Real Estate BCBA Exam Actual Questions
Board Certification in Business Valuation (BCBA) (Page 5 )

• Automation handles repetitive tasks, and orchestration coordinates responses across tools (SIEM, SOAR, EDR, etc.).
• This allows the security team to process more events with the same number of people, improving throughput and response times.
• Analysts can focus on more complex tasks like investigation and threat hunting instead of manual triage.

• It increases complexity: automation can reduce complexity when well-implemented; complexity is not the main intended benefit.
• It removes technical debt: automation/OR focuses on current incident response efficiency, not primarily on architectural debt.
• It adds additional guard rails: governance is important but not the core value of automation/orchestration within a SIEM.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• Enable the owner dimension

• Assign a standard costing inventory model

• Batch dimension tracks batches or lots, such as expiration or production batches. It does not identify inventory ownership.
• Moving average is a costing method, but it is not the required choice for this consignment configuration.

• Correct choices: A and D.

• Why not B, C, or E?

• Pay-as-you-go in Azure is an operating expense (OPEX) model, not an “elastic” expenditure model.
• Elastic or scalable terms describe capacity planning, not the cost category. The cost should be treated as OPEX since you pay for usage each month.
• The parallel question (Question 12) shows the correct approach is using an operational expenditure model.

• CAPWAP (Control And Provisioning of Wireless Access Points) creates a tunnel between the AP and the Wireless LAN Controller over the IP network. The AP and WLC communicate via this CAPWAP tunnel, which can traverse Layer 2 or Layer 3 networks.
• The AP does not have to be on the same switch as the WLC. It can connect to any switch in the network, as long as there is IP reachability between the AP and the WLC. This is why option D is correct.
• The other options are incorrect:

• It is a sequence of distinct phases that flow one after another (requirements ? design ? implementation ? verification ? maintenance).
• Requirements are defined up front and changes are costly; the project often requires formal sign-off before moving to the next phase.
• It emphasizes heavy documentation and minimal iteration after a phase is completed.

• IPv6 address types:

• The block FF00::/12 is a subset of the multicast space, so it represents multicast addresses.
• Therefore, this block forwards packets to a multicast address (to multiple receivers) rather than to a single unicast address.
• The other prefixes are unicast and would deliver to a single interface.

• Residual neural network (ResNet): Primarily used for computer vision tasks such as image classification.
• Support vector machine (SVM): Commonly used for classification and regression, not natural-language query generation.
• WaveNet: Designed mainly for generating or modeling audio and speech.

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

• administrators — Full access to switch configuration and REST API functions; excessive for this requirement.
• sysadmin — Intended for highly privileged system administration, not basic monitoring.
• helpdesk — More limited and focused on troubleshooting/support functions; it does not match the stated default role and level-1 requirement as directly.

• A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

• B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

• D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

• E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.
• F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

1. Ingestion Lambda receives requests from API Gateway and places messages in an SQS queue.
2. Processing Lambda is triggered by the queue and loads records into Aurora PostgreSQL.

• Decoupling: API request handling is separated from database loading.
• Buffering: SQS absorbs bursts when incoming traffic exceeds the database’s processing capacity.
• Controlled concurrency: Configure the SQS-triggered Lambda’s concurrency and batch size to avoid overwhelming Aurora or exhausting database connections.
• Automatic retries: Messages that fail processing can return to the queue and be retried. A dead-letter queue can capture persistent failures.
• Lower operational effort: The solution remains serverless and avoids managing EC2 servers or Kubernetes clusters.

• A: EC2 and Tomcat add server-management overhead.
• B: DynamoDB/DAX would require changing the database model and does not solve the Aurora ingestion design.
• C: SNS is useful for notifications and fanout, but SQS is better for durable buffering and backpressure in this producer-consumer workflow.

1. Create a new AMI or copy the existing AMI while specifying EBS encryption and an appropriate AWS KMS key.
2. This creates an encrypted AMI backed by encrypted EBS snapshots.
3. Copy the encrypted AMI to the destination Region, using a KMS key available there.
4. Launch the application stack from the encrypted AMI.

• B: AWS KMS does not encrypt an existing unencrypted AMI in place. You must create an encrypted copy.
• C: AWS Certificate Manager manages TLS certificates, not EBS or AMI encryption.
• D: Enabling encryption by default affects newly created EBS volumes and snapshots; it does not encrypt an existing unencrypted AMI during copying.

• The question asks why some tasks appear locked in the HR Guided Setup Module’s Task view.
• The options are:

• C) They require other tasks to be completed first. In guided setup flows, tasks are usually gated by prerequisites to ensure proper sequencing and data/configuration dependencies. You typically unlock a task only after the necessary preceding tasks are finished.

• A) Elevated roles can restrict access in some contexts, but guided setup tasks are commonly gated by prerequisites rather than solely by role.
• B) Deprecation isn’t the general pattern for “locked” tasks in the guided setup.
• D) A plugin activation could unlock certain features, but the common gating mechanism is task dependencies, not plugin state.

• The page shows the answer as D, but based on how HR Guided Setup usually works, the more accurate reason is typically C (prerequisites). If you’re studying, treat C as the conceptual answer and be aware the listed key may be incorrect. If you want, I can walk through each option in more detail.

• Correct answer: B — A reservation for the server based on the MAC address.

• Why this is the best choice:

• Why the other options are less suitable:

• Quick takeaway: Use a DHCP reservation to give the file server a fixed IP while still benefiting from centralized DHCP management.

• A — SCIM synchronizes changes to user attributes from the identity provider to GitHub.
• B — SCIM deactivates GitHub accounts when users are removed or deactivated in the identity provider.
• D — SCIM automates user provisioning when new users are added to the identity provider.

• C: SCIM does not delete organization repositories.
• E: SCIM does not generate REST API authentication tokens.
• F: SCIM handles identity lifecycle management, not repository permission configuration based on roles.

• In Azure, the typical cost approach for pay-as-you-go VMs is an Operational Expenditure (OPEX) model. You’re billed for actual usage each month.
• The term “elastic expenditure model” isn’t a standard Azure cost category. Elasticity describes scaling capacity, not the billing category itself.
• So recommending the elastic expenditure model is not correct for this goal.

• The solution does not meet the goal. Answer: No (B).

• Pay-as-you-go aligns with OPEX because costs vary with usage.
• Elasticity is about scaling resources, which affects performance and capacity, not the fundamental cost model.

• Goal: serving a static website globally with minimal latency.
• Why C works: CloudFront is a Content Delivery Network (CDN) that caches content at many edge locations around the world. When users request the site, CloudFront serves cached copies from the nearest edge location, greatly reducing latency. It also reduces load on your EC2 origin by handling many requests at the edge.
• Why the other options aren’t as good:

• A? ??? Aurora Replicas? ?? ??? ???? ?? ???, ?? ???? Network Load Balancer(NLB)? ??????. NLB? ?? 4 ?? ???? HTTP ??? ?? ???(Sticky sessions)? ????? ???? ????.
• ??? ?? ??????? ?? ?? ???? ??? ???? ?? ????? ????? ?? ?? ???(?? ?/??? ??)? ?????. ? ??? ALB?? ?? ????, NLB?? ???? ?????.
• ??? ??? ??? ??? ???? ?? ???? ???? HTTP ???? ??? ALB? ???? ???. A? ? ??? ??????.

• Correct answer: D. AWS CloudShell

• Why: AWS CloudShell is a browser-based shell that runs in the AWS Console and uses the current authenticated session. It provides a pre-authenticated, ready-to-use command-line environment directly from the Management Console, with AWS CLI and common tools installed.

• Why the other options aren’t correct:

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• IaaS provides virtualized infrastructure, including VMs, disks, and networking. You manage the guest operating system and software installed on the VM.
• PaaS provides a managed platform for deploying applications without managing the underlying VMs or operating systems. Examples include Azure App Service and Azure Functions.

• On-Demand: You pay by the hour with no long-term commitment. This is ideal for workloads that are infrequent or have highly variable usage. Since this job runs only 24 hours once per year, you pay only for those 24 hours, with no wasted upfront or long-term payments.
• Reserved Instances: Require a 1- or 3-year commitment and pay for capacity whether you use it or not. For a workload that runs just 24 hours a year, you’d be paying for most of the term unused, making it far less cost-efficient.
• Spot Instances: Can be interrupted whenever AWS needs capacity, which is unacceptable for an uninterruptible workload.
• Dedicated Instances: Generally more expensive and aimed at licensing or compliance requirements; not needed for this use case.

• A private IP address on the virtual network
• A public IP address associated with its IP configuration

• Context: You’ve enabled auditing in Dataverse and need to trim audit data to free storage. The question asks which deletion options you can use.

• What the options typically mean:

• About the provided answer (A, C, D): The list includes “by column,” which isn’t a typical or supported way to purge audit data. The more plausible trio is A (by record), B (date range), and C (by table older than date). If the exam expects A, C, D, that seems incorrect or mis-stated in the source.

• Practical takeaway: To reduce audit storage, use per-record deletions, per-table purge by date, and/or date-range deletions as supported by the environment’s audit management UI or admin docs.

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• Mapping:

• Why:

• Quick note: If you were to host a website on a VM, it would be IaaS; if you used a platform service instead of a VM, it would be PaaS. CaaS (containers) isn’t shown here.

• Answer: No.

• Why:

• If you need such an assessment while controlling costs, you’d generally pursue a paid MCS engagement or another option outside of the basic Premier entitlement.

• The correct permission is Manage Sandboxes (the official Salesforce name; the option in the list is written as “Manage Sandbox,” which is effectively the same idea but the canonical name uses the plural).
• Why: Sandboxes are a lifecycle feature. Only users with the explicit Manage Sandboxes permission can perform create, delete, refresh, or activate actions.
• Why the other options aren’t correct:

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• Answer: D. Select an IdP

• Why: To reduce the number of credentials across multiple SaaS apps, implement a single sign-on approach via an Identity Provider. The first step is choosing the IdP; once selected, you can enable SAML (A) or OAuth as supported by apps. Password vaulting (C) is not a true SSO solution, and B is not the foundational step.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Program and project management
• Risk management
• Cloud financial management
• Data governance
• Portfolio management

• Sustainability
• Performance efficiency
• Reliability

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Answer: No (B)

• SaaS (Software as a Service) delivers applications over the internet; you don’t manage the underlying infrastructure or OS.
• Deploying Azure virtual machines requires provisioning and managing virtual machines, OS, updates, and networking—this is classic IaaS (Infrastructure as a Service).
• PaaS is for managed runtime environments (apps hosted on a platform), not for VM deployment.

• Correct answer: A
• What this is saying: You need to write a Transact-SQL query that uses REGEXP_SUBSTR to extract the ID from MessageText, and you should apply STRING_ESCAPE(MessageText, 'json') before calling REGEXP_SUBSTR.

• MessageText may contain JSON characters (quotes, backslashes, etc.). Escaping the JSON content first ensures the string you pass to the regex is safe and won’t confuse the regex engine.
• The pattern you apply with REGEXP_SUBSTR would then extract the first substring that matches your ID pattern from the (escaped) text.

• Example (conceptual):

• The question implies REGEXP_SUBSTR is available in this environment; some SQL Server and Fabric contexts don’t expose it natively in all versions. If REGEXP_SUBSTR isn’t available, you’d need an alternative approach (e.g., using built-in regex-like capabilities or CLR/UDFs).
• If you need the ID specifically from the first paragraph, you might first isolate the first paragraph and then apply REGEXP_SUBSTR, or compose a single pattern that anchors to the first paragraph.

• Permanent table (E): Correct. A dropped permanent table can be restored with UNDROP TABLE during its Time Travel retention period. Permanent tables also have Fail-safe protection.
• Transient table: It can also generally be restored during its shorter Time Travel period, although it has no Fail-safe. Therefore, excluding it makes the question questionable.
• Temporary table: Usually cannot be recovered after it is dropped; its lifecycle is limited to the session.
• Materialized view (D): The answer key treats it as recoverable, but recovery behavior depends on the specific Snowflake object/version capabilities. It should not be confused with an ordinary view.

• runParallel is defined as async, so it returns a Promise.
• To use the result, you attach a then handler (or use await inside another async function).

• A: “Async runParallel() .then(data);” is invalid. “async” is a keyword for function declarations, not something you put in front of a call, and you’d need a function as the then-argument.
• B: “runParallel().done(function(data){return data;});” .done is not standard in native Promises (it exists in some libraries). Without a compatible library, this won’t work.
• C: “runParallel().then(data);” is invalid because then expects a function as its argument; data is not a function.
• D: “runParallel().then(function(data){ return data; });” is valid (or equivalently, runParallel().then(data => data);).

• The robust, standard option is D.
• B could work only with a library that provides .done; otherwise it’s not reliable.

• The answer: Question 51: C — Request trigger.

• To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.
• The other options aren’t appropriate:

• Create a Logic App with the Request trigger to generate a URL.
• Configure Application Insights to post the degraded-availability payload to that URL.
• Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

• What the goal is: You want to add guest (external) users to your Azure AD tenant contoso.com, one entry per external user in a CSV.

• The proposed solution uses New-AzureADUser for each external user. Why this isn’t correct: New-AzureADUser creates a regular (internal) user in your directory. It does not create a guest/B2B user invite. So you’d end up with 500 ordinary accounts, not guest accounts with external access.

• The correct approach: Use New-AzureADMSInvitation for each external user. This invites the external user to your directory and creates a guest user (a B2B collaboration user) in your tenant. The invited user then accepts the invitation and gains access as a guest.

• Azure AD vs directory/tenant: Azure AD is the cloud identity service. A directory (also called a tenant) is your specific instance of that service (contoso.com in your scenario). The terms are often used interchangeably in exams.
• Guest user vs internal user: A guest user is external to your organization; an internal user is created directly in your directory as a normal employee/user account.
• B2B invitation: The process of inviting external users so they can collaborate in your resources; New-AzureADMSInvitation is designed for this.

• Why: If an application on EC2 needs to call other AWS services, using an IAM role (attached to the EC2 instance as an instance profile) provides temporary, automatically rotated credentials. This avoids embedding access keys in the application.
• How it works: Create a role with the minimum required permissions, attach it to the EC2 instance, and let the AWS SDK used by the application retrieve credentials from the instance metadata service. The credentials rotate automatically and are scoped to the policy you define.
• Why not other options:

• B: Intégrez des résultats de due diligence tels que les évaluations de risque client.

• C: Utilisez des correspondants en aval pour enquêter et signaler les activités suspectes.

• Network Security Groups (NSGs) control network traffic to and from Azure resources.
• By applying NSGs to the web tier and the database tier (subnets or NICs), you can:

• NSGs provide the necessary granularity (source/destination, port, protocol) to enforce the desired traffic patterns between tiers.
• For easier management you can use separate subnets for each tier or, optionally, use Application Security Groups to simplify rule management.

• A. Extranet
• B. VLAN
• C. Intranet
• D. VPN

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• En Cisco SD-Access, el fabric overlay se extiende hasta lo inalámbrico; los APs son nodos de borde del fabric y su tráfico queda dentro del overlay.
• El cliente inalámbrico genera tráfico que viaja por el overlay, pero no es un componente del fabric en sí.
• El WLC es principalmente una herramienta de gestión y control, no forma parte del overlay; el underlay es el transporte físico.

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.