Test Prep GED Section 5: Mathematics Exam Prep
Section Five : Mathematics (Page 9 )

• 6-phone boxes: 6x
• 8-phone boxes: 8x

• Portfolio definition cycle — establishes and maintains the portfolio strategy, objectives, and management framework.
• Portfolio delivery cycle — coordinates and monitors the delivery of change initiatives, ensuring the portfolio remains aligned with strategic objectives and delivers value.

• Practice — a structured area of portfolio management activity, such as risk management or resource management.
• Technique — a method used to perform an activity; it is not the term for portfolio delivery itself.
• Principle — a guiding rule for effective portfolio management.

• Cloud architecture
• Data architecture
• Platform engineering
• Data engineering
• Provisioning and modernization

• Data protection is associated mainly with security and risk management.
• Data governance belongs to the governance perspective.
• Data science is not an AWS CAF capability.

• Database data: Aggregates are used to retrieve structured data, commonly from entities and database sources.
• Screen scope: A Screen Aggregate belongs to the screen where it is defined and is not directly reusable as a screen-level aggregate elsewhere.
• Asynchronous and parallel execution: Multiple Screen Aggregates can run asynchronously and in parallel, helping the screen load data efficiently.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• Modelo de embeddings de texto: trabalha principalmente com texto, não sendo adequado para imagens.
• Modelo generativo multimodal: pode interpretar ou gerar conteúdo de vários tipos, mas não é a opção específica para busca por similaridade.
• Modelo de geração de imagens: cria imagens a partir de entradas, não realiza busca multimodal.

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• A — Correct: Identify the data required by Salesforce, its dependencies, and how it should be validated. Verification scripts help confirm record counts, relationships, field mappings, and data integrity after migration.
• D — Correct: Use a full sandbox and perform trial migrations using realistic—or appropriately masked—legacy data. This exposes transformation, volume, dependency, and integration issues before production cutover.
• B — Less appropriate: Phased user migration and parallel operation primarily address user adoption and rollout risk, not the technical risks of data migration.
• C — Less appropriate: Although sandbox testing and integration testing are valuable, the option emphasizes test-data generation rather than validating the migration with representative legacy data. “A full sandbox for all systems” may also be impractical.

• Field name and label
• Data type
• Reference table
• Default value
• Whether the field is mandatory or read-only
• Field attributes and configuration

• A: Labels and translations are handled through documentation and translation-related records.
• C: Table relationships may be represented through reference fields, but this is not the primary description of the Dictionary.
• D: Spell-checking language data is unrelated to the System Dictionary.

• Code suggestions: Inline completions as you write code, such as lines, functions, or blocks.
• Chat: An interactive interface for asking questions, explaining code, generating code, and helping with debugging.

• Knowledge Base: Not listed as a standard Copilot Individual IDE feature in this context.
• Pull Request Diff Analysis: More closely associated with GitHub-based code review or pull-request features, not the core Individual IDE extension capabilities.

• Guiding principles
• Governance
• Service value chain
• Practices
• Continual improvement

• Guiding principles: Recommendations that guide decisions and actions; they do not describe the entire system.
• Four dimensions: Perspectives used to ensure a balanced approach to service management.
• Service relationship: Describes cooperation between a service provider and service consumer, rather than the whole value-creation system.

• Árvores de decisão: usam regras sequenciais, como “se característica X > valor, siga para este ramo”. São fáceis de visualizar e explicar. Atendem bem a problemas de classificação e regressão com alta interpretabilidade.

• Regressão linear: prevê um valor numérico contínuo, como preço, custo ou temperatura. Não é a escolha principal para classificar genes em categorias.

• Regressão logística: calcula a probabilidade de uma categoria. Pode atender à classificação, inclusive multiclasses, mas sua explicação costuma ser menos intuitiva que uma árvore para documentar decisões.

• Redes neurais: atendem a tarefas complexas, como imagens, texto e padrões não lineares. Porém, são menos interpretáveis, funcionando mais como uma “caixa-preta”.

• B. Data loss prevention (DLP): Helps prevent sensitive data from being copied, emailed, or exfiltrated. It is not the primary control for protecting a stolen laptop’s stored data.
• C. Operating system hardening: Reduces vulnerabilities by disabling unnecessary services and applying secure settings, but it does not necessarily protect the files if the disk is accessed directly.
• D. Boot security: Helps ensure the device starts only through trusted software or approved processes. It supports platform integrity but does not itself encrypt stored files.

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• How quickly the vendor must respond to an incident or request
• Target resolution times
• Availability or uptime requirements
• Performance metrics and penalties for not meeting them

• SOW (Statement of Work): Describes the project’s scope, tasks, deliverables, and timeline.
• MOA (Memorandum of Agreement): Documents a formal agreement to cooperate or perform specific activities.
• MOU (Memorandum of Understanding): Records a mutual understanding or intent, often less binding than a contract.

• Supervised learning requires labeled examples to learn how to classify customers.
• Reinforcement learning learns through actions, rewards, and penalties, which is not the main task here.
• RLHF uses human feedback to improve model behavior, typically for generative AI, not customer segmentation.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• Uses on-premises data or resources
• Runs components in the cloud
• Can scale across multiple cloud environments when demand increases

• Public cloud: Resources are hosted entirely by a cloud provider.
• Private cloud: Resources are dedicated to one organization, usually in its own environment.
• Hybrid: Combines on-premises and cloud resources.

• The current and previous versions
• Which clauses were changed
• When each revision occurred
• Potentially, who made the changes

• Version validation: Verifies a version’s accuracy or integrity but does not primarily track revisions.
• Version changes: Not the standard name for a formal document-management process.
• Version updates: Describes updating a document, not the complete process of managing and tracking its revisions.

• Hardware and infrastructure
• System software
• Networks and communications
• Technology platforms and services

• Business Architecture: Defines business strategy, organization, functions, and processes.
• Data Architecture: Defines the structure and management of enterprise data.
• Application Architecture: Describes application systems and how they interact to support business and data processing.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Whether a user has a console password
• Password age and last password change
• Whether MFA is enabled
• Access key status
• Access key creation date and last-use information
• Access key age, which helps audit rotation

• IAM Access Analyzer identifies unintended access to resources; it does not report credential age or rotation.
• AWS Artifact provides AWS compliance documents and agreements, not details about your IAM users.
• AWS Audit Manager helps collect evidence for audits, but it is not the direct tool for viewing IAM credential rotation details.

• Planning and designing products and services
• Developing and delivering them
• Managing risks, suppliers, and resources
• Measuring performance
• Continually improving value delivery

• Value stream steps describe activities used to create and deliver value; they do not themselves provide the broader capabilities.
• Vision and operating model provide direction and structure, but they are not the practical management capabilities that enable the work.
• Value chain is the operating model showing how activities combine to create value; it is enabled by practices and resources.

• A. Microsoft 365 group with Assigned membership
• C. Microsoft 365 group with Dynamic User membership

Why?

• Assigned membership: You explicitly add User1, User2, and User3.
• Dynamic User membership: Membership is automatically determined by a rule based on user attributes.

Why the other options are incorrect

• B and D: Security groups do not support the Microsoft 365 group expiration policy.
• E: Dynamic Device groups are intended for devices, not these users, and are also security groups.

• ARP poisoning: Redirects or intercepts local network traffic; it would more likely affect communication paths or cause man-in-the-middle behavior.
• Jamming: Interferes with wireless signals. The scenario does not indicate a wireless outage.
• Kerberoasting: Attempts to obtain service-account password hashes from Kerberos; it is a credential attack, not typically a direct service outage.

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A sophisticated attack sponsored by a government.
• Shadow IT: Unapproved technology or access methods used by employees.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• Customer: Dual
• Date: Dual
• Sales: DirectQuery
• SalesAggregate: Import

• Sales – DirectQuery: Near-real-time data should not rely on an imported cache. DirectQuery sends queries to the source when visuals are loaded, allowing recent sales data to appear.
• SalesAggregate – Import: A weekly refresh is sufficient, and imported data generally gives faster visual performance because it is stored in Power BI’s in-memory cache.
• Customer and Date – Dual: These are dimension tables used with both the DirectQuery Sales table and the imported SalesAggregate table. Dual allows Power BI to use cached data when possible, while still behaving appropriately in queries involving DirectQuery data. This can improve performance and reduce unnecessary limited relationships.

• Tactics: The attacker’s overall goal, such as gaining persistence or exfiltrating data
• Techniques: The methods used to achieve that goal
• Procedures: The specific implementation or sequence of actions

• IP addresses and hash values: Useful indicators, but they can change quickly.
• Indicators of compromise: TTPs may help identify IOCs, but their main value is describing behavior.
• Tools: Attackers can replace tools or use legitimate administrative utilities.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

• The files are stored in a document library, which is exposed through the SharePoint Folder connector.
• The connector returns file metadata, including Folder Path, Name, and Content.
• In Power Query, filter Folder Path so only files in the manufacturing reports folder are retained.
• You can then combine the remaining Excel files because they all have the same structure.

• SharePoint List is for SharePoint lists, not document-library files.
• Combine & Load combines files immediately, before you filter to the required folder, and may include unwanted files.
• Transform gives you the opportunity to filter the file list first, which is more efficient and targeted.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Technology or access methods used outside approved IT processes.

• A: Using an external OAuth 2.0 identity provider could provide unified identity, but it does not specifically address Salesforce capacity or high-volume login limits.
• B: Making the Experience Cloud community a SAML identity provider and using JIT provisioning is a possible federation pattern, but it may not be appropriate for this scale without Salesforce validation.
• C: A default account is unrelated to solving identity unification and high login throughput. Person Accounts can be supported in appropriate B2C Commerce integrations.

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

• Data loss prevention (DLP): Helps detect or prevent unauthorized data transfers, but does not directly protect data on a stolen, powered-off laptop.
• Operating system hardening: Reduces vulnerabilities and attack surface, but does not adequately protect stored data if the device is stolen.
• Boot security: Helps prevent unauthorized operating systems or boot media from loading. It supports device security but is not the primary solution for protecting the data itself.

• SQL injection
• Cross-site scripting (XSS)
• Malicious file uploads
• Common web-application exploits

• Layer 4 firewall: Filters primarily by IP addresses, ports, and transport protocols; it lacks detailed web-application inspection.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specialized for protecting web applications.
• UTM: Combines several security functions in one device, but it is not specifically focused on web-application attacks.

• R-squared: Typically used for regression, not classification.
• RMSE: Measures prediction error for continuous numerical values, so it is not the best fit here.
• Learning rate: A training hyperparameter that controls how quickly the model updates its weights; it is not an evaluation metric.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

• A: Describes a broad purpose and direction, but is not the specific CIMA definition.
• C: “Scoping out” activities is too vague and incomplete.
• D: Combines long-term goals, strategies and policies, but describes a wider strategic-planning statement rather than the definition of strategy itself.

• B: Moving the task may affect the critical path and should not be done before evaluating the planned response and impacts.
• C: Excluding a required task is not appropriate without formal analysis and stakeholder approval.
• D: Lessons learned and the risk log should be updated, but only after or alongside managing the immediate issue; updating them is not the first action.

• Which Security policy matches
• Which NAT rule/translation is selected
• Which PBF rule applies
• Which route is used

text 
test security-policy-match ... 
test nat-policy-match ... 
test pbf-policy-match ... 
test routing fib-lookup ...

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• AWS Budgets lets you create a cost or usage budget and configure alerts when actual or forecasted spending reaches a threshold. Notifications can be sent through email or Amazon SNS.
• Amazon CloudWatch can monitor AWS billing metrics and trigger an alarm when estimated charges exceed a specified amount.

• Amazon SQS is a message queue, not a cost-monitoring service.
• Cost Explorer analyzes spending but does not directly provide threshold notifications.
• AWS Cost and Usage Report delivers detailed billing data for analysis; it does not itself send threshold alerts.