Test Prep GMAT Test Exam Prep
Graduate Management Admission Test: Analytical Writing Assessment (AWA), Quantitative section, Verbal section (Page 32 )

• Data Category Groups e categorias;
• Visibilidade dessas categorias para perfis ou permission sets.

• B e C: regras de compartilhamento não são o mecanismo apropriado para restringir resultados de busca do Knowledge por divisão.
• D: a role hierarchy não é o mecanismo principal para controlar a visibilidade de categorias do Knowledge. Além disso, a configuração correta é atribuir visibilidade a perfis ou permission sets.

• AWS Budgets lets you create a cost or usage budget and configure alerts when actual or forecasted spending reaches a threshold. Notifications can be sent through email or Amazon SNS.
• Amazon CloudWatch can monitor AWS billing metrics and trigger an alarm when estimated charges exceed a specified amount.

• Amazon SQS is a message queue, not a cost-monitoring service.
• Cost Explorer analyzes spending but does not directly provide threshold notifications.
• AWS Cost and Usage Report delivers detailed billing data for analysis; it does not itself send threshold alerts.

• B — Single customer login across properties: Customer 360 Identity provides centralized identity services, allowing an organization to recognize a customer across multiple digital properties and applications. This helps UC understand authenticated activity as part of a broader customer identity.

• C — Multi-brand support: Customer 360 Identity can support multiple brands and user experiences. Identity services can remain centralized while correlating a customer’s activity across different corporate brands or channels.

• A: Customer 360 Identity does not automatically populate all data into Customer 360 Data Manager and Customer 360 Audiences. Integration and data configuration are still required.
• D: Tracking anonymous activity and linking it after sign-up may be possible through broader customer-data and tracking implementations, but it is not the primary Customer 360 Identity benefit tested here. Identity focuses mainly on authentication, registration, and cross-property identity correlation.

• R-squared: Typically used for regression, not classification.
• RMSE: Measures prediction error for continuous numerical values, so it is not the best fit here.
• Learning rate: A training hyperparameter that controls how quickly the model updates its weights; it is not an evaluation metric.

• Tokenization: Replaces the value with a nonsensitive token, often reversible through a secure token vault.
• Hashing: Converts data into a one-way fixed-length value, generally used for integrity checks or password storage.
• Obfuscation: A broad term for making data difficult to understand; it is less precise than masking in this context.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• Reviewing and validating generated code
• Checking security, licensing, and quality concerns
• Testing the implementation
• Making the final design and coding decisions

• A: Copilot is not a complete replacement for developers.
• C: Human input, review, and oversight are still required.
• D: Copilot Chat supports many tasks beyond debugging, including explanation, generation, refactoring, and testing assistance.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A sophisticated attack sponsored by a government.
• Shadow IT: Unapproved technology or access methods used by employees.

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• A: Person Accounts cannot be merged directly with standard Contact records.
• C: There is no Account Setup option that automatically merges Person Account duplicates.
• D: Matching rules and duplicate rules can help identify or prevent duplicates, but they do not automatically merge Person Accounts. Also, relationship considerations do not change the basic merge capability.

• Server provisioning
• Operating systems and runtime infrastructure
• Scaling
• Much of the maintenance and patching

• Thin clients reduce endpoint hardware requirements but do not specifically streamline code deployment.
• Private cloud provides dedicated cloud infrastructure but usually requires more management and expense.
• Virtual machines improve resource utilization, but administrators still manage the VMs, operating systems, and deployments.

json 
"Resource": "arn:aws:s3:::bucket-name/*"

• A: Revoking or changing an instance profile does not reliably invalidate temporary credentials that have already been issued and may still be valid.
• B: Changing the EC2 security group does not necessarily stop the attacker from using the stolen credentials from elsewhere.
• C: Amazon Macie helps discover sensitive data; Object Lock prevents modification/deletion, not reads or downloads.

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

1. Start with the Customer table.
2. Use Merge Queries and select the Address table.
3. Match Customer[Address ID] to Address[Address ID].
4. Use a Left Outer join so every customer is retained.
5. Expand only City, State/Region, and Country.

• Append adds rows vertically; it is for stacking similarly structured tables.
• Group By summarizes rows and does not retrieve address columns.
• Transpose swaps rows and columns and is unrelated to table relationships.

• A. Microsoft 365 group with Assigned membership
• C. Microsoft 365 group with Dynamic User membership

Why?

• Assigned membership: You explicitly add User1, User2, and User3.
• Dynamic User membership: Membership is automatically determined by a rule based on user attributes.

Why the other options are incorrect

• B and D: Security groups do not support the Microsoft 365 group expiration policy.
• E: Dynamic Device groups are intended for devices, not these users, and are also security groups.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

• Resources that do not need internet access should remain on private network segments.
• Internet-facing access should be restricted to systems that require it.
• Access should be explicitly allowed rather than broadly exposed.

• A: A single administrator with access to core functions may violate least privilege if that access is broader than necessary.
• B: Inspecting traffic supports monitoring and defense, but does not itself limit privileges.
• C: Updating routing configurations supports availability and connectivity, not least privilege.

• A — Correct: Flow Builder is declarative and visual, so administrators and other non-developers can participate in designing and improving business processes without writing Apex.
• D — Correct: Flow Builder provides visual debugging tools, allowing an admin to test paths, inspect variable values, and identify where a specific business case fails.
• E — Correct: A flow’s visual structure documents the logic and makes later maintenance easier than reading and updating custom Apex code.

• B — Incorrect: Flow debugging does not attach a debugger to live customer sessions. The admin uses Flow Builder’s debug functionality with test inputs; this is not live-session debugging and should not be used to monitor real customer transactions.

• A — Can help keep costs down and improve quality: The provider may have specialist expertise, efficient systems and economies of scale.
• B — There is a known fee if agreed in advance: A fixed or agreed fee can make costs more predictable and support budgeting.
• C — Allows management to focus on core operations and issues: Senior managers spend less time supervising routine finance processes and more time on strategic matters.

• Increased control: Control may decrease because the activity is performed externally.
• Increased independence: The organisation becomes dependent on the supplier.
• Increased understanding of the outsourcing business: The internal organisation usually has greater business knowledge; the provider may initially lack it.
• Increased confidentiality: Sharing financial information externally may create confidentiality risks.
• Internal expertise improved: Outsourcing can reduce opportunities to develop internal finance skills.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Transfer — przeniesienie skutków lub kosztów ryzyka na inna organizacje, np. przez ubezpieczenie lub umowe.
• Akceptacja — firma swiadomie przyjmuje ryzyko bez dodatkowych dzialan.
• Mitigacja — zmniejszenie prawdopodobienstwa wystapienia ryzyka lub jego wplywu, np. przez wdrozenie kontroli bezpieczenstwa.
• Unikanie — calkowite wyeliminowanie ryzykownej dzialalnosci.

• Supervised learning requires labeled examples to learn how to classify customers.
• Reinforcement learning learns through actions, rewards, and penalties, which is not the main task here.
• RLHF uses human feedback to improve model behavior, typically for generative AI, not customer segmentation.

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

1. Get Data > Folder

1. Expand the Attributes column

1. Remove the Content column

• Folder connector: lists files and their metadata, but also includes a Content binary column.
• Combine Files: processes and combines the actual CSV contents, which is explicitly disallowed here.

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

• Users logging in more frequently than average
• Logins occurring during non-business hours
• Patterns that may indicate compromised credentials or suspicious access

• Login History: Shows individual login attempts and basic details, but does not provide behavioral analysis or averages.
• Login Inspector: Used to troubleshoot or inspect a specific login attempt, rather than analyze organization-wide patterns.
• Login Report: May provide reportable login information, but it is not the specialized tool for forensic behavioral analysis.

• D — Create sibling resource pools for the Production VMs and Test VMs.

• B — Configure a memory reservation on the Production resource pool.

• Shares only determine relative priority when resources are scarce; they do not guarantee memory.
• A parent resource pool alone does not provide a guarantee.
• A child pool for Test VMs does not reserve memory for Production.

• 16GB RAM: A 64-bit OS is needed to use more than roughly 4GB effectively, but RAM capacity does not prove the CPU supports 64-bit operation.
• 500GB HDD: Storage capacity has no bearing on OS architecture.
• 1Gbps Ethernet: Network speed is unrelated to CPU architecture.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio management
• Data governance
• Risk management
• Compliance

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• Monitoring: Detects activity but does not remove the underlying risk.
• Patching: Useful for systems that must remain operational, but these desktops are unused.
• Isolating: Can be a temporary containment measure, but permanently removing unnecessary systems is more appropriate.

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

• Personally identifiable information (PII) detection

• Prompt Shields

• Self-harm content filtering addresses self-harm-related content.
• Violence content filtering addresses violent content.
• Neither protects customer PII or detects document-based prompt injection.

• Field name and label
• Data type
• Reference table
• Default value
• Whether the field is mandatory or read-only
• Field attributes and configuration

• A: Labels and translations are handled through documentation and translation-related records.
• C: Table relationships may be represented through reference fields, but this is not the primary description of the Dictionary.
• D: Spell-checking language data is unrelated to the System Dictionary.

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.

• The Subscribe to Reports user permission.
• At least Viewer access to the report’s folder.
• Access to the report itself.

• Subscribe to Reports: Run Reports is not the relevant Salesforce permission.
• Chatter Subscribe to Reports is not a Salesforce permission.
• Set Running User relates to configuring the user whose permissions determine report results—not subscribing to a report.

• Sending calls to available agents quickly
• Balancing interactions across agents
• Preventing calls from being handled manually one at a time

• Workforce Management: Forecasts demand and schedules enough staff; it supports wait-time reduction but does not directly distribute calls.
• Skill-based Routing: Routes calls based on agent skills and may improve the customer experience, but the question is asking about the core feature that distributes calls efficiently.
• IVR: Lets callers navigate menus and self-service options; it does not primarily assign calls to agents.

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• Inherent risk: Risk that exists before controls are implemented.
• Avoided risk: Risk eliminated by choosing not to perform the risky activity.
• Operational risk: Risk arising from failures in processes, people, systems, or daily operations.