

• MD5 to SHA-512: Improves password-hash resistance, but does not stop users from choosing easy-to-guess passwords. Also, modern systems should use a password-specific hashing algorithm such as bcrypt, scrypt, or Argon2.
• Increasing maximum age to 120 days: Leaves weak passwords in use longer.
• Reducing minimum length to 10: Makes guessing easier.
• Reducing minimum age to zero: Allows immediate password changes but does not make the password itself harder to guess.

• A: Describes a broad purpose and direction, but is not the specific CIMA definition.
• C: “Scoping out” activities is too vague and incomplete.
• D: Combines long-term goals, strategies and policies, but describes a wider strategic-planning statement rather than the definition of strategy itself.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• Access controls — ensuring only authorized users can access it.
• Encryption — protecting the data if it is intercepted or exposed.

• Honeypots: Decoy systems or services made to attract attackers. Legitimate users should not interact with them, so activity there is a strong indicator of malicious behavior.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system. This can reveal infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies and analyzes potential threats before or during system design.
• Data obfuscation: Makes data harder to understand or interpret.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• Install unauthorized or unapproved applications
• Access system areas normally restricted
• Add features unavailable in the default software
• Modify the device’s operating system

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects malicious scripts into web pages viewed by users.
• Sideloading: Installs an application from outside the official app store, but it does not necessarily remove the phone’s operating-system restrictions.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• A: Configure security groups — Customers define inbound and outbound rules for resources such as Amazon EC2 instances.
• B: Classify company assets — Customers decide how their data and assets should be classified and protected.

• C: Amazon S3 is a regional service; customers select a Region, not individual Availability Zones for buckets.
• D: AWS manages the infrastructure and patching for Amazon DynamoDB.
• E: AWS manages the infrastructure used by AWS Lambda; customers do not select EC2 instances for Lambda functions.

• An Azure pay-as-you-go subscription follows an operational expenditure (OpEx) model.
• With OpEx, the organization pays for services as they are used, typically based on consumption.
• There is no need to purchase and maintain physical servers upfront.
• This contrasts with capital expenditure (CapEx), where the company makes a significant upfront investment in infrastructure, such as on-premises Hyper-V hosts.

• The application failing to start or becoming unhealthy
• An incorrect probe path, port, or protocol
• The application needing more startup time
• Dependency or configuration failures
• A liveness probe being too aggressive

bash 
kubectl describe pod <pod-name> 
kubectl logs <pod-name> --previous

• Scale to more replicas: may hide the issue but does not diagnose it.
• Decrease initialDelaySeconds: makes probes run earlier and could worsen startup failures.
• Drain and reboot the node: node metrics are normal, so rebooting is not justified as the first step.