Test Prep ASVAB Test Exam Prep
Armed Services Vocational Aptitude Battery Test: General Science, Arithmetic Reasoning, Word Knowledge, Paragraph Comprehension, Mathematics Knowledge, Electronics Information, Automotive & Shop Information, Mechanical Comprehension, Assembling Objects (Page 84 )

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

• A limited lifetime
• Permissions defined by an IAM role or policy
• The ability to access AWS APIs without using long-term IAM user credentials

• Amazon API Gateway — Builds and manages APIs; it does not generally issue AWS credentials for applications.
• IAM users — Usually use long-term credentials, which are less suitable for applications.
• IAM instance profiles — Provide temporary role credentials to applications running on EC2 instances, but are specifically tied to EC2. The broader requirement described is best met by AWS STS.

• Authenticating websites with TLS/HTTPS
• Enabling certificate-based VPN authentication
• Signing or encrypting email
• Supporting device or user authentication

• VLAN tagging: Uses network-frame tags, such as 802.1Q; it does not rely on X.509 certificates.
• LDAP: May integrate with PKI in some environments, but X.509 certificates are not most commonly associated with LDAP itself.
• MFA: Certificates can be one authentication factor, but X.509 is fundamentally a PKI technology.

• A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

• B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

• D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

• E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.
• F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

• L2TP uses UDP port 1701 for the L2TP control channel.
• The destination port is 1701; the source port is a dynamically chosen ephemeral port on the client (not 1701).
• Therefore the statement that both source and destination ports are 1710 is incorrect (and 1710 is not the standard L2TP port).

• The destination port should be 1701, not 1710.
• The source port should be an ephemeral port chosen by the client, not 1701.

• Amazon Kendra is a managed enterprise search service that can index content stored in S3 and support natural-language queries to find text inside documents (PDFs, Word files, etc.).

• Rekognition analyzes images/videos, not document text search.
• Polly is a text-to-speech service.
• Lex is a chatbot service.

• Create a Kendra index.
• Add a data source of type S3 and point it to your bucket (with an IAM role that allows access).
• Configure/document conversion if needed, then index the data.
• Use the Kendra API or console to run natural-language queries against your indexed documents.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• Answer: No

• Why: Using several Azure AD directories (tenants) would create separate identity stores for each division, which significantly increases administrative overhead. You’d need cross-tenant access management, separate governance, and duplicated admin efforts, which goes against the goal of minimizing administrative work.

• How to meet the goal instead:

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

bash 
docker run -it microsoft/azure-cli:0.10.17

• docker run starts an Azure CLI container; it does not automatically connect to the AKS cluster.
• The command does not run kubectl apply.
• The container would need the appropriate Kubernetes tools and AKS credentials.
• The device or container must obtain cluster credentials, typically using an AKS credential command, before running Kubernetes commands.

bash 
az aks get-credentials --resource-group <resource-group> --name <aks-cluster> 
kubectl apply -f myapp.yaml

• Short answer: The correct term is Anti-forensics (option D), not “Felony.”

• Why: The actions described—hiding files in slack space, changing file headers, placing suspicious files in executables, and altering metadata—are classic anti-forensics techniques. They’re used to hinder or obscure forensic analysis, not to label the act as a legal category.

• About the options:

• Note: The provided answer key lists B (Felony), which is misleading for this exam objective. The exam typically tests knowledge of forensics concepts, where anti-forensics is the correct category.

• Correct answer: D – Do not enable default administrative accounts to ensure accountability.

• A – Do not use encryption methods … backups and sensitive information: Encryption helps protect data; not using it increases risk, not reduces insider threats.
• B – Do not allow administrators to use unique accounts during installation: We actually want unique admin accounts, not the opposite.
• C – Do not control the access to administrators and privileged users: Failing to control access directly enables misuse.

• Azure Resource Manager (ARM) templates define Azure resources in a declarative JSON file.
• You can deploy the same template repeatedly for each business unit, ensuring that identical resources are created consistently.
• Templates reduce manual administrative effort and support repeatable, automated deployments.
• Parameters can customize values such as names, regions, and sizes while keeping the overall resource configuration the same.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• 6-phone boxes: 6x
• 8-phone boxes: 8x

• The correct setting to configure is the Enrollment Status Page (ESP) profile.
• Why: ESP tracks the enrollment progress and logs during Autopilot provisioning. You can enable log collection within the ESP policy so that, if ESP times out, the user can collect and share the logs with support.
• Optional enhancement: In the ESP policy (or the Autopilot diagnostics settings), you can enable:

• Automatic enrollment settings: control how devices auto-enroll, not log collection.
• Windows Autopilot deployment profile: controls deployment steps but not ESP log collection.
• Device configuration profile: applies settings but doesn’t provide ESP log collection mechanics.

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

• Correct answer: D — use the same hashing algorithm as the sender's to create a numerical representation of the file.

• Integrity is verified by recomputing the hash on the received data and comparing it to the sender’s hash. This must use the same hash function; if you use a different algorithm, the digests won’t match even if the data is intact.
• The hash output is a fixed-length digest (a numerical representation). Whether you call it a “binary image” or a “numerical representation,” the key is that you generate the same type of digest with the same algorithm and compare them.

• A: same algorithm but the result is described as a binary image instead of a digest; you still compare the digest, but the phrasing is less precise.
• B/C: using a different algorithm would produce a different digest, causing false mismatch or failure to verify integrity.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Detect risky sign-ins from unfamiliar or unidentified IP addresses
• Evaluate user or sign-in risk
• Automatically require a password change because of a risky sign-in

• User risk policy: Can require a user to securely change their password when the account may be compromised.
• Sign-in risk policy: Can require MFA or block access based on the risk of a particular sign-in.

• Elicited and documented customer requirements
• Converted them into clear, measurable specifications
• Validated the requirements with the customer
• Used them as the basis for design, quality checks, and acceptance

• A: Requirements should reflect the customer’s needs—not the supplier’s standards.
• B: Iteration review planning does not replace proper requirements collection.
• D: A retrospective occurs after work is completed and is mainly for process improvement, not initial requirements definition.

• Permanent table (E): Correct. A dropped permanent table can be restored with UNDROP TABLE during its Time Travel retention period. Permanent tables also have Fail-safe protection.
• Transient table: It can also generally be restored during its shorter Time Travel period, although it has no Fail-safe. Therefore, excluding it makes the question questionable.
• Temporary table: Usually cannot be recovered after it is dropped; its lifecycle is limited to the session.
• Materialized view (D): The answer key treats it as recoverable, but recovery behavior depends on the specific Snowflake object/version capabilities. It should not be confused with an ordinary view.

• IaaS: You manage the virtual machine’s operating system, configuration, applications, and data. Azure manages the physical infrastructure and virtualization platform.
• PaaS: You deploy applications without managing the underlying operating system or servers.
• SaaS: You consume a complete application managed by the provider, such as Microsoft 365.

• Correct answer: B (No, it does not).

• A purchase agreement in Dynamics 365 SCM is a vendor-side price arrangement. It sets prices/discounts for what your company buys from suppliers, not for what you sell to customers.
• The objective in Question 2 is to give clients a quantity-based discount on items they purchase from you. To accomplish this, you should configure a sales price / trade agreement (on the customer/sales side), not a purchase agreement.
• In a sales price trade agreement, you can define quantity breaks such as:

• Create a Sales price trade agreement for the item and relevant customer (or customer group).
• Add quantity breaks: 51–100 with 10% discount, 101+ with 15% discount.
• Ensure the agreement is active for the desired date range.

• Planning – identifying the need, objectives, scope and resources.
• Analysis – understanding business requirements and current problems.
• Design/development – determining how the system will work.
• Implementation – installing the system and putting it into operation.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• Review iteration length: Changing duration does not resolve unclear requirements.
• Limit work in progress: Useful when excessive multitasking is the problem, but it does not directly clarify requirements.
• Review individual performance: The issue is a process and backlog-quality problem, not necessarily an individual performance problem.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• What the dataflow options mean:

• Why C fits best:

• A assigned without var becomes a global variable (in non-strict mode). So after myFunction(), a = 5 is accessible.
• b is declared with var inside the function, so it’s local to that function (function-scoped). It’s not defined in the outer (global) scope.

• console.log(a) prints 5.
• console.log(b) throws a ReferenceError: b is not defined.

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• Use one Azure AD directory for the organization.
• Separate divisions with subscriptions and/or resource groups.
• Assign each division’s administrator appropriate Azure role-based access control (RBAC) permissions, scoped to their subscription or resource group.

• AWS IoT Greengrass supports local ML inference using models trained in Amazon SageMaker.
• The model and inference code run on the factory’s local server, so processing continues even when internet connectivity is unavailable.
• A Greengrass component can:

• This provides low latency and avoids sending images to AWS for every inference.

• A: Uses AWS-hosted services and therefore depends on internet connectivity. It would fail during an outage.
• C: Snowball Edge is unnecessary for this use case and adds deployment complexity. A local Greengrass server is the intended edge-inference solution.
• D: Amazon Monitron is designed for monitoring industrial equipment health, not analyzing camera images with a custom SageMaker model.

• The inference container image or built-in algorithm
• The location of model artifacts in Amazon S3
• IAM permissions through the execution role
• Optional environment variables and networking settings

1. Create AWS::SageMaker::Model
2. Create an AWS::SageMaker::EndpointConfig that references the model
3. Create AWS::SageMaker::Endpoint that references the endpoint configuration

• AWS::SageMaker::Endpoint hosts a model but does not define the model itself.
• AWS::SageMaker::NotebookInstance provides a development environment.
• AWS::SageMaker::Pipeline orchestrates ML workflow steps.

• I can’t view the images, so I can’t tell which table is labeled as A in your screenshot. But here’s how to decide:

• How to identify the fact table:

• How to identify the surrogate key in the Patient table:

• Relationship:

• Vertical scaling (scale up) means increasing the size of an existing VM—for example, adding CPU or RAM.
• Vertical scaling down means reducing the VM’s size when less capacity is needed.
• Horizontal scaling (scale out) means adding more VM instances rather than making one VM larger.
• Elasticity is the broader ability to automatically adjust resources based on demand; it does not specifically mean adding CPU or memory to one VM.
• Agility refers to the ability to provision or change resources quickly.

• R-squared (R²): mede quanto da variação dos valores reais é explicada pelo modelo. É mais usado em regressão, não em classificação.

• Accuracy (acurácia): mede a proporção de previsões corretas em relação ao total. É adequada para a classificação de imagens da questão.

• RMSE (Root Mean Squared Error): mede o tamanho médio dos erros entre valores previstos e reais, penalizando erros maiores. É usado principalmente em regressão.

• Learning rate (taxa de aprendizado): controla o tamanho dos ajustes feitos pelo modelo durante o treinamento. Não é uma métrica de avaliação; é um hiperparâmetro.

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• Failed login attempts
• The account being targeted
• The source user or system
• Time and frequency of attempts

• Two-factor authentication: Helps prevent unauthorized access, but does not primarily detect the employee’s attempts.
• Firewall: Controls network traffic; it generally does not monitor individual login attempts.
• Intrusion prevention system (IPS): Can detect certain network attacks, but this scenario is best addressed through authentication and audit logging.

• Answer:

• Why:

• Why the other centers aren’t the right fit here:

• Which Security policy matches
• Which NAT rule/translation is selected
• Which PBF rule applies
• Which route is used

text 
test security-policy-match ... 
test nat-policy-match ... 
test pbf-policy-match ... 
test routing fib-lookup ...

• Product Owner: May attend, but is not required unless also working as a Developer.
• Scrum Master: May attend to help facilitate or coach, but is not required.
• Developers: Must participate because the event is specifically for them.

• Import — Loads data into Power BI. It requires a refresh, so it may not reflect changes within two minutes unless refresh is configured appropriately.
• Live connection — Connects to an existing Power BI semantic model or Analysis Services model; it is not the normal choice for connecting directly to an Azure SQL database.

• Entradas grandes, de até aproximadamente 1 GB.
• Processamentos demorados, que podem levar até cerca de 1 hora.
• O cliente envia a solicitação e consulta o resultado depois, sem precisar manter uma conexão aberta durante todo o processamento.

• Real-time inference: indicada para respostas imediatas, com entradas menores e processamento rápido.
• Serverless inference: adequada para cargas variáveis e solicitações menores; não é ideal para processamento longo e arquivos grandes.
• Batch transform: processa grandes volumes em lote, mas não atende à necessidade de respostas próximas do tempo real.