NVIDIA NCP-AIN Exam Prep
AI Networking (Page 3 )

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• Primary and core nodes: Use On-Demand Instances because the workload is business-critical. These nodes manage the cluster and store/process HDFS data.
• Task nodes: Use Spot Instances in an instance fleet. Task nodes are suitable for interruption because they do not hold essential cluster data and can be replaced or diversified across instance types.
• Terminate the entire cluster after processing: The job runs only about six hours each morning, and EMRFS stores data in Amazon S3. Keeping the cluster running for the rest of the day would waste money.

• A: Using Spot for primary and core nodes risks interruption of the critical cluster.
• C: All On-Demand is reliable but unnecessarily expensive; terminating the cluster helps, but Spot task nodes provide greater savings.
• D: Leaving primary and core nodes running after the task finishes continues to incur costs. Savings Plans also are less appropriate for this intermittent workload.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• Create a record-triggered Flow on Opportunity.
• Run it when the record is created or updated.
• Add entry criteria such as Probability > 50%.
• Use Create Records to create the related Sales Demo Request, populating its Opportunity lookup.

• Apex Trigger: Possible, but unnecessary custom code for a straightforward automation requirement.
• Workflow Rule: Cannot create a related custom record.
• Process Builder: Could create a record, but Flow is Salesforce’s preferred and more capable declarative automation tool.

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• Online payment fraud
• Account takeover
• Fake account creation
• Suspicious transactions

sql 
SELECT COUNT(*) FROM table;

• A: It does not normally need to scan all data files for this operation.
• B: Results are not simply reused from a query cache every time. Caching is separate from Delta’s metadata optimization.
• D: The relevant metadata is maintained through the Delta transaction log, not directly treated as a Parquet-file metadata operation in this context.

• Detect risky sign-ins from unfamiliar or unidentified IP addresses
• Evaluate user or sign-in risk
• Automatically require a password change because of a risky sign-in

• User risk policy: Can require a user to securely change their password when the account may be compromised.
• Sign-in risk policy: Can require MFA or block access based on the risk of a particular sign-in.

• Basic: No technical or architectural guidance.
• Standard: Technical support, but not the required design-assessment service.
• Professional Direct: Provides advisory and architecture guidance.
• Premier: Provides it too, but is unnecessarily expensive for this requirement.

• B. Data loss prevention (DLP): Helps prevent sensitive data from being copied, emailed, or exfiltrated. It is not the primary control for protecting a stolen laptop’s stored data.
• C. Operating system hardening: Reduces vulnerabilities by disabling unnecessary services and applying secure settings, but it does not necessarily protect the files if the disk is accessed directly.
• D. Boot security: Helps ensure the device starts only through trusted software or approved processes. It supports platform integrity but does not itself encrypt stored files.

• Red team: Simulates attackers; exploits weaknesses to test security.
• Blue team: Defends systems; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team efforts to improve detection and defense.
• White team: Oversees or manages the test, defining rules, scope, and authorization.

• B: Trigger.Once + scheduled job

• C: 10-minute processing-time trigger

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• A. Tuning system software: This is a corrective action, not an analysis method. Tuning should be based on measured performance data.
• B. User dissatisfaction reports: Useful as an indicator, but subjective and insufficient for diagnosing the cause.
• D. Off-peak utilization and response time: This may hide problems occurring during peak periods. Performance analysis should cover representative or peak workloads.

• Remote and global access: Employees can authenticate from anywhere, not just a specific location.
• Seamless login: The device can authenticate in the background, reducing repeated password or MFA prompts.
• Minimal equipment: It uses devices employees already have, rather than requiring separate hardware.

• Geotagging: Identifies location but is not a complete authentication method and can be spoofed.
• Smart cards: Can provide strong authentication, but require cards and often readers, adding equipment and user steps.
• Time-based logins: Restrict access by time but do not verify the user or device adequately.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Program and project management
• Risk management
• Cloud financial management
• Data governance
• Portfolio management

• Sustainability
• Performance efficiency
• Reliability

text 
heartrateheartrateheartrate

• Spark column objects can be multiplied, for example:

python 
  df["heartrate"] * 3

• A DataFrame itself cannot be multiplied, but the expression is referring to a column.
• It is also not primarily a Python syntax error; the code was parsed, then Spark failed while resolving the column name.

• Creating and managing users and roles
• Granting and revoking roles and privileges
• Managing access-control responsibilities

• SYSADMIN: Manages warehouses, databases, schemas, and other objects—not primarily users and roles.
• PUBLIC: Automatically granted to every user; it is not an administrative role.
• ACCOUNTADMIN: Has the highest level of access, but should be reserved for account-level administration and emergencies rather than routine security tasks.

• IKE: Negotiates security parameters for IPsec VPNs; it does not identify switch ports.
• VLAN: A logical network segmentation method, not a discovery protocol.
• netstat: Displays local network connections and listening services, but cannot identify the physical switch or port.

• BCP: Maintains essential business operations during and after disruption. It is broader than IT recovery, but the question focuses on restoring the destroyed data center.
• Communication plan: Defines how the organization communicates with staff, the public, and other stakeholders.
• IRP: Handles security incidents such as malware, unauthorized access, or data breaches—not physical disaster recovery.

• Idioma: “Responda em português.”
• Tamanho: “Responda em até três frases.”
• Formato: “Use uma lista com três recomendações.”
• Objetivo: “Recomende produtos com base nas necessidades do cliente.”

• Mudar o tamanho do LLM: pode alterar capacidade e custo, mas não garante idioma ou respostas curtas.
• Aumentar a temperatura: aumenta a criatividade e a aleatoriedade; não controla diretamente o tamanho ou idioma.
• Aumentar o Top K: permite considerar mais tokens prováveis, aumentando a variedade; também não é o mecanismo principal para controlar idioma ou comprimento.

• Create and manage catalogs of approved IT services
• Govern and publish infrastructure-as-code (IaC) templates, commonly AWS CloudFormation templates
• Control which users can deploy specific products and configurations
• Apply versioning, permissions, and deployment constraints

• AWS Resource Explorer: Searches and discovers AWS resources; it does not govern IaC templates.
• AWS Organizations: Manages multiple AWS accounts, policies, and consolidated billing.
• AWS Systems Manager: Helps operate and manage deployed resources, such as patching and automation, but is not primarily a catalog for governed IaC products.

• A Layer 2 switch checks the destination MAC address in its MAC address table (CAM table).
• If the destination MAC is unknown, the switch cannot select a specific outgoing port.
• It therefore performs unknown-unicast flooding, sending the frame out every other port in that VLAN.
• The frame is not sent back through the port where it arrived.

• A. Modify CommunitiesSelfRegController

• C. Configure Communities registration to use a custom Visualforce page

• B. Modify the self-registration trigger — There is no standard “self-registration trigger” intended for this configuration. The registration logic is handled by the Visualforce controller.
• D. Configure a custom Apex controller — The standard approach is to modify the provided CommunitiesSelfRegController, rather than simply selecting a separate controller configuration.

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.

• A — Reports: Reports are informational and don’t enforce access during an SSO transaction.
• B — Apex trigger and Permission Sets: A trigger could update permissions when a Case changes, but this creates synchronization and timing issues. It also changes Salesforce permissions rather than making a direct, real-time decision for the external system.
• C — Custom SAML JIT Provisioning: JIT provisioning is primarily for creating or updating users at login. It isn’t the appropriate mechanism for dynamically querying business records and deciding whether access should be granted.
• D — Connected App Handler: Designed for custom, programmatic control during connected-app authentication and authorization. Apex can check the user’s current open classified cases and permit or reject the SSO request.

• Personally identifiable information (PII) detection

• Prompt Shields

• Self-harm content filtering addresses self-harm-related content.
• Violence content filtering addresses violent content.
• Neither protects customer PII or detects document-based prompt injection.

• Issuer: Identifies the party issuing a SAML message—usually the identity provider in the assertion. It is not the Salesforce-specific identifier the architect should provide for differentiating Salesforce.
• Identity Provider Login URL: The endpoint where users are sent to authenticate.
• SAML identity location: Determines where the user identity is found in the SAML assertion, such as the subject or an attribute.

• A. Microsoft 365 group with Assigned membership
• C. Microsoft 365 group with Dynamic User membership

Why?

• Assigned membership: You explicitly add User1, User2, and User3.
• Dynamic User membership: Membership is automatically determined by a rule based on user attributes.

Why the other options are incorrect

• B and D: Security groups do not support the Microsoft 365 group expiration policy.
• E: Dynamic Device groups are intended for devices, not these users, and are also security groups.

1. You try to access a cloud application, such as accounting software.
2. The application redirects you to the company’s IdP.
3. You authenticate with the IdP.
4. The IdP sends a digitally signed SAML assertion to the application.
5. The application validates the assertion and grants access.

• The user’s identity
• Whether authentication succeeded
• Roles or group membership
• Access-related attributes

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• administrators — Full access to switch configuration and REST API functions; excessive for this requirement.
• sysadmin — Intended for highly privileged system administration, not basic monitoring.
• helpdesk — More limited and focused on troubleshooting/support functions; it does not match the stated default role and level-1 requirement as directly.

• B — AWS DataSync: Transfers data between storage systems, such as S3, file systems, and on-premises storage. It is not a marketplace or catalog for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit is a source-code repository, not a third-party data provider. Kinesis is for streaming data ingestion.
• D — Kinesis Data Streams and ECR: ECR stores container images, not datasets. Kinesis does not provide access to ECR data as an external dataset source.

1. Start with the 48-bit MAC address.
2. Split it into two 24-bit halves.
3. Insert FF:FE between the halves, creating a 64-bit value.
4. Invert the U/L bit—the seventh bit from the left in the first MAC byte.

text 
MAC:       00:1A:2B:3C:4D:5E 
EUI-64:    02:1A:2B:FF:FE:3C:4D:5E

• FE80 is the prefix commonly used for an IPv6 link-local address, not part of the EUI-64 interface ID.
• The interface ID is not random.
• The MAC address is modified by inserting FF:FE and changing the U/L bit.

• Hardware and infrastructure
• System software
• Networks and communications
• Technology platforms and services

• Business Architecture: Defines business strategy, organization, functions, and processes.
• Data Architecture: Defines the structure and management of enterprise data.
• Application Architecture: Describes application systems and how they interact to support business and data processing.

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• Server provisioning
• Operating systems and runtime infrastructure
• Scaling
• Much of the maintenance and patching

• Thin clients reduce endpoint hardware requirements but do not specifically streamline code deployment.
• Private cloud provides dedicated cloud infrastructure but usually requires more management and expense.
• Virtual machines improve resource utilization, but administrators still manage the VMs, operating systems, and deployments.

• Fileless malware: Nothing in the command indicates malware executing only in memory.
• Living-off-the-land binaries: Mimikatz is a credential-access tool, not a normal system utility used for LOLBin abuse.
• Social engineering: The command shows technical credential abuse, not manipulation of an accountant.

python 
def add_integers(a, b): 
    return a + b

• Uses def to define a function.
• Accepts two parameters, a and b.
• Uses return to send their sum back to the caller.
• Uses indentation to define the function body.

python 
result = add_integers(3, 4) 
result is 7

• Aggregation happens once, during the scheduled job.
• Dashboard users query a relatively small, precomputed table.
• Repeated users do not trigger expensive aggregations against the detailed sales table.
• Overwriting is appropriate because the summary is rebuilt for the reporting period.

• B: Structured Streaming is unnecessary for data that only needs daily refreshes and adds operational/compute overhead.
• C: A view recomputes the aggregation at query time, increasing latency and query cost.
• D: Delta caching may improve reads but does not replace the need to materialize the expensive aggregation, and cache availability is not the main design guarantee.

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.

• Looking up accounts, contacts, and opportunities
• Logging calls and updating Salesforce records
• Accessing previously available customer information when temporarily offline

• Salesforce Touch App: Primarily an older tablet-focused experience, not the best general solution for the sales team.
• Custom hybrid app: Unnecessary development when Salesforce provides the required capabilities natively.
• SalesforceA: Intended mainly for Salesforce administrators, not sales representatives.

• Subject: The entity that initiates an action—here, Derrick/user account.
• Object: The resource being accessed— the file.
• Action: Reading the file.