Quality Assurance CSQA Exam Prep
Certified Software Quality Analyst (CSQA) (Page 88 )

• Remote and global work: Access is based on the approved device, not a specific office or geographic location.
• Seamless login: Users may not need to repeatedly enter credentials on a recognized device.
• Limited equipment: It uses devices employees already have rather than requiring separate hardware.

• Geotagging: Restricts access based on location and may prevent legitimate remote work.
• Smart cards: Require issuing and managing additional physical equipment.
• Time-based logins: Limit access by time and do not provide a seamless authentication experience.

• One physical NIC is active and carries traffic.
• Another NIC remains on standby.
• If the active uplink fails, traffic switches to the backup uplink.
• This provides redundancy without requiring special switch-side link aggregation configuration.

• Balance-SLB: Distributes traffic based on source load balancing; not the default.
• Balance-TCP: Uses dynamic TCP traffic balancing and generally requires appropriate network-switch configuration.
• No Uplink Bond: Incorrect because vs0 is normally configured with redundant uplinks.

• Internal audit: Reviews the organization’s own controls and processes.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.
• Attestation: A SOC 2 report is an attestation product issued by an independent auditor, but the analyst is not performing the attestation. They are reviewing it as part of vendor evaluation.

• Maximum response and resolution times
• Expected uptime or availability
• Performance requirements
• Escalation procedures
• Consequences for failing to meet requirements

• SOW: Defines a project’s scope, tasks, deliverables, and schedule.
• MOA: Documents specific responsibilities agreed upon by two parties.
• MOU: Records a general understanding or intent to cooperate.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• Employees can work from any location, including remote sites and offices worldwide.
• Login can be relatively seamless after the device is registered.
• It does not require distributing additional physical authentication equipment.

• Geotagging: Identifies location, but location alone is not a strong authentication method and may prevent legitimate remote access.
• Smart cards: Provide strong authentication but require card readers and physical cards, increasing equipment and management requirements.
• Time-based logins: Typically involve one-time codes that users must enter, making the experience less seamless and potentially requiring a token or authenticator app.

• Product recall: Premature before confirming a violation or assessing risk.
• Notify the regulatory authority: May be required later, especially if the discrepancy affects safety or compliance, but first investigate and verify the facts.
• Inform production: Not the initial regulatory assessment step; production may become involved if a packaging or manufacturing error is identified.

• Disable default accounts: Default or unused accounts may have known usernames or predictable settings, making them targets. They should be disabled, removed, or securely configured.
• Remove unnecessary services: Every running service creates potential vulnerabilities. Removing services the server does not need reduces exploitable entry points.

• Add the server to the asset inventory: Important for asset management, but not a hardening step.
• Document default passwords: Default passwords should be changed or eliminated—not documented for continued use.
• Send server logs to the SIEM: Valuable for monitoring and detection, but generally performed as part of logging/monitoring configuration.
• Join the server to the corporate domain: May be necessary operationally, but does not itself harden the server.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• A is correct: It establishes the revised dates and identifies the effect on the critical path.
• B is premature: Stakeholders should be informed after the impact has been assessed and the updated schedule is understood.
• C is not automatically appropriate: Fast-tracking may introduce additional risk and should be considered only after analyzing schedule options.
• D is premature: Adding resources may not resolve a dependency and could increase costs without addressing the actual constraint.

• A. Continue using the current system: It will eventually fail and offers no recovery strategy.
• B. Virtualize the entire system: Correct. A VM can preserve the old OS, application, settings, and dependencies while running on newer physical hardware.
• C. Containerize the application: Containers generally share the host OS kernel and are not suitable for preserving an entire incompatible legacy OS.
• D. Clone the disks to USB: A disk clone may provide backup or temporary recovery, but it does not solve hardware compatibility or provide a reliable long-term platform.

• SQL injection: Manipulates database queries through application input.
• XML external entities (XXE): Abuses XML parsers to access files, internal systems, or other resources.
• Cross-Site Request Forgery (CSRF): Tricks an already authenticated user’s browser into sending an unwanted request. It generally does not steal session cookies.

Box 1: No

• configure_azure_monitor() configures Azure Monitor and the OpenTelemetry pipeline.
• LangChain requires its own instrumentation or callback tracer, such as AzureAIOpenTelemetryTracer.
• You must pass the tracer to the LangChain execution configuration so chains, tools, prompts, and model calls become spans in Application Insights.

Box 2: Yes

text 
OTEL_SERVICE_NAME=customer-agent 
OTEL_SERVICE_NAME=invoice-agent

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• Third-party attestation: Provides independent confirmation, often for formal compliance reporting, but is not usually performed frequently.
• Penetration testing: Attempts to exploit vulnerabilities; it focuses on technical security, not overall compliance procedures.
• Vulnerability scans: Identify known technical weaknesses in systems, but do not evaluate whether policies and processes meet compliance requirements.

• Espionage: Stealing information, usually for competitive or political purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or access methods used by employees.

• Reduce the training data: Usually makes overfitting worse.
• Add hyperparameters: Hyperparameters already control training; simply adding them does not solve the problem. Proper tuning could help, but that is not what the option states.
• Increase training time: More training can worsen overfitting if the model is already memorizing the training data.

1. Search & Intelligence in the Microsoft 365 admin center — No

1. Audit in the Microsoft Defender portal — Yes

1. Audit in the Microsoft Purview portal — Yes

Why this is correct

• Each user authenticates with their own Google account.
• Google manages the user’s SSH key association.
• IAM controls who can access instances.
• Access can be audited by user identity, so security can determine who accessed a VM.
• Granting the role to a Google group avoids managing permissions individually.

Why the others don’t apply

• A: A shared private key is difficult to distribute securely and cannot reliably identify which employee used it.
• B: Manually collecting and deploying keys on every instance is operationally inefficient and complicates auditing.
• D: A project-wide shared key has the same identity and key-management problems as option A. It also does not provide per-user accountability.

• 24 cores: Available in the Business Critical provisioned-compute configurations.
• Approximately 124 GB memory: Matches the memory capacity of the relevant Business Critical hardware configuration.
• More than 50,000 IOPS: Business Critical uses local SSD storage and provides the high I/O performance required here.
• 500 GB storage: Well within the tier’s supported capacity.

• Premium: The DTU-based Premium tier does not provide the required combination of compute, memory, and I/O characteristics.
• Hyperscale: Hyperscale is primarily intended for very large databases and independent storage scaling. It is not the best match for these specific high-memory and high-IOPS requirements.

• The JSON files contain one billion items, so this is a big-data workload.
• PySpark uses Apache Spark’s distributed, parallel processing, allowing the data to be processed across multiple compute nodes.
• It can read and transform data directly from OneLake, helping minimize unnecessary data movement or duplication.
• A Fabric notebook can also support exploration and visualization, as well as Spark-based analytics and anomaly-detection workflows.

• Pandas is primarily in-memory and generally suited to smaller datasets. One billion records would be impractical on a typical single machine.
• A Power BI report with core visuals is appropriate for visualization and sharing, but it is not the best tool for large-scale transformation, parallel processing, or anomaly detection. It would normally consume prepared data rather than perform the entire workload.

• Box 1: No — The rule requires user.department to equal Engineering. Engineer does not match, so User1 is not in AU1. Admin1 cannot reset User1’s password.
• Box 2: No — Admin1’s role is scoped to AU1 and cannot manage users outside that AU.
• Box 3: Yes — Admin2 is a Global Administrator and can reset User3’s password.

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• Response and resolution times
• Availability or uptime requirements
• Performance targets
• Support responsibilities
• Penalties or remedies if requirements aren’t met

• SOW (Statement of Work): Describes the work, deliverables, scope, and schedule for a project.
• MOA (Memorandum of Agreement): Documents agreed-upon responsibilities or cooperation between parties.
• MOU (Memorandum of Understanding): Records a general mutual understanding, often without detailed enforceable service targets.

1. Initiate — establish the project, scope, team, and governance.
2. Plan — develop the detailed plan, schedule, resources, and implementation approach.
3. Execute — configure, integrate, migrate, test, and prepare the solution.
4. Deploy — move the solution into production and support go-live.
5. Close — complete handover, confirm outcomes, and formally close the project.

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the primary control for switch-port MAC learning.
• NGFW: Protects at network boundaries but does not directly limit MAC addresses learned on access ports.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or exposure that creates the risk.

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????

• FTP — Transfers files using a client/server model and supports authentication. It uses separate control and data connections.
• TFTP — A very simple file-transfer protocol with no authentication and minimal features. Commonly used to transfer router or switch configuration files and IOS images.
• SCP — Securely copies files over SSH. It provides encryption and authentication.
• SFTP — Also transfers files securely through SSH, but provides more file-management capabilities than traditional SCP.
• HTTP/HTTPS — Primarily web protocols, but can also download files; HTTPS encrypts the session.

• TFTP = simple, unauthenticated file transfer
• FTP = file transfer with authentication, but not inherently encrypted
• SCP/SFTP = secure file transfer using SSH

• A. PsFile — Correct: Displays files opened remotely on a system. This reveals shared resources and user activity.
• B. UserInfo — Correct: Gathers information about user accounts, supporting account and privilege enumeration.
• C. PsPasswd — Answer key lists it: This is questionable. PsPasswd is primarily used to change passwords remotely, not enumerate information. The key may classify it broadly as a Windows account-management tool, but it is not a strong enumeration example.
• D. WinSSLMiM — Incorrect: Used for SSL man-in-the-middle activity, not enumeration.

• NTLM: Uses Windows challenge-response authentication and does not provide the normal web-based MFA redirect flow.
• Single Sign-On: Automatically reuses existing credentials; it is intended to avoid prompting, not to support an MFA workflow.
• Transparent: Intercepts the session without redirecting the user to a separate authentication page.

• A: Build a custom API — possible, but unnecessary as the primary solution and potentially more costly to develop and maintain.
• B: Use pre-built chatbots — these generally answer questions but may not support the required custom workflow and real-time actions.
• C: Fine-tune with sample data — improves model behavior but does not provide live database access.
• D: Google Cloud databases + Vertex AI — stores current inventory data and lets an AI agent retrieve it and take actions based on up-to-date information.

• The team should inspect its way of working during retrospectives.
• The team can identify root causes of delays and agree on process improvements.
• The leader facilitates the removal of impediments and provides support, but does not impose solutions.

• A: An impediment log can help track issues, but documentation alone does not resolve them.
• B: Directing the team toward solutions conflicts with agile empowerment and self-management.
• C: Adding impediments to the product backlog may incorrectly treat team problems as product features and delay resolution.

• Defender for Servers is the Defender for Cloud plan that protects Azure VMs and generates security alerts that can be reviewed in Defender for Cloud.
• Azure Diagnostics extension collects guest OS monitoring data, but it does not onboard VMs to Defender for Cloud or provide Defender security alerts.
• Data connectors are used for Sentinel integrations.
• Azure Storage Analytics and workflow automation do not provide VM protection.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.

• Use the grant-date fair value: $30
• Do not remeasure to the year-end value of $45
• Update the estimate of employees expected to vest

• Dr Share-based payment expense $450,000
• Cr Equity/share option reserve $450,000

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• UPS battery-backed outlets: Connect only essential devices needed during an outage:

• Surge-protector-only outlets: Connect nonessential devices, especially the printer. Printing does not need to continue while you are saving work and shutting down.
• UPS power source: Plug the UPS directly into a wall outlet.
• Surge protector power source: Plug it directly into a wall outlet as well. Do not normally plug a surge protector into the UPS, because that creates a daisy chain and can overload the UPS.

• Customize Opportunity Contact Role
• Add the Opportunity Contact Role related list to the Opportunity page layout

• File policy in Microsoft Defender for Cloud Apps: Can detect activity involving files, but it is not designed specifically to investigate risk from departing or deleted users.
• Access review policy in Microsoft Entra: Reviews whether users should retain access to resources; it does not detect historical document downloads.
• Alert policy in Microsoft Defender for Office 365: Primarily handles alerts for email and collaboration threats, not insider-risk investigations involving departed users.

Step 1: Calculate the rights issue price

Step 2: Calculate the number of new shares

Step 3: Calculate the value after the issue and project

• Rights issue proceeds: $21.6m
• Project NPV: $5m

Step 4: Calculate the theoretical ex-rights price

• A — Capacity: The system must handle all current records and anticipated future records. A system that cannot cope with volume will quickly become ineffective.
• C — Accuracy: Academic records are critical, so the new system must be at least as accurate as the existing system and comparable systems. Poor accuracy could cause serious administrative and reputational problems.
• D — Integration: Linking with the university’s financial systems supports consistency and avoids duplicate data entry, especially for registration, deregistration and fee-related transactions.

• B — Parallel running: This is a useful implementation and risk-control technique, but it is not an essential feature of the system itself. It may also be expensive and time-consuming.
• E — Internet access for all information: This creates significant confidentiality and security risks. External access might be needed for selected services, but unrestricted access to all information is not essential and would be inappropriate for student records.

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• A class/teacher fact should contain one row per Class ID. It can support the count of classes and contain attributes such as Teacher First Name and Period Number.
• An attendance fact should contain one row per attendance event, such as Class ID + student + date. It supports attendance counts by day and monthly averages.

• Teacher First Name ? Teacher fact
• Period Number ? Attendance fact

• Deploy five individual VMs: This does not create a VM scale set.
• Modify Availability Zones or Size settings: These actions do not create the required scale set and add unnecessary steps.
• VM orchestration mode: This is Flexible orchestration, intended for more individually managed VMs and mixed configurations. It is not the best choice for a straightforward group of identical instances.