Salesforce SHARING-AND-VISIBILITY-ARCHITECT Exam Prep
Salesforce Certified Sharing and Visibility Architect (Page 7 )

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• B. The community must be built with the Customer Account Portal template.

• C. An experience ID (expid) or placeholder parameter must be used in the URL.

• A: The Visualforce + Salesforce Tabs template does not provide this dynamic branding capability.
• D: An external CMS is not required. The branding configuration is handled within Salesforce Experience Cloud.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• Disable default accounts: Default or unused accounts may have predictable names or credentials and can be abused by attackers. They should be disabled, removed, or secured with strong credentials where necessary.
• Remove unnecessary services: Every running service can contain vulnerabilities or provide an entry point. Removing services the server does not need reduces exposure.

• Add the server to the asset inventory: Important for asset management, but it does not directly harden the system.
• Document default passwords: Default passwords should be changed or disabled—not recorded for continued use.
• Send logs to the SIEM: Supports monitoring and detection, rather than directly reducing the attack surface.
• Join the corporate domain: A deployment/configuration decision, not inherently a hardening measure.

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• Scheduling overlapping working hours for critical collaboration
• Assigning independent tasks that can proceed asynchronously
• Adding clear handoffs between offices
• Documenting decisions, questions, and required inputs
• Building appropriate time into the schedule for responses

• Manage multiple organizations from one hierarchy.
• Enterprise-wide policies, including repository visibility, forking, and GitHub Copilot policies.
• Centralized identity and access management, such as SAML SSO, SCIM provisioning, and—where applicable—Enterprise Managed Users.
• Centralized billing and licensing, including organization and Copilot seat management.
• Enterprise audit log, which aggregates activity across organizations.
• Security and compliance oversight, such as organization security visibility and enterprise-wide controls.
• Enterprise support and account management features, depending on the plan.

• Organization: manages its own repositories, teams, members, and local policies.
• Enterprise: governs multiple organizations and can enforce policies across them.

• The VPN gateway is in VirtualNetworkA.
• Gateway transit is configured on the peering associated with the VNet that contains the gateway—here, VirtualNetworkA.
• A peered VNet may use the remote gateway through the appropriate peering option, but this does not automatically update an existing P2S client’s routes.
• The Windows 10 workstation’s P2S VPN client package was created before VirtualNetworkB was peered, so it may not have a route for VirtualNetworkB.

• B. Data loss prevention (DLP): Helps prevent sensitive data from being copied, emailed, or exfiltrated. It is not the primary control for protecting a stolen laptop’s stored data.
• C. Operating system hardening: Reduces vulnerabilities by disabling unnecessary services and applying secure settings, but it does not necessarily protect the files if the disk is accessed directly.
• D. Boot security: Helps ensure the device starts only through trusted software or approved processes. It supports platform integrity but does not itself encrypt stored files.

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

bash 
docker run -it microsoft/azure-cli:0.10.17

• docker run starts an Azure CLI container; it does not automatically connect to the AKS cluster.
• The command does not run kubectl apply.
• The container would need the appropriate Kubernetes tools and AKS credentials.
• The device or container must obtain cluster credentials, typically using an AKS credential command, before running Kubernetes commands.

bash 
az aks get-credentials --resource-group <resource-group> --name <aks-cluster> 
kubectl apply -f myapp.yaml

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be:

• Planning — identify the need, objectives, resources and feasibility.
• Analysis — determine user requirements and examine the existing system.
• Design — specify how the new system will work.
• Implementation — build, test, install and introduce the system.
• Maintenance/evaluation — monitor and improve the system after implementation.

• principal represents the source or initiating system.
• principal.port is the source port.
• target represents the destination system.
• target.port is the destination port.

text 
principal.port = 5555

• network.ApplicationProtocol = HTTP identifies HTTP traffic but not the backdoor specifically.
• target.port = 5555 finds traffic going to port 5555, rather than originating from it.
• network.ip_protocol = TCP is too broad because many services use TCP.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• B — Reviewing the strategy: Usually performed by a security steering committee or other governance body.
• C — Communicating the strategy: The security manager may help communicate it, but communication is not the primary governance responsibility tested here.
• D — Approving the strategy: Approval belongs to executive management or the appropriate governing authority, not the person who develops it.

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

sql 
GRANT ALTER ON SCHEMA::schemaA TO User1;

• TRUNCATE TABLE is a DDL operation, not a normal DELETE.
• Having DELETE permission on a table is not sufficient to truncate it.
• The minimum relevant permission is ALTER on the table.
• Granting ALTER on SCHEMA::schemaA allows the user to truncate tables within schemaA.
• It does not grant equivalent permissions on schemaB or schemaC, satisfying least privilege.

• Azure creates a corresponding service principal in Microsoft Entra ID.
• The identity’s lifecycle is tied to the Azure resource.
• If the resource is deleted, Azure automatically deletes the identity.
• Only the associated resource can use that identity to request tokens.
• You can grant the identity permissions to access services such as Key Vault or Storage without storing credentials in code.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

• Gaia Portal: Controlled by Gaia administration settings, not SmartConsole Trusted Clients.
• SSH: Controlled by Gaia or operating-system SSH access settings.
• Security Gateway(s): SmartConsole connects to the Security Management Server, not directly to gateways for this purpose.

• VM CPU, memory, disk, and network usage
• Storage transactions and latency
• App Service response time
• Database DTU or CPU utilization

• Azure Traffic Analytics analyzes network traffic flows and security patterns; it is not the general infrastructure metrics tool.
• Azure Activity Log records subscription-level control-plane operations, such as resource creation, deletion, or configuration changes.
• Azure Advisor provides recommendations about cost, security, reliability, performance, and operational excellence, but it is not the primary tool for investigating live metrics.

• Which Security policy matches
• Which NAT rule/translation is selected
• Which PBF rule applies
• Which route is used

text 
test security-policy-match ... 
test nat-policy-match ... 
test pbf-policy-match ... 
test routing fib-lookup ...

• Creating and managing users and roles
• Granting and revoking roles and privileges
• Managing access-control responsibilities

• SYSADMIN: Manages warehouses, databases, schemas, and other objects—not primarily users and roles.
• PUBLIC: Automatically granted to every user; it is not an administrative role.
• ACCOUNTADMIN: Has the highest level of access, but should be reserved for account-level administration and emergencies rather than routine security tasks.

text 
ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global 
ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 global 
ip route 192.168.1.0 255.255.255.0 Vlan10 
ip route 172.16.1.0 255.255.255.0 Vlan20

• The route in Customer1 VRF provides a path back to the Customer2 subnet, 172.16.1.0/24.
• The route in Customer2 VRF provides a path to the FTP server, 192.168.1.200.
• The keyword global tells the router to resolve the next hop using the global routing table, enabling controlled route leaking between the VRF and global table.
• The global routes identify the VLAN interfaces used to reach each customer network.

• Create a record-triggered Flow on Opportunity.
• Run it when the record is created or updated.
• Add entry criteria such as Probability > 50%.
• Use Create Records to create the related Sales Demo Request, populating its Opportunity lookup.

• Apex Trigger: Possible, but unnecessary custom code for a straightforward automation requirement.
• Workflow Rule: Cannot create a related custom record.
• Process Builder: Could create a record, but Flow is Salesforce’s preferred and more capable declarative automation tool.

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

1. Product + ProductSubCategory: Inner join

1. Result + ProductCategory: Left outer join

• Discovers sensitive data in Amazon S3 buckets
• Uses machine learning and pattern matching to identify data such as personally identifiable information (PII)
• Helps assess S3 security and privacy risks
• Generates findings for potentially sensitive or exposed data

• Amazon Detective: Investigates security findings and performs root-cause analysis.
• Amazon GuardDuty: Detects threats and suspicious activity across AWS accounts and workloads.
• AWS IAM Access Analyzer: Identifies resources that are accessible from outside their intended trust zone, such as publicly accessible S3 buckets.

1. Ensure BOMs can include subcomponents ? Configure an entity relationship

1. Report changes made by engineers ? Enable auditing

• Configure entity relationship
• Configure auditing

• A — Correct: Flow Builder is declarative and visual, so administrators and other non-developers can participate in designing and improving business processes without writing Apex.
• D — Correct: Flow Builder provides visual debugging tools, allowing an admin to test paths, inspect variable values, and identify where a specific business case fails.
• E — Correct: A flow’s visual structure documents the logic and makes later maintenance easier than reading and updating custom Apex code.

• B — Incorrect: Flow debugging does not attach a debugger to live customer sessions. The admin uses Flow Builder’s debug functionality with test inputs; this is not live-session debugging and should not be used to monitor real customer transactions.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• Prevent connections to malware command-and-control servers
• Identify infected systems making those DNS requests
• Collect information for incident response

• A: Attackers do not normally use sinkholes to map a company’s domain structure.
• B: Redirecting employees from legitimate sites to attacker-owned sites describes malicious DNS manipulation, not a defensive sinkhole.
• D: Attracting attackers away from real resources is more closely associated with a honeypot or deception system.

• Continuous deployment: Automates software releases; it does not specifically test input handling.
• Static code analysis: Examines source or compiled code without executing it. It can find coding flaws but does not directly stress the application with malformed inputs.
• Manual peer review: Developers inspect code or design manually. Useful, but not the best practice specifically for testing how a live product handles invalid input.

• A laptop
• Software access
• A password reset
• A mobile phone

• They run behind the scenes — applies more to automation or workflows.
• They are optional — catalog items are fundamental to a request-based catalog.
• They provide options — variables and variable options collect the requester’s choices for an item; they are not the catalog item itself.

• B — AWS DataSync: Transfers data between storage systems, such as S3, file systems, and on-premises storage. It is not a marketplace or catalog for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit is a source-code repository, not a third-party data provider. Kinesis is for streaming data ingestion.
• D — Kinesis Data Streams and ECR: ECR stores container images, not datasets. Kinesis does not provide access to ECR data as an external dataset source.

• Import — Loads data into Power BI. It requires a refresh, so it may not reflect changes within two minutes unless refresh is configured appropriately.
• Live connection — Connects to an existing Power BI semantic model or Analysis Services model; it is not the normal choice for connecting directly to an Azure SQL database.

• A. Microsoft 365 group with Assigned membership
• C. Microsoft 365 group with Dynamic User membership

Why?

• Assigned membership: You explicitly add User1, User2, and User3.
• Dynamic User membership: Membership is automatically determined by a rule based on user attributes.

Why the other options are incorrect

• B and D: Security groups do not support the Microsoft 365 group expiration policy.
• E: Dynamic Device groups are intended for devices, not these users, and are also security groups.

• Planning and designing products and services
• Developing and delivering them
• Managing risks, suppliers, and resources
• Measuring performance
• Continually improving value delivery

• Value stream steps describe activities used to create and deliver value; they do not themselves provide the broader capabilities.
• Vision and operating model provide direction and structure, but they are not the practical management capabilities that enable the work.
• Value chain is the operating model showing how activities combine to create value; it is enabled by practices and resources.

1. Modify the database subnet NACL inbound rules to allow traffic from the new web subnet’s CIDR block on the MySQL port (3306).
2. Modify the database subnet NACL outbound rules to allow return traffic to the new web subnet’s CIDR block on the required ephemeral port range.

• Multiple nodes: Data is replicated several times in the primary region.
• Separate geography: A copy is asynchronously replicated to a secondary Azure region.
• Readable secondary: RA-GRS provides read-only access to the secondary replica, even when the primary region is available.

• GRS: Replicates to another region but the secondary copy isn’t normally readable.
• ZRS: Replicates across availability zones in the same region, not a separate geographic region.
• LRS: Keeps replicas within a single datacenter or region and provides no geographic redundancy.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio and program management
• Risk management
• Data governance
• Compliance and oversight

• Azure Machine Learning is the overall Azure service.
• Machine Learning designer is the visual, drag-and-drop interface within Azure Machine Learning.
• Microsoft may refer to the broader product as Azure Machine Learning studio, while “Designer” remains the specific visual workflow tool.

• Azure Logic Apps: Workflow and integration automation.
• Azure Batch: Large-scale parallel or batch compute.
• Azure Cosmos DB: Globally distributed NoSQL database.