A NetApp AFF node in a four-node cluster has a single FC port on one node, which Is used for legacy tape backup. Tape is no longer needed, and the port is disconnected and modified for reuse in the FCP SAN.Based on this change, which command will verify that the port is usable?
Answer(s): C
To verify that a modified FC port is usable after it has been repurposed from tape backup to FCP SAN, the command system node hardware unified-connect show should be used. This command checks the status and configuration of the unified connect hardware, ensuring that the port is correctly set up for the new function in the SAN environment.For additional details, see:NetApp Command Reference
A customer requires multiple SAN and NAS protocols on a NetApp AFF cluster. The cluster must concurrently serve a namespace over NVMe/FC, a LUN over FCP, a LUN over iSCSI, and an NFS export.Based on these requirements, what is the minimum data SVM count that is required?
To concurrently serve a namespace over NVMe/FC, a LUN over FCP, a LUN over iSCSI, and an NFS export, only one data SVM (Storage Virtual Machine) is required. NetApp ONTAP allows a single SVM to support multiple SAN and NAS protocols simultaneously, enabling efficient and consolidated management of storage resources.For more information, refer to:NetApp Documentation on SVM ConfigurationNetApp SVM Best Practices
A customer needs to verify if jumbo frames have been configured correctly for an ISCSI workload.Which command should be used?
Answer(s): B
To verify if jumbo frames have been configured correctly for an iSCSI workload, the command ping - lif <LIF> -vserver <SVM> -destination <IP> -disallow-fragmentation true -packet-size 9000 should be used. This command tests the network path with the jumbo frame size (9000 bytes) and ensures that the packets are not fragmented, confirming that jumbo frames are supported end-to-end.For more details, you can check:NetApp Documentation on iSCSI ConfigurationNetApp Community Discussions on Jumbo Frames
An administrator runs the lun igroup show -insrar.ee command on a NetApp ONTAP SAN.Based on the output, what is the initiator type?
Answer(s): D
Based on the output of the command lun igroup show -instance, which lists the protocol as fcp and the initiator as server1.netapp.com, the initiator type is WWPN (World Wide Port Name). In Fibre Channel Protocol (FCP) environments, WWPNs are used to uniquely identify Fibre Channel devices. This contrasts with IQNs used in iSCSI, and NQNs used in NVMe over Fabrics.For more details, refer to:NetApp Documentation on Initiators
A storage engineer is required to provide NetApp site design documentation to show that the NetApp ONTAP SAN solution was delivered as intended.Which NetApp tool can the storage engineer use to automate the creation of a difference report?
Active IQ OneCollect is a NetApp tool designed to collect configuration and performance data from your storage environment, including SAN solutions. It can automate the creation of difference reports by capturing the current state of the system and comparing it against a baseline, thereby showing any changes or deviations from the intended design.For further details, refer to:NetApp Active IQ OneCollect Documentation
Post your Comments and Discuss Network Appliance NS0-521 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the NS0-521 content, but please register or login to continue.