Salesforce ADX-201C Exam Prep
Administrative Essentials for New Admins in Lightning Experience + Certification (Page 3 )

• Actions that call external APIs
• Subflows
• Connection and credential aliases
• Supporting integration logic

• Action — A reusable operation within a flow, such as “Create a record” or “Send email.”
• Connection — Defines how ServiceNow authenticates and communicates with an external system.
• Integration step — A general flow step, not the name for the packaged integration.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• Third-party attestation: Provides independent confirmation, often for formal compliance reporting, but is not usually performed frequently.
• Penetration testing: Attempts to exploit vulnerabilities; it focuses on technical security, not overall compliance procedures.
• Vulnerability scans: Identify known technical weaknesses in systems, but do not evaluate whether policies and processes meet compliance requirements.

• When the MVP will be defined — the MVP should already be understood sufficiently when assessing the business case.
• What the MVP is — useful information, but not the key requirement tested here.
• That the MVP is the same as project viability — incorrect. The MVP helps test viability; it is not identical to viability itself.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

• Partners first log in to the corporate portal, which uses the shared SAML Identity Provider.
• When they select a Salesforce link, the IdP can send a SAML assertion directly to Salesforce.
• Salesforce validates the assertion and grants access to the Partner Community without requiring another login. This is IdP-initiated SSO because authentication begins outside Salesforce.

• SP-initiated SSO starts when Salesforce sends an authentication request to the IdP. That would be appropriate if users began by visiting Salesforce.
• The Web Server and User Agent OAuth flows are for OAuth authorization, not browser-based SAML federation between an IdP and Salesforce.

• Instant messaging/chat: Can be abused to send malicious links or attachments, but P2P file sharing is the more direct high-risk source.
• E-mail: A common malware delivery method, but this question specifically emphasizes an application type associated with direct file exchange.
• End-to-end applications: This describes communication protection or architecture, not a specific application category known for malware distribution.

• httprint fingerprints Web servers by analyzing their HTTP responses. It can help identify the Web server type and sometimes its version, even when the banner has been modified or hidden.
• Wget is mainly used to download files or Web content.
• WinSSLMiM is associated with SSL man-in-the-middle testing.
• Whisker is an older Web-server vulnerability assessment tool, especially associated with IIS, rather than the expected banner-grabbing tool here.

• The listener uses a virtual IP address shared by the availability-group replicas.
• Floating IP, also called Direct Server Return (DSR), allows the SQL Server nodes to respond using the listener’s IP address rather than their individual VM IP addresses.
• This is required for the availability-group listener to function correctly with an Azure internal load balancer.

• Use the grant-date fair value: $30
• Do not remeasure to the year-end value of $45
• Update the estimate of employees expected to vest

• Dr Share-based payment expense $450,000
• Cr Equity/share option reserve $450,000

• GPS coordinates
• Date and time the image was taken
• Camera or device model
• Exposure settings

• Log data: Records events or activities, such as system or application activity.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification for information requiring protection; geolocation may be sensitive, but the technical type stored in the image is metadata.

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• S3 Glacier Deep Archive is designed for long-term archival data with very infrequent access and has a lower storage cost than S3 One Zone-IA.
• The documents are copies stored elsewhere, so reduced availability and delayed retrieval are acceptable.
• An S3 interface VPC endpoint allows private access from the VPC without exposing the bucket through the public internet.
• A bucket policy can restrict access to requests coming through that endpoint.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best tool for scanning uploaded files.
• C. Load balancer: Improves availability and distributes traffic but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may inspect HTTP requests, but malware scanning of uploaded PDFs is the key requirement here.

• IKE (Internet Key Exchange) negotiates the IPsec security association, including:

• ESP (Encapsulating Security Payload) protects the data after negotiation by providing encryption and optionally authentication.
• AH provides authentication and integrity but does not encrypt traffic.
• TLS is used for protocols such as HTTPS, not for negotiating IPsec parameters.

• Run the backup with WITH CHECKSUM
• Store the backup on an SMB network share

sql 
BACKUP DATABASE DB1 
TO DISK = '\\FileServer\SqlBackups\DB1_full.bak' 
WITH CHECKSUM;

• DMS does not create the SQL Server backups for you.
• You must provide a valid full database backup.
• You must continue taking transaction log backups while the source database remains online.
• The full backup and subsequent log backups must be available in the SMB share that DMS can access.
• WITH CHECKSUM enables backup checksum validation, helping detect backup corruption.

• Case Assignment Rules normalmente são avaliadas quando o caso é criado. Elas podem ser executadas novamente em uma edição somente se o usuário marcar “Assign using active assignment rules”; isso não acontece automaticamente apenas porque o caso foi fechado.
• Portanto, criar uma regra de atribuição não corrige os centenas de casos já fechados e não garante, por si só, que um caso será transferido antes de ser fechado.

• B — Usar uma ferramenta de dados: corrige os registros históricos já existentes, atualizando o Owner.
• D — Criar uma regra de validação: impede que um caso seja fechado enquanto ainda pertence a uma fila. Exemplo conceitual: se Status = Closed e o proprietário for uma fila, bloquear o salvamento.

• Custom domains: Supported by Basic and higher tiers.
• Dedicated compute: Basic and Standard use dedicated virtual machine instances; Free and Shared use shared infrastructure.
• Load balancing between instances: Standard provides scaling across multiple instances with load balancing.
• Storage: Standard provides more storage than Basic.
• Cost: Standard is the least expensive option that satisfies all the stated requirements.

• Free/Shared: Use shared compute and have limited features; they don’t meet the dedicated-compute requirement.
• Basic: Provides dedicated compute and custom domains, but does not provide the required Standard-level multi-instance capabilities in the exam’s feature comparison.

• Business risks
• Potential financial, operational, legal, or reputational impact
• How governance reduces risk to organizational objectives
• How much risk the organization is willing to accept

• Existing Eventhouse data: remains available only in the KQL database.
• Data ingested after enabling the feature: is copied to OneLake and can be accessed through OneLake file explorer.
• New databases: are irrelevant; the setting applies to the selected KQL database.

• netstat -tuln can show listening TCP ports.
• If the web service is not listening, or is bound only to 127.0.0.1, remote browsers cannot connect even though the server responds to ping.

• traceroute: Tests the path to the server, but ping already confirms basic reachability.
• tcpdump: Useful for detailed packet analysis, but it is more appropriate after checking whether a service is listening.
• arp: Helps troubleshoot local IP-to-MAC resolution, not an application-layer web connection.

• Accept: Acknowledge the risk without taking additional action.
• Transfer: Shift the risk’s impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact, such as by implementing controls.
• Avoid: Eliminate the activity or situation that creates the risk.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• Creating and training machine-learning models
• Testing and evaluating models
• Deploying models as usable endpoints

• 50% memory utilization baseline: The environment can be provisioned with excess capacity, leaving room for growth and workload spikes.
• Storage scalability: Cloud storage can generally be expanded as needed without redesigning the physical platform.
• Single circuit failure resilience: A properly designed IaaS provider uses redundant power circuits and infrastructure, so failure of one circuit should not take the platform offline.

• A — Dual PDUs: Helps with power redundancy but does not provide storage scalability.
• C — Network load balancing: Provides network-path resilience, not memory or storage scalability, and does not address a power-circuit failure.
• D — Multiple NAS devices: May improve storage capacity, but does not inherently provide power resilience or the required compute-capacity baseline.

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• C — Create a form extension and implement validation

• D — Use Chain of Command (CoC) with a form extension class

• Customers may boycott V’s products.
• Supermarket customers may stop buying from V.
• Investors may view V as having higher legal, ethical and reputational risk.
• V could face fines, lawsuits, contract losses and higher costs.
• Expected future profits may fall.

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

Correct reasoning

• Create storage5 as a General-purpose v2 (StorageV2) account.
• Configure Blob object replication from storage5 to an existing compatible storage account.
• The destination must support object replication—typically another StorageV2 or premium block blob account.
• Blob versioning must be enabled on both accounts.
• Blob change feed must be enabled on the source account.
• The accounts must meet Azure’s object-replication requirements, including being in supported regions and having compatible configuration.

• A — Use a custom controller: An Apex class can contain the page’s logic.
• C — Use a standard controller with extensions: The standard controller provides basic CRUD behavior, while an extension adds custom logic.
• E — Use a standard controller: Useful when the page works mainly with one Salesforce object and needs standard functionality.

• A page with no controller for static or controller-free content.
• A custom controller with extensions; extensions are not limited only to standard controllers.

• Information sources: Collect security-related data, such as network packets, system logs, audit records, or application events.
• Analysis: Examines the collected data to identify suspicious activity, attacks, or policy violations.
• Response: Takes or recommends action, such as generating alerts, logging the event, or supporting a protective response.

• Products ? OrderHistory: Products is 1, OrderHistory is many (1:*)

• Date ? OrderHistory: Date is 1, OrderHistory is many (1:*)

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• Marketing users: Dynamic Forms can show all fields.
• Support users: Field visibility rules can display only the Support preference fields on the record page.
• Reporting: Both profiles can still report on all fields because Dynamic Forms controls page visibility, not the underlying field access.

• A — Two record types and page layouts: Page layouts can control field placement and editability, but they are less flexible for conditional field visibility and would not be the best fit here.
• C — Muting permission set: Permission-set muting is used with permission-set groups; it does not conditionally hide fields on a page.
• D — Field-Level Security: FLS would remove field visibility at the security level. If fields are hidden by FLS, users generally cannot report on or access those fields, conflicting with the requirement that both users report on all data.

• Standardize which services users can deploy
• Apply governance and access controls
• Manage approved product versions
• Give users self-service access to authorized resources

• AWS Control Tower: Sets up and governs a multi-account AWS environment.
• AWS Cloud Map: Provides service discovery for applications.
• AWS Clean Rooms: Enables privacy-preserving collaboration on data analysis.

• Firewalls and routers
• Servers and applications
• Endpoint devices
• Authentication systems
• Cloud services

• Centralized log collection
• Event correlation
• Dashboards and reporting
• Alerting
• Compliance support

• MFA: Protects sign-in and authentication.
• Azure Key Vault: Protects deployment secrets and credentials.
• Answer: No (B).

• Help the team identify the root causes of delays.
• Empower the team to improve its workflow and practices.
• Facilitate removal of impediments.
• Avoid directing the team toward a solution without its involvement.
• Protect quality and sustainable delivery rather than simply accelerating everything.

• A: An impediment log may help, but merely recording problems does not empower the team to solve them.
• B: Directing the team to solutions conflicts with self-management.
• C: Adding impediments to the product backlog may incorrectly treat internal obstacles as product features and delays their resolution.

• Honeypots: Decoy systems designed to attract attackers. Legitimate users should not access them, so activity there is a strong indication of unauthorized access.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal destination instead of the real attacker infrastructure. Security teams can then identify infected systems making those requests.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not detect intruders.
• CI/CD: Software development and deployment processes.
• Threat modeling: Identifies potential threats before or during system design, rather than detecting successful infiltration.
• Data obfuscation: Makes information harder to understand, but is not an attacker-detection mechanism.

• B — Sales staff will tender for riskier contracts:

• C — Sales staff will encroach on other territories:

• D — Sales staff will look for new jobs:

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• Sustainability
• Performance efficiency
• Reliability

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

• The Speech resource subscription key
• The Azure region
• Optional endpoint and speech settings

python 
speech_config = speechsdk.SpeechConfig( 
    subscription=key, 
    region=region 
)

• SpeechSynthesizer converts text to speech.
• It uses a SpeechConfig, but it does not configure the service connection itself.

• AudioConfig: Defines audio input or output sources.
• AudioOutputConfig: Defines where synthesized audio should be sent.
• SpeechConfig: Configures the Azure Speech service connection.

• Treatment one – easier to prepare: Convenience for the accounting team is not the main objective of financial reporting.
• Treatment two – fair representation: This is the correct choice because financial statements must faithfully represent the underlying transaction and its economic substance.
• Treatment three – maximises profit: Accounting policies must not be selected simply to manipulate or inflate reported profit.
• Treatment four – easier to understand: Understandability is important, but it cannot justify presenting information that is less faithfully represented.