Test Prep ASVAB Section 5: Electronic Information Exam Prep
ASVAB Section Five : Electronic Information (Page 14 )

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• Type 1 hypervisor: Runs directly on the physical hardware (“bare metal”).
• Type 2 hypervisor: Runs inside the host OS as an application.

• Bare-metal installation: Type 1
• Local management only: Not a defining characteristic
• Specific hardware requirements: Not the key distinction

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• Training data for potential bias before model training
• Trained models for bias in predictions
• Model features to help explain how they influence predictions

• A: RAG workflows are typically built using services such as Amazon Bedrock, knowledge bases, and data sources.
• B: Monitoring model quality in production is primarily associated with SageMaker Model Monitor.
• C: Documenting model details is handled by capabilities such as SageMaker Model Cards.

• The load balancer provides the listener’s frontend IP address.
• The active SQL Server node must also respond to that same listener IP.
• Enabling Floating IP allows the listener IP to be preserved and handled correctly by the active replica.
• Without it, SQL connections may be sent to a node that cannot correctly claim the listener address.

• A health probe for the SQL Server port
• A load-balancing rule using the listener port
• Floating IP enabled on that rule

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

• Preparing and managing datasets
• Building and training machine-learning models
• Testing and evaluating models
• Deploying models as endpoints for predictions

• User1 (user1@contoso.com) — This is an external guest in the Fabrikam tenant. Assuming the guest uses email one-time passcode authentication, Azure AD emails a passcode to user1@contoso.com.
• User2 (user2@outlook.com) — An Outlook.com address can authenticate with a Microsoft account, so Azure AD uses that account’s authentication rather than sending an email OTP. The fact that User2 has never accessed Fabrikam resources does not by itself trigger OTP.
• User3 (user3@fabrikam.com) — This is an internal Fabrikam user, so the user signs in with the organization’s normal credentials and does not receive a guest OTP.

• A: Describes an update-set conflict, not a Dictionary Override.
• B: Describes a configuration item or change concept.
• C: Describes an approval or workflow activity.

• One network address
• Two usable host addresses—one for each router
• One broadcast address

• Router A: 10.2.1.1
• Router B: 10.2.1.2

• Design Studio > Emails ? create an email-template folder
• Design Studio > Landing Pages ? create a landing-page-template folder
• Add the relevant assets to each folder
• Right-click the folder and choose Share Folder
• Select the destination workspaces

• Help the team identify the root causes of delays.
• Empower the team to improve its workflow and practices.
• Facilitate removal of impediments.
• Avoid directing the team toward a solution without its involvement.
• Protect quality and sustainable delivery rather than simply accelerating everything.

• A: An impediment log may help, but merely recording problems does not empower the team to solve them.
• B: Directing the team to solutions conflicts with self-management.
• C: Adding impediments to the product backlog may incorrectly treat internal obstacles as product features and delays their resolution.

• Proxy server: Acts as an intermediary for requests, but does not necessarily provide an encrypted connection to the corporate network.
• NGFW: A firewall with advanced inspection and filtering capabilities; it may support VPNs but is not the remote-access solution itself.
• Security zone: A logical network grouping based on trust or security requirements, not a method for remote access.

• COE: Identifies the Center of Excellence, such as Payroll or Benefits.
• Topic Detail: Classifies the HR service within its COE; it does not identify the catalog item.
• Template: Supplies default values or case configuration.
• Record Producer: Represents the catalog item that employees use to submit the request and create the case.

• To identify the number of errors: select Column quality. It shows the percentage and count of Valid, Error, and Empty values for each column.
• To resolve errors: use the appropriate error transformation:

• Constrained VMs: VMs whose workloads are experiencing resource pressure, such as insufficient CPU or memory. They may need additional resources or optimization.
• Overprovisioned VMs: VMs allocated more CPU, memory, or storage than their workloads require. Their resources may be reclaimed or reduced.

• Underprovisioned VMs: This is not the predefined view identified for this report question.
• Zombie VMs: These are typically inactive or unused VMs and are useful for cleanup, but they are not the two views specifically intended here to identify inefficient resource allocation.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.

• Tokens: Individual units of text processed by a model, such as words, subwords, or characters.
• Models: Systems that learn patterns and generate predictions or outputs.
• Binaries: Data represented using the binary number system, not semantic representations.

• Due diligence: Investigating and evaluating a third party before entering a business relationship.
• Attestation: An independent auditor’s examination and formal report—such as the SOC 2 report itself. The analyst is reviewing the attestation, not performing it.
• Internal audit: Examines the organization’s own processes and controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity there is a strong indicator of compromise.
• DNS sinkholes: Redirect malicious or suspicious DNS requests to a controlled destination. This can identify infected systems attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it is not an attacker-detection method.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies potential threats and weaknesses before or during system design; it does not directly detect an active infiltrator.
• Data obfuscation: Makes information harder to understand, but does not identify attackers.

• Defender for Servers is the Defender for Cloud plan that protects Azure VMs and generates security alerts that can be reviewed in Defender for Cloud.
• Azure Diagnostics extension collects guest OS monitoring data, but it does not onboard VMs to Defender for Cloud or provide Defender security alerts.
• Data connectors are used for Sentinel integrations.
• Azure Storage Analytics and workflow automation do not provide VM protection.

xml 
<apex:page> 
    <apex:stylesheet value="{!URLFOR($Resource.MyStyles, 'styles/main.css')}" /> 
</apex:page>

• <apex:includeScript> is for JavaScript.
• <apex:includeStyle> is not a valid Visualforce component.
• <apex:require> is not the Visualforce tag used to load CSS.

• Regression predicts continuous numeric outcomes, such as house price, temperature, or sales amount.
• Linear regression assumes the target can be estimated from a linear relationship between the input features and the target.
• In Azure Machine Learning, you use a labeled dataset containing:

• Classification predicts a category or class, such as “spam” or “not spam.”
• Clustering groups similar records without a known label; it is an unsupervised learning technique.

• B: Prompt caching reduces cost and latency for repeated content, but cached content still occupies the context window. It does not solve context accumulation.
• C: Switching to a smaller model changes model capacity but does not address the growing context or remove irrelevant data.
• D: Keeping everything indefinitely increases token usage, risks context-window limits, and can distract the model with outdated information.

• Third-party attestation: Provides independent validation, but is typically periodic and performed by an external party.
• Penetration testing: Simulates attacks to identify exploitable vulnerabilities; it does not primarily track compliance.
• Vulnerability scans: Identify technical weaknesses, but do not provide a detailed review of procedures or compliance activities.

1. Append Table1 and Table2 as a new query

1. Select the product column in the appended query.

1. Choose Remove Rows > Remove Duplicates

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• B: Extending credit to customers increases receivables, so more cash is tied up in working capital.
• C: Replacing obsolete inventory does not reduce the overall inventory investment; it simply changes its composition.
• D: Paying suppliers earlier reduces payables. This uses cash and therefore increases the funds tied up in working capital.

• Insert is used when you are creating a new record. It saves the record to the table and then leaves the form.
• Update is used when editing an existing record. It saves the modifications and then leaves the form.

• Complete MFA, or
• Securely change their password

• Identity Protection: evaluates user and sign-in risk and can trigger remediation.
• Privileged Identity Management (PIM): manages temporary, just-in-time access to privileged roles; it does not automatically require password changes for risky sign-ins.

• transform() — modifies every element in an array
• filter() — keeps elements matching a condition
• exists() — checks whether any element matches
• aggregate() — reduces array elements to one result

sql 
SELECT transform(scores, x -> x * 2) 
FROM student_scores;

• A is incorrect because higher-order functions are mainly useful for nested or complex data.
• B is incorrect because they do not convert logic into Python.
• D is incorrect because their purpose is not to fix slow built-in functions, but to process arrays or maps with custom logic.

• RTO is how quickly service must be restored.
• RPO is how much data loss is acceptable.

• Snapshots: Restore points may be older and require restoration time.
• On-site backups: Usually require rebuilding or restoring systems, producing higher RTO/RPO.
• Journaling: Records database changes and can reduce data loss, but it still generally requires recovery or replay operations; it does not by itself provide the fastest service restoration.
• Hot site: Designed for rapid failover and minimal data loss.

• Warehouse size: Larger warehouses use more credits per unit of time than smaller ones.
• Number of clusters: A multi-cluster warehouse can run multiple clusters, and each active cluster consumes credits. Therefore, increasing the maximum or active cluster count can increase consumption.

• Number of users: More users may cause more workload, but users themselves do not consume credits.
• Amount of data processed: Snowflake warehouses are not charged directly by the amount of data scanned. However, processing more data may cause the warehouse to run longer, indirectly increasing credits.

• A. PsFile — Correct: Displays files opened remotely on a system. This reveals shared resources and user activity.
• B. UserInfo — Correct: Gathers information about user accounts, supporting account and privilege enumeration.
• C. PsPasswd — Answer key lists it: This is questionable. PsPasswd is primarily used to change passwords remotely, not enumerate information. The key may classify it broadly as a Windows account-management tool, but it is not a strong enumeration example.
• D. WinSSLMiM — Incorrect: Used for SSL man-in-the-middle activity, not enumeration.

• Identifies which user or department owns the device
• Supports inventory and compliance requirements
• Enables tracking of lost, stolen, retired, or unauthorized devices
• Helps enforce security controls such as mobile-device management and secure configuration

• The application stores data on Amazon EBS volumes, so the encryption should be applied directly to those volumes.
• EBS encryption uses AWS-managed cryptographic operations and is designed to provide encryption at rest with minimal performance impact.
• The volumes are created during initial deployment, so they can be configured as encrypted when provisioned.

• B: Moving data to an encrypted S3 bucket changes the storage design and does not encrypt the EBS data the application uses.
• C: A custom encryption algorithm adds application overhead and is unnecessary.
• D: Ephemeral disks are temporary storage and can lose data when instances stop or terminate. Encrypting only the AMI’s root volume does not protect data stored elsewhere.

• Dark web: A place where leaked credentials may be sold or shared, not usually the original source.
• Threat feeds: Collections of intelligence about threats, not a typical leakage source.
• State actors: A type of attacker, not an accidental corporate disclosure source.
• Vulnerability databases: Track known vulnerabilities, rather than leaked credentials.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• Physical: Protects facilities or equipment, such as locks and security cameras.
• Technical: Uses technology, such as firewalls, encryption, or access controls.
• Operational: Covers day-to-day actions and processes, such as training, backups, or incident response.
• Managerial: Includes policies, standards, risk assessments, and procedures.

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• Match found: ServiceNow updates the existing target record.
• No match found: ServiceNow normally creates a new target record.
• No Transform Map is created or deleted based on whether a match is found.

• File policy in Microsoft Defender for Cloud Apps: Can detect activity involving files, but it is not designed specifically to investigate risk from departing or deleted users.
• Access review policy in Microsoft Entra: Reviews whether users should retain access to resources; it does not detect historical document downloads.
• Alert policy in Microsoft Defender for Office 365: Primarily handles alerts for email and collaboration threats, not insider-risk investigations involving departed users.

• Create procurement-manager-role only in the shared services accounts, where procurement managers operate.
• Attach AWSPrivateMarketplaceAdminFullAccess to that role.
• Procurement managers assume the role when they need to administer Private Marketplace.
• Apply a root-level SCP that explicitly denies Private Marketplace administration to everyone except that role. The SCP acts as a maximum-permission boundary across member accounts.
• Add another SCP denying creation of a role with the same name. Otherwise, another administrator might create a similarly named role and bypass the intended exception.

• Creating the role in every account increases administration and creates more opportunities for misuse.
• A permissions boundary on developer roles does not prevent other administrators from managing Private Marketplace.
• Applying the SCP only to shared services accounts would not protect the rest of the organization.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.