Test Prep EMT Exam Prep
EMT (Page 17 )

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

• Data loss prevention (DLP): Helps detect or prevent sensitive data from being copied or transmitted, but it does not primarily protect a stolen laptop’s stored data.
• Operating system hardening: Reduces vulnerabilities and attack surface but does not encrypt files if the device is stolen.
• Boot security: Helps ensure that only trusted software starts, but it does not fully protect the drive if an attacker accesses it offline.

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.

• A: Reduce management overhead — This is generally an advantage of public cloud, not hybrid cloud. Hybrid environments can increase management complexity.
• B: Cross-platform virtualization — Not the defining advantage of hybrid cloud.
• D: Leverage IaaS and PaaS — Public clouds commonly provide both IaaS and PaaS, so this is not unique to hybrid cloud.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• nomes de pessoas;
• organizações;
• locais;
• datas;
• números de processos;
• leis ou contratos.

• NER = identifica informações específicas e classificáveis.
• Sumarização = reduz um documento e apresenta seus pontos principais.

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

• Users logging in more frequently than average
• Logins occurring during non-business hours
• Patterns that may indicate compromised credentials or suspicious access

• Login History: Shows individual login attempts and basic details, but does not provide behavioral analysis or averages.
• Login Inspector: Used to troubleshoot or inspect a specific login attempt, rather than analyze organization-wide patterns.
• Login Report: May provide reportable login information, but it is not the specialized tool for forensic behavioral analysis.

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• Forecasting lets sales leaders predict revenue for upcoming fiscal periods, compare forecasts with targets, and review performance by salesperson or team.
• Opportunity Stages help determine the likelihood that opportunities will close. Each stage can have a probability, which contributes to forecast calculations.

• Sales Quotes: Used to present pricing or product proposals to customers; they do not provide revenue forecasting.
• Opportunity List View: Helps users filter and view opportunities, but it is not the forecasting tool.

• Discovers sensitive data in Amazon S3 buckets
• Uses machine learning and pattern matching to identify data such as personally identifiable information (PII)
• Helps assess S3 security and privacy risks
• Generates findings for potentially sensitive or exposed data

• Amazon Detective: Investigates security findings and performs root-cause analysis.
• Amazon GuardDuty: Detects threats and suspicious activity across AWS accounts and workloads.
• AWS IAM Access Analyzer: Identifies resources that are accessible from outside their intended trust zone, such as publicly accessible S3 buckets.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• Normalize casing in the data source—for example, convert all values to uppercase or lowercase.
• Add an index key to provide a unique, stable identifier for each row or value.

• The servers run different operating systems: Windows, Linux, and Unix.
• Containers generally share the host operating system’s kernel, so they cannot normally run workloads requiring unrelated kernels, such as Windows and Linux, on the same Linux host.
• A hypervisor can create separate virtual machines, allowing each VM to run its own guest OS.
• A Type 2 hypervisor runs on top of a host operating system and can support multiple guest operating systems.

• A — VARIANT "null" values are not the same as SQL NULL: Correct.

• B — Frequent, single-row DMLs: Incorrect.

• C — Validate data before loading into the target table: Correct.

• D — Use staging tables to manage MERGE statements: Correct.

• Amazon S3 — Object storage, not a database.
• Amazon DynamoDB — Fully managed NoSQL key-value and document database.
• Amazon Redshift — Managed data warehouse designed for analytics, not primarily transactional MySQL workloads.

• B — Prompts and suggestions retained for 28 days
• C — User engagement data kept for two years

• The key distinction is between content data—your prompts, code context, and generated suggestions—and engagement data, such as usage activity.
• Do not confuse retention with training: enterprise Copilot data is generally not used to train GitHub’s models without appropriate authorization.
• For a current exam, verify the policy version cited by the exam provider. The key’s C is likely correct, but B should be treated cautiously and may no longer reflect the current policy.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• Admin access to the deployment pipeline (B) – lets the developers use the pipeline and deploy content.
• Contributor access to the Development and Test workspaces (E) – required to deploy items into those workspaces.
• Viewer access to the Production workspace (D) – lets them view Production content without allowing deployment or modification.

• Contributor access to Production (F), because that could allow changes or deployment there.
• Viewer access to Development/Test (C), because Viewer is insufficient for deployment.
• Build permission to Production semantic models (A), because building reports on a semantic model is not required merely to view Production items.

• B: Trigger.Once + scheduled job

• C: 10-minute processing-time trigger

• Low usage during the first three weeks
• Very high usage during the last week

• High availability: Keeps services running despite failures.
• High latency: Means slow response times; it is not a benefit.
• Load balancing: Distributes traffic across resources but does not specifically address scaling resources up and down.

• NIDS: Monitors network traffic for suspicious activity and network-based attacks targeting the application or its supporting services.
• HIPS: Protects an individual host by monitoring processes, files, and system activity. It can help secure the web server, but it is not focused specifically on the application’s network attack surface.
• SIEM: Aggregates and correlates logs; it does not directly prevent attacks.
• Honeypot: A decoy system, not the primary protection for a production web application.
• Certificate revocation list: Deals with certificate trust, not application exploitation.

• Customer: Dual
• Date: Dual
• Sales: DirectQuery
• SalesAggregate: Import

• Sales – DirectQuery: Near-real-time data should not rely on an imported cache. DirectQuery sends queries to the source when visuals are loaded, allowing recent sales data to appear.
• SalesAggregate – Import: A weekly refresh is sufficient, and imported data generally gives faster visual performance because it is stored in Power BI’s in-memory cache.
• Customer and Date – Dual: These are dimension tables used with both the DirectQuery Sales table and the imported SalesAggregate table. Dual allows Power BI to use cached data when possible, while still behaving appropriately in queries involving DirectQuery data. This can improve performance and reduce unnecessary limited relationships.

• Internal interface ? connected toward the corporate network/internal firewall
• External interface ? connected toward the Internet-facing firewall

1. A route for the internal corporate network through the internal-facing interface/firewall.
2. A default route (0.0.0.0/0) through the Internet-facing interface/firewall.

• SOW
• SLA
• MOA
• MOU

• Authentication — verifies who the user is.
• Authorization — determines what the authenticated user is allowed to access.
• Accounting — records session activity, such as login time and resource usage.

• CIA — confidentiality, integrity, and availability; core security objectives.
• ACL — access control list; rules that permit or deny traffic or access.
• PEM — Privacy Enhanced Mail, an older email security standard.

• Issuer: Identifies the party issuing a SAML message—usually the identity provider in the assertion. It is not the Salesforce-specific identifier the architect should provide for differentiating Salesforce.
• Identity Provider Login URL: The endpoint where users are sent to authenticate.
• SAML identity location: Determines where the user identity is found in the SAML assertion, such as the subject or an attribute.

• Subject: The entity that initiates an action—here, Derrick/user account.
• Object: The resource being accessed— the file.
• Action: Reading the file.

• Works across SaaS and internal applications: TOTP is widely supported by authentication systems and can be integrated into many applications.
• Device manufacturer agnostic: A hardware token or authenticator application can generate the code without depending on a specific computer or phone manufacturer.
• Offline capability: The code is generated locally using a shared secret and the current time; an internet connection or cellular service is not required.

• Username and password: May work offline but provides weaker authentication and does not meet the intended improvement in security.
• Biometrics: Can depend on device hardware, operating-system support, and enrollment mechanisms.
• SMS verification: Requires cellular connectivity and is vulnerable to threats such as SIM swapping.

• A. Microsoft 365 group with Assigned membership
• C. Microsoft 365 group with Dynamic User membership

Why?

• Assigned membership: You explicitly add User1, User2, and User3.
• Dynamic User membership: Membership is automatically determined by a rule based on user attributes.

Why the other options are incorrect

• B and D: Security groups do not support the Microsoft 365 group expiration policy.
• E: Dynamic Device groups are intended for devices, not these users, and are also security groups.

• tag=Priv searches the tag field for values beginning with Priv. The wildcard can match the remaining characters, so it matches Privileged.
• tag=Priv would search for the exact tag Priv, not Privileged.
• tag=priv* uses lowercase priv; tag matching is treated as case-sensitive here, so it may not match the tag Privileged.
• tag=privileged uses the wrong capitalization for the exact tag.

• A. Number ? Decimal — Correct. Salesforce Number fields are represented in Apex as Decimal.
• D. Date/Time ? Datetime — This is correct conceptually, but “Dateline” is not an Apex type. If the option literally says “Dateline,” it is incorrect.
• E. Checkbox ? Boolean — Correct. A checkbox contains true or false.

• Number ? Integer — A Number field maps to Decimal, even when its scale is zero.
• Text Area ? List<String> — A text area maps to a single String, not a list.

sql 
GRANT ALTER ON SCHEMA::schemaA TO User1;

• TRUNCATE TABLE is a DDL operation, not a normal DELETE.
• Having DELETE permission on a table is not sufficient to truncate it.
• The minimum relevant permission is ALTER on the table.
• Granting ALTER on SCHEMA::schemaA allows the user to truncate tables within schemaA.
• It does not grant equivalent permissions on schemaB or schemaC, satisfying least privilege.

text 
interface GigabitEthernet0/0.10 
 encapsulation dot1Q 3

• .10 is the router’s local subinterface number.
• dot1Q 3 identifies the 802.1Q VLAN tag carried on the trunk.

text 
interface GigabitEthernet0/0.3 
 encapsulation dot1Q 3

text 
interface GigabitEthernet0/0.2 
 encapsulation dot1Q 2

• SAML: Enables federated authentication and single sign-on between the IdP and SaaS providers.
• OAuth tokens: Allow delegated application access; OAuth is not primarily the first step for employee SSO.
• Password vaulting: Stores or autofills multiple passwords but does not eliminate the separate credentials or provide true federation.

• The VPN gateway is in VirtualNetworkA.
• Gateway transit is configured on the peering associated with the VNet that contains the gateway—here, VirtualNetworkA.
• A peered VNet may use the remote gateway through the appropriate peering option, but this does not automatically update an existing P2S client’s routes.
• The Windows 10 workstation’s P2S VPN client package was created before VirtualNetworkB was peered, so it may not have a route for VirtualNetworkB.

• Import: Copies data into the Power BI model. It requires scheduled or manual refresh, so it may not meet the two-minute requirement.
• Live connection: Connects to an existing Power BI semantic model or Analysis Services model; it is not the appropriate choice for connecting directly to the Azure SQL database in this scenario.

• IKE: Negotiates security parameters for IPsec VPNs; it does not identify switch ports.
• VLAN: A logical network segmentation method, not a discovery protocol.
• netstat: Displays local network connections and listening services, but cannot identify the physical switch or port.

• Honeypots: Decoy systems or services made to attract attackers. Legitimate users should not interact with them, so activity there is a strong indicator of malicious behavior.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system. This can reveal infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies and analyzes potential threats before or during system design.
• Data obfuscation: Makes data harder to understand or interpret.

• s3:GetObject for the relevant objects
• s3:ListBucket if listing is required
• Appropriate bucket and object resource permissions

• B: Making the bucket public is insecure and unnecessary.
• C: Prompt engineering cannot override AWS IAM or encryption permissions.
• D: Data sensitivity does not determine whether the role can access it.

• B — Single customer login across properties: Customer 360 Identity provides centralized identity services, allowing an organization to recognize a customer across multiple digital properties and applications. This helps UC understand authenticated activity as part of a broader customer identity.

• C — Multi-brand support: Customer 360 Identity can support multiple brands and user experiences. Identity services can remain centralized while correlating a customer’s activity across different corporate brands or channels.

• A: Customer 360 Identity does not automatically populate all data into Customer 360 Data Manager and Customer 360 Audiences. Integration and data configuration are still required.
• D: Tracking anonymous activity and linking it after sign-up may be possible through broader customer-data and tracking implementations, but it is not the primary Customer 360 Identity benefit tested here. Identity focuses mainly on authentication, registration, and cross-property identity correlation.

• 6-phone boxes: 6x
• 8-phone boxes: 8x

• Customers access the portal without needing a full Dynamics 365 license.
• They submit case information through portal forms.
• The submitted data is stored in Dataverse tables, such as the Case table.
• Security is controlled using web roles and table permissions, so customers can access only appropriate records.

• Dynamics 365 Connector — connects apps to Dynamics 365 data but is not the portal’s underlying data platform.
• Microsoft SharePoint — useful for documents and collaboration, not the standard case-management data source for portals.
• Microsoft Azure Storage — stores files or other data, but is not the native portal business-data platform.