Test Prep ASVAB Section 9: Assembling Objects Exam Prep
ASVAB Section Nine : Assembling Objects (Page 8 )

• Record changes — a flow can start when a record is updated or otherwise changes.
• Schedules — a flow can run at a specified date/time or on a schedule.
• Record inserts — a flow can start when a new record is created.

• Subflows are reusable flow components called by another flow; they are not normally trigger types.
• Record views do not generally initiate a Flow Designer flow.

• Unsafe images: Requires image/content moderation before the image is processed.
• Hidden instructions embedded in images: These are indirect prompt injections contained in untrusted image content or extracted text, not necessarily in the user’s typed prompt.

• Self-signed certificate — Causes a certificate trust warning, not incorrect name resolution.
• Nameserver record — A DNS record problem would usually affect multiple users, unless only this computer uses a different DNS server.
• IP helper — Relays certain network services, commonly DHCP, between subnets; it does not normally determine website name resolution.

• Identifies which user or department owns the device
• Supports inventory and compliance requirements
• Enables tracking of lost, stolen, retired, or unauthorized devices
• Helps enforce security controls such as mobile-device management and secure configuration

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Dark web: A place where leaked credentials may be sold or shared, not usually the original source.
• Threat feeds: Collections of intelligence about threats, not a typical leakage source.
• State actors: A type of attacker, not an accidental corporate disclosure source.
• Vulnerability databases: Track known vulnerabilities, rather than leaked credentials.

• CSIRT: A Computer Security Incident Response Team that handles and coordinates incident response.
• CVSS: A scoring system used to rate the severity of vulnerabilities.
• SOAR: Security Orchestration, Automation, and Response technology used to automate security workflows.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Leaf switches provide access ports for servers, users, and other devices.
• Spine switches provide the backbone between leaf switches.
• Every leaf switch connects to every spine switch, creating a predictable, full-mesh fabric between the two layers.
• Leaf switches do not connect directly to other leaf switches, and spine switches do not connect directly to other spine switches.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: It focuses on uplink speed, not the scalable topology.
• D: A single spine connection creates a bottleneck and a single point of failure.

• Deficiency found before patient use: usually does not require an adverse-event report because no patient exposure occurred.
• Event caused solely by the patient’s condition: may not be reportable if the device did not contribute.
• Malfunction protection operated correctly: generally exempt when the device’s safety mechanism worked as intended and prevented harm.

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.

• Scale out during the hours when customer traffic is high.
• Scale in during low-demand periods, reducing instance-hours and cost.
• Use scaling policies based on metrics such as CPU utilization or request count.

• Multiple Availability Zones: Improves availability and fault tolerance, but does not automatically reduce cost.
• Placement group: Helps with specialized performance or low-latency requirements, not cost optimization.
• Private subnets: Improve network security, but do not automatically adjust capacity or reduce EC2 usage costs.

• Tokens: Individual units of text processed by a model, such as words, subwords, or characters.
• Models: Systems that learn patterns and generate predictions or outputs.
• Binaries: Data represented using the binary number system, not semantic representations.

• Vulnerability scanner: Identifies technical weaknesses in systems, applications, or devices.
• Penetration test: Simulates attacks to determine whether vulnerabilities can be exploited.
• SCAP (Security Content Automation Protocol): Uses standardized formats and protocols for automated vulnerability, configuration, and compliance checks.
• Illumination tool: Maps and analyzes broader supply-chain exposure and third-party risk.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• Preparing and managing datasets
• Building and training machine-learning models
• Testing and evaluating models
• Deploying models as endpoints for predictions

• A. Continue using the current system: It will eventually fail and offers no recovery strategy.
• B. Virtualize the entire system: Correct. A VM can preserve the old OS, application, settings, and dependencies while running on newer physical hardware.
• C. Containerize the application: Containers generally share the host OS kernel and are not suitable for preserving an entire incompatible legacy OS.
• D. Clone the disks to USB: A disk clone may provide backup or temporary recovery, but it does not solve hardware compatibility or provide a reliable long-term platform.

1. Clear principles and boundaries — Employees have freedom, but decisions must remain within clear organizational values, policies and limits.
2. High degree of freedom — Managers are trusted to make decisions rather than seeking continual approval from senior management.
3. Frontline customer responsibility — Customer-facing managers should be empowered to manage customer relationships and respond quickly to needs.
4. Transparent and ethical information — Information should be openly available and used honestly, supporting trust and informed decision-making.

• httprint fingerprints Web servers by analyzing their HTTP responses. It can help identify the Web server type and sometimes its version, even when the banner has been modified or hidden.
• Wget is mainly used to download files or Web content.
• WinSSLMiM is associated with SSL man-in-the-middle testing.
• Whisker is an older Web-server vulnerability assessment tool, especially associated with IIS, rather than the expected banner-grabbing tool here.

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• Form layout
• Related lists
• Dictionary settings
• UI policies
• Client scripts
• Views and field visibility

• Personalization usually affects only the individual user.
• System configuration can affect other users, depending on its scope and conditions.

• Data Cloud combines data from multiple systems.
• It resolves and organizes that data into a unified customer view.
• That unified view enables downstream actions such as personalized campaigns, segmentation, analytics, and activation.

• A = core platform value
• D = a resulting business use case or benefit

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• MFA adds an additional authentication factor, such as a phone notification or verification code.
• It helps prevent unauthorized sign-ins, even if a password is compromised.
• It does not encrypt, store, or protect credentials used by deployment processes.

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• Red team: Offensive security; attempts exploitation and simulates attackers.
• Blue team: Defensive security; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve defenses, but is not the best direct answer here.
• White team: Usually oversees or coordinates an exercise, including rules of engagement and scope.

• Data owners: Decide who should have access and approve the access rules.
• Business process owners: May help define business requirements, but normally do not enforce technical permissions.
• Security steering committee: Provides governance and direction; it does not manage individual access rights.
• Security administrators: Apply and enforce the approved access controls.

Correct sequence

1. Merge Sales_Region with Sales_Manager using an inner join

1. Merge Region_Manager with Manager using an inner join

1. Merge Sales_Region and Region_Manager using a right join as a new query

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• Insert is used when you are creating a new record. It saves the record to the table and then leaves the form.
• Update is used when editing an existing record. It saves the modifications and then leaves the form.

• Domínios personalizados.
• Armazenamento suficiente.
• Instâncias dedicadas.
• Balanceamento de carga.
• Menor custo entre os planos que atendem a tudo.

• User-generated content: precisa ser coletado, filtrado, anonimizado e rotulado.
• Moderation logs: podem conter dados inconsistentes, informações pessoais e decisões que precisam ser revisadas.
• Content moderation guidelines: são regras ou orientações, não dados diretamente utilizáveis para medir o comportamento do modelo.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or methods used to access organizational resources.

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.

• Technical platform interfaces: Important for integration and interoperability, but they should support—not drive—the architecture.
• Scalability of the network: Valuable as the organization grows, but a scalable solution is ineffective if it does not meet business or security needs.
• Development methodologies: Relevant to implementation, but they do not define the organization’s fundamental security requirements.

• COE: Identifies the Center of Excellence, such as Payroll or Benefits.
• Topic Detail: Classifies the HR service within its COE; it does not identify the catalog item.
• Template: Supplies default values or case configuration.
• Record Producer: Represents the catalog item that employees use to submit the request and create the case.

• Feedback form: Captures opinions, not necessarily actual behavior; users may not respond.
• Questionnaire: Relies on memory and subjective judgments about usefulness.
• Interviews: Can provide valuable qualitative insights, but a sample of users may not represent overall usage accurately.

• # Development
• # Testing
• # Production

• Separate endpoints: relate to compute or connectivity, not dashboard labels.
• Separate queries: retrieve or transform data but do not designate visual sections.
• Direct text written into the dashboard in editing mode: dashboards use text boxes, typically with Markdown formatting, rather than arbitrary text placed directly on the canvas.

• Liability accounts (2000–2999) would incorrectly require dimensions, although they should have none.
• Expense accounts (6000–6998) would incorrectly require Customer, which should be optional.
• Account 6999 needs a separate rule because it requires all four dimensions, including Customer.

• 2000–2999: no dimensions
• 4000–4999: Department and Division required; Project and Customer optional
• 6000–6998: Department, Division, and Project required; Customer optional
• 6999: Department, Division, Project, and Customer required

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

• Allow only approved MAC addresses
• Limit the number of learned addresses
• Shut down or restrict a port when a violation occurs

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the direct control for limiting MAC addresses on switch ports.
• NGFW: Filters routed network traffic, while this attack targets Layer 2 switch behavior.

• Amazon SageMaker — charges apply for compute, storage, and other resources used.
• AWS Config — generally charges for configuration recording and rule evaluations.
• Amazon CloudWatch — has a limited free tier, but many metrics, logs, alarms, and API usage can incur charges.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

• C — Some risks cannot be eliminated.

• D — Accepting residual risk does not imply recklessness.

• E — Most companies in this industry will say something similar.

1. Initiate — establish the project, scope, team, and governance.
2. Plan — develop the detailed plan, schedule, resources, and implementation approach.
3. Execute — configure, integrate, migrate, test, and prepare the solution.
4. Deploy — move the solution into production and support go-live.
5. Close — complete handover, confirm outcomes, and formally close the project.