Test Prep HSPT Test Exam Prep
High School Placement Test (Page 36 )

• Static IP address: Not needed if the workstation already has network connectivity.
• Subnet mask: Incorrect subnetting would usually prevent local communication, including pinging the server.
• Default gateway: Primarily affects communication outside the local network; it does not normally prevent finding an internal domain controller.

• A static IP gives the surveillance system a predictable local address, so users can reliably reach it on the LAN.
• However, a static IP does not block internet-based login attempts. If the router exposes the device through port forwarding, attackers could still reach it.
• Port mapping normally exposes an internal service externally, so A is a poor choice as written.
• Subnetting alone also does not block traffic; it would require routing/firewall rules.

• COE: Identifies the Center of Excellence, such as Payroll or Benefits.
• Topic Detail: Classifies the HR service within its COE; it does not identify the catalog item.
• Template: Supplies default values or case configuration.
• Record Producer: Represents the catalog item that employees use to submit the request and create the case.

• 24 cores: Available in the Business Critical provisioned-compute configurations.
• Approximately 124 GB memory: Matches the memory capacity of the relevant Business Critical hardware configuration.
• More than 50,000 IOPS: Business Critical uses local SSD storage and provides the high I/O performance required here.
• 500 GB storage: Well within the tier’s supported capacity.

• Premium: The DTU-based Premium tier does not provide the required combination of compute, memory, and I/O characteristics.
• Hyperscale: Hyperscale is primarily intended for very large databases and independent storage scaling. It is not the best match for these specific high-memory and high-IOPS requirements.

• Third-party attestation: Provides independent validation, but is typically periodic and performed by an external party.
• Penetration testing: Simulates attacks to identify exploitable vulnerabilities; it does not primarily track compliance.
• Vulnerability scans: Identify technical weaknesses, but do not provide a detailed review of procedures or compliance activities.

• Act as the default gateway for devices in that VLAN
• Route traffic between different VLANs
• Provide management access to the switch

text 
interface vlan 10 
 ip address 192.168.10.1 255.255.255.0

1. Which host originated the infection
2. Whether each other host is clean or infected
3. Which firewall or host logs provide evidence of the infection’s movement

• Find the earliest infection-related event. The host associated with that event is the likely origin.
• Follow the timeline: outbound connections from that host may indicate propagation or command-and-control activity.
• A host receiving suspicious traffic is not automatically infected; look for evidence that it executed or initiated malicious activity.
• A firewall log can show traffic paths, but endpoint logs are usually needed to confirm infection.
• Mark a host clean only when the logs show no indicators of compromise or malicious activity.

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• A local network gateway represents an on-premises network—its address space and VPN device information—for an Azure Site-to-Site VPN connection.
• It does not control which connection types are allowed between Azure web servers and database servers.
• It is also unnecessary when both server groups are in the same Azure virtual network.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• The connected switch
• The switch’s port/interface
• Device and port descriptions
• Sometimes VLAN or management information

• IKE: Establishes security associations for IPsec VPNs.
• VLAN: Defines logical network segmentation; it does not identify a physical switch port.
• netstat: Displays local network connections and statistics, not the upstream switch and port.

• The requirement is an assessment of the Azure environment’s design, which requires a support plan offering proactive architectural guidance.
• Premier support would provide this capability, but it is a high-cost option.
• Since the requirement says to minimize expenses, Premier is not the best recommendation.
• A lower-cost plan with the required advisory/design-review capability—historically Professional Direct in Azure’s support-plan model—would be more appropriate.

• Determine risk tolerance: Tolerance defines how much variation or exposure the organization is willing to accept. Scenarios may help apply tolerance, but they do not primarily determine it.
• Determine risk appetite: Risk appetite is established at an enterprise or governance level. Scenarios help compare risks with the appetite; they do not normally establish it.
• Develop risk responses: Once risks are identified and assessed, scenarios support response planning. However, response development comes later.

• Each directory is a separate identity boundary.
• Managing multiple directories increases administrative overhead.
• Users and administrators may need separate identities or additional configuration across tenants.
• Resources in a subscription are associated with one Microsoft Entra tenant.

• Management groups for governance across subscriptions
• Separate subscriptions for divisions when appropriate
• Resource groups to organize resources
• Azure role-based access control (RBAC) to give each division’s administrator access only to their own resources

text 
user<TAB>action<TAB>status

text 
user|action|status

• Colons: Although colons commonly appear in log data, they are not a supported delimiter choice in the FX workflow described by this exam question.
• Spaces: Spaces are not treated as a supported delimiter for this extraction method; ordinary text often contains variable spacing.

• Tokenization: Replaces the value with a nonsensitive token, often reversible through a secure token vault.
• Hashing: Converts data into a one-way fixed-length value, generally used for integrity checks or password storage.
• Obfuscation: A broad term for making data difficult to understand; it is less precise than masking in this context.

• Which batches and markets are affected
• Whether the deficiency affects product quality, efficacy, or patient safety
• Whether the issue is an ongoing manufacturing problem
• Whether immediate containment or distribution suspension is needed

• A — Withdraw the product: may be necessary, but is premature before assessing the risk.
• B — “Dear Dr.” letter: may be appropriate later, depending on the risk.
• C — Notify global authorities: may become mandatory, but the scope and urgency depend on the assessment.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

1. Horizontal scaling — Yes

1. Vertical scaling — Yes

1. Scaling can manage costs — Yes

• Horizontal = more or fewer instances
• Vertical = larger or smaller instances

• Form layout
• Related lists
• Dictionary settings
• UI policies
• Client scripts
• Views and field visibility

• Personalization usually affects only the individual user.
• System configuration can affect other users, depending on its scope and conditions.

• Access List: controls whether a client is allowed or denied.
• Connect List: controls which wireless networks/APs a station may connect to.

• Error correction (ECC): Improves data reliability but does not maximize bandwidth.
• RAM voltage: Increasing voltage may affect stability or speed, but it is not the primary method for increasing module bandwidth.
• Physical module size: Refers to the capacity or form factor of the RAM, not its data-transfer bandwidth.

• Namespace: The namespace associated with the code where the checkpoint was set.
• Time: When the checkpoint was captured or executed.

• Exception: Exceptions are viewed through debug logs or execution results, not as the primary Checkpoints tab information.
• Debug Statement: System.debug() output belongs in the Logs tab. A checkpoint captures program state, such as variables and their values, at a specific point in execution.

1. Discovery tries the SSH probe first.
2. SSH fails.
3. Discovery tries SNMP, which succeeds.
4. Discovery records SNMP as the preferred service for that IP.
5. Future discoveries try SNMP first.

• Classification identifies the type of device, such as a server, router, or printer.
• Credential affinity remembers which credentials work for a device.
• MID Server affinity associates a device or network with a particular MID Server.
• IP service affinity specifically controls the preferred discovery protocol or service.

• Footprinting is reconnaissance used to map an organization’s network, hosts, naming conventions, and services.
• A name such as fshare.int.complia.org suggests an internal file-sharing host (fshare) and an internal naming structure (int).
• This can reveal useful information to an attacker before attempting exploitation.

• ISP-assigned address space: Usually determined through public registration and DNS data, not an internal hostname.
• DNS sinkhole bypass: Would involve avoiding redirected malicious-domain queries.
• Initial access: DNS reconnaissance alone does not compromise the server.
• Data exfiltration: DNS tunneling typically generates many encoded or unusually long subdomain queries, not simply a meaningful internal hostname.

• Menerjemahkan soal ke bahasa Indonesia.
• Menyebutkan jawaban yang benar.
• Menjelaskan alasan jawaban tersebut.
• Memberi tahu jika kunci jawaban yang tersedia tampaknya keliru.
• Menjelaskan istilah teknis penting dalam soal.

• terraform apply
• terraform destroy

• Deterrent control: The signs warning people they may be filmed discourage unauthorized or malicious behavior. They may prevent incidents by influencing behavior, but their primary purpose is to deter.
• Detective control: The CCTV system monitors and records activity so security personnel can identify suspicious or unauthorized actions.

• Preventive: Blocks or prevents an incident, such as a lock or access-control system.
• Corrective: Fixes or restores systems after an incident.
• Directive: Tells people what they must do, typically through policies or procedures.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

• A. PsFile — Correct: Displays files opened remotely on a system. This reveals shared resources and user activity.
• B. UserInfo — Correct: Gathers information about user accounts, supporting account and privilege enumeration.
• C. PsPasswd — Answer key lists it: This is questionable. PsPasswd is primarily used to change passwords remotely, not enumerate information. The key may classify it broadly as a Windows account-management tool, but it is not a strong enumeration example.
• D. WinSSLMiM — Incorrect: Used for SSL man-in-the-middle activity, not enumeration.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer attacks

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and transport protocols; it cannot deeply inspect web application content.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specifically designed to protect web applications.
• UTM: Combines several security functions in one appliance, but it is not the most targeted solution for a web portal.

DAX 
Sales % of Total = 
DIVIDE( 
    [Total Sales], 
    CALCULATE( 
        [Total Sales], 
        ALLSELECTED(Products) 
    ) 
)

DAX 
Total Sales = 
SUM(Sales[SalesAmount])

Why ALLSELECTED is required

• The numerator, [Total Sales], is evaluated for the current product.
• ALLSELECTED(Products) removes the current product’s visual filter when calculating the denominator.
• It preserves filters applied at the report, page, or slicer level.

Why not ALL(Products)?

DAX 
CALCULATE([Total Sales], ALL(Products))

bash 
OTEL_SERVICE_NAME=foundry-agent

bash 
OTEL_SERVICE_NAME=langchain-service

python 
import os 


os.environ["OTEL_SERVICE_NAME"] = "langchain-service" 


from azure.ai.openai... # import your tracing components 
from azure.monitor.opentelemetry import configure_azure_monitor 


configure_azure_monitor( 
    connection_string=os.environ["APPLICATIONINSIGHTS_CONNECTION_STRING"] 
)

• Agent application: OTEL_SERVICE_NAME=foundry-agent
• LangChain application: OTEL_SERVICE_NAME=langchain-service

• A user connects with their Google account.
• Google associates the user’s SSH key with that identity.
• IAM roles determine whether they can log in.
• Access can be tied to a specific employee for auditing.
• Removing the IAM role removes their login access.

• compute.osLogin: regular OS login access
• compute.osAdminLogin: OS login with administrative privileges, typically including sudo

text 
enable-oslogin=TRUE

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

• The Azure DevOps (Boards only) connector is designed specifically for Azure DevOps Analytics views.
• It authenticates directly to Azure DevOps and lets you select an existing Analytics view.
• Filters defined in the Analytics view are applied by Azure DevOps before Power BI retrieves the data, reducing the amount of data transferred.

• Azure DevOps Server (Boards only) is for on-premises Azure DevOps Server.
• OData Feed can consume OData endpoints, but it is not the dedicated Azure DevOps Analytics-view connector.
• OData queries are not the intended dedicated connector for this requirement.

• Relationship cardinality:

• Filter direction:

• Active versus inactive relationships: only active relationships automatically propagate filters.
• Blank or unmatched values: a fact-table value without a matching dimension row can create the model’s blank/unknown member.
• Uniqueness: the “one” side must contain unique values; duplicate keys generally belong on the “many” side.

• Admin access to the deployment pipeline
• Contributor access to the Development and Test workspaces
• Viewer access to the Production workspace

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

• Dataset file: Use Import mode. Excel files are imported into Power BI, and the two Sales tables can be combined with Power Query.
• Report file: Use a live connection to the published dataset. This keeps the report separate from the dataset and avoids importing the data again.

• Report file: DirectQuery/live connection
• Dataset file: Import

• contoso.onmicrosoft.com
• contoso1.onmicrosoft.com

• onmicrosoft.com domains: Maximum of five per tenant.
• Custom domains: Domains that your organization owns and verifies in Microsoft 365.

• How quickly the vendor must respond to incidents or requests
• Availability or uptime requirements
• Resolution time targets
• Performance expectations and penalties for failing to meet them

• SOW (Statement of Work): Describes the work, deliverables, scope, and schedule.
• MOA (Memorandum of Agreement): Documents an agreement in which parties commit to specific responsibilities.
• MOU (Memorandum of Understanding): Records a general intention to cooperate; it may not be legally binding.

• S3 Glacier Deep Archive is designed for long-term archival data with very infrequent access and has a lower storage cost than S3 One Zone-IA.
• The documents are copies stored elsewhere, so reduced availability and delayed retrieval are acceptable.
• An S3 interface VPC endpoint allows private access from the VPC without exposing the bucket through the public internet.
• A bucket policy can restrict access to requests coming through that endpoint.