AAFM GLO_CWM_LVL_1 Exam Prep
Chartered Wealth Manager (CWM) Global Examination (Page 60 )

• Compensating control: The server is end-of-life, so it may no longer receive security patches or support. Placing it on a restricted VLAN provides an alternative layer of protection by reducing who can access it and limiting its exposure.
• Technical control: VLAN segmentation and access control lists (ACLs) are technology-based mechanisms that enforce network access restrictions automatically.

• Managerial: Policies, procedures, and governance—not network configuration.
• Physical: Locks, guards, or barriers.
• Corrective: Restores systems after an incident.
• Detective: Identifies suspicious activity rather than restricting access.
• Deterrent: Discourages behavior but does not enforce access rules.

• Mesh: WAPs communicate wirelessly with one another, often to extend coverage without wired connections. It does not specifically describe centralized WLC management.
• Point-to-point: Connects two specific devices or locations.
• Ad hoc: Wireless devices communicate directly with one another without an access point.

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

• Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

• Logs to review (across hosts and firewall):

• How to identify the origin:

• How to classify other hosts:

• Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

sql 
SELECT COUNT(*) FROM table;

• A: It does not normally need to scan all data files for this operation.
• B: Results are not simply reused from a query cache every time. Caching is separate from Delta’s metadata optimization.
• D: The relevant metadata is maintained through the Delta transaction log, not directly treated as a Parquet-file metadata operation in this context.

• Premium file shares: contoso104 only
• Blob access tiers: contoso101, contoso102, and contoso103

• Premium Azure Files shares require a storage account with the FileStorage account kind. This is a specialized account type and is not used for blob storage.
• Blob access tiers such as Hot, Cool, and—where supported—Archive apply to blob-capable accounts, such as General-purpose v2 or BlobStorage accounts shown in the exhibit.
• contoso104 is therefore excluded from the blob-tier selection because it is the premium Files account.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• Admin access to the deployment pipeline (B) – lets the developers use the pipeline and deploy content.
• Contributor access to the Development and Test workspaces (E) – required to deploy items into those workspaces.
• Viewer access to the Production workspace (D) – lets them view Production content without allowing deployment or modification.

• Contributor access to Production (F), because that could allow changes or deployment there.
• Viewer access to Development/Test (C), because Viewer is insufficient for deployment.
• Build permission to Production semantic models (A), because building reports on a semantic model is not required merely to view Production items.

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• Regional leads — Customer Community Plus

• Capacity planners — External Identity

• Customer Community does not provide the enhanced reporting/dashboard access required by regional leads.
• An Identity license is generally for internal Salesforce identity use and does not fit the external capacity-planning users as well as External Identity.

• B: Moving the task may affect the critical path and should not be done before evaluating the planned response and impacts.
• C: Excluding a required task is not appropriate without formal analysis and stakeholder approval.
• D: Lessons learned and the risk log should be updated, but only after or alongside managing the immediate issue; updating them is not the first action.

• A — Increasing the minimum password length to 14 characters: Longer passwords have more possible combinations, making them harder to guess or crack through brute force.
• F — Requiring at least one special character: This increases password complexity and expands the possible character combinations.

• MD5 to SHA-512: Improves password-hash resistance, but does not stop users from choosing easy-to-guess passwords. Also, modern systems should use a password-specific hashing algorithm such as bcrypt, scrypt, or Argon2.
• Increasing maximum age to 120 days: Leaves weak passwords in use longer.
• Reducing minimum length to 10: Makes guessing easier.
• Reducing minimum age to zero: Allows immediate password changes but does not make the password itself harder to guess.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• Updating the CRL: Revokes compromised certificates, but does not fix the CA flaw that allowed them to be created.
• Changing passwords: May be necessary if accounts were compromised, but it does not address the certificate-generation vulnerability.
• Implementing SOAR: Improves security automation and response; it does not remediate the underlying PKI weakness.

• Create Power Query parameters for the Azure SQL server/database—or at least the database name.
• Use the parameter in the PBIX connection.
• Publish the same PBIX separately to the relevant development, test, and production workspaces.
• Set each dataset’s parameter value in the Power BI service so it points to the corresponding Azure SQL database.

• Development dataset ? DevelopmentDB
• Test dataset ? TestDB
• Production dataset ? ProductionDB

• The same PBIX is used for every lifecycle stage.
• Each stage consumes data from its matching database.
• Deployment pipelines are not required.
• Azure SQL is a cloud source, so gateway administration is generally avoided.
• Only the parameter value differs between published datasets, reducing maintenance.

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

• I can’t view the images, so I can’t tell which table is labeled as A in your screenshot. But here’s how to decide:

• How to identify the fact table:

• How to identify the surrogate key in the Patient table:

• Relationship:

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

• Progress iteratively with feedback focuses on making improvements in manageable steps and learning from feedback.
• Optimize and automate focuses on maximizing value from resources and automating suitable activities.
• Start where you are focuses on assessing the current situation and reusing what already exists.

• Replace the keyboard: More expensive and unnecessary before simpler causes are ruled out.
• Replace the key switch: Laptop keyboards generally aren’t designed for individual switch replacement.
• Replace the circuit board: Excessive for a single nonworking key and not a cost-effective first step.

• An Anypoint VPC provides private network connectivity for CloudHub applications.
• An IPsec VPN tunnel or AWS Direct Connect connects that VPC to the customer’s on-premises network without exposing the database to the public internet.
• The VPC and on-premises firewalls must allow the required traffic, routes, and ports.

• Static IP addresses only identify the application’s outbound traffic; they do not create a private network path to the database.
• A Dedicated Load Balancer does not replace the required network connection to the on-premises environment. It is also unnecessary merely to reach individual databases.
• Moving sensitive databases to a DMZ is not the intended architecture and could reduce their protection.

• A private IP address on the virtual network
• An associated public IP address

• Input feature distributions differ from training data ? Analyze dataset drift metrics

• Model accuracy drops without code changes ? Analyze dataset drift metrics

• Endpoint latency increases under load ? Investigate scaling and infrastructure metrics

• Users logging in more frequently than average
• Logins occurring during non-business hours
• Patterns that may indicate compromised credentials or suspicious access

• Login History: Shows individual login attempts and basic details, but does not provide behavioral analysis or averages.
• Login Inspector: Used to troubleshoot or inspect a specific login attempt, rather than analyze organization-wide patterns.
• Login Report: May provide reportable login information, but it is not the specialized tool for forensic behavioral analysis.

1. Ensure BOMs can include subcomponents ? Configure an entity relationship

1. Report changes made by engineers ? Enable auditing

• Configure entity relationship
• Configure auditing

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

• SOW
• SLA
• MOA
• MOU

• A — Can help keep costs down and improve quality: The provider may have specialist expertise, efficient systems and economies of scale.
• B — There is a known fee if agreed in advance: A fixed or agreed fee can make costs more predictable and support budgeting.
• C — Allows management to focus on core operations and issues: Senior managers spend less time supervising routine finance processes and more time on strategic matters.

• Increased control: Control may decrease because the activity is performed externally.
• Increased independence: The organisation becomes dependent on the supplier.
• Increased understanding of the outsourcing business: The internal organisation usually has greater business knowledge; the provider may initially lack it.
• Increased confidentiality: Sharing financial information externally may create confidentiality risks.
• Internal expertise improved: Outsourcing can reduce opportunities to develop internal finance skills.

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• Short answer: The correct term is Anti-forensics (option D), not “Felony.”

• Why: The actions described—hiding files in slack space, changing file headers, placing suspicious files in executables, and altering metadata—are classic anti-forensics techniques. They’re used to hinder or obscure forensic analysis, not to label the act as a legal category.

• About the options:

• Note: The provided answer key lists B (Felony), which is misleading for this exam objective. The exam typically tests knowledge of forensics concepts, where anti-forensics is the correct category.

• What the dataflow options mean:

• Why C fits best:

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• Works across SaaS and internal applications: TOTP is widely supported by authentication systems and can be integrated into many applications.
• Device manufacturer agnostic: A hardware token or authenticator application can generate the code without depending on a specific computer or phone manufacturer.
• Offline capability: The code is generated locally using a shared secret and the current time; an internet connection or cellular service is not required.

• Username and password: May work offline but provides weaker authentication and does not meet the intended improvement in security.
• Biometrics: Can depend on device hardware, operating-system support, and enrollment mechanisms.
• SMS verification: Requires cellular connectivity and is vulnerable to threats such as SIM swapping.

1. Which host originated the infection

1. Which remaining hosts are infected

• B. Enable column profile — This turns on column profiling, which computes statistics like min and max for each column.
• C. Show column profile in details pane — This ensures the per-column profile is visible in the details pane.
• E. Enable details pane — This makes the details pane available so you can view the column profile there.

• A. Show column value distribution may help with distribution but isn’t specifically about min/max.
• D. Show column quality details shows data quality (valid/null counts), not min/max.

• The VPN gateway is in VirtualNetworkA.
• Gateway transit is configured on the peering associated with the VNet that contains the gateway—here, VirtualNetworkA.
• A peered VNet may use the remote gateway through the appropriate peering option, but this does not automatically update an existing P2S client’s routes.
• The Windows 10 workstation’s P2S VPN client package was created before VirtualNetworkB was peered, so it may not have a route for VirtualNetworkB.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• VM CPU, memory, disk, and network usage
• Storage transactions and latency
• App Service response time
• Database DTU or CPU utilization

• Azure Traffic Analytics analyzes network traffic flows and security patterns; it is not the general infrastructure metrics tool.
• Azure Activity Log records subscription-level control-plane operations, such as resource creation, deletion, or configuration changes.
• Azure Advisor provides recommendations about cost, security, reliability, performance, and operational excellence, but it is not the primary tool for investigating live metrics.

• Azure Resource Manager (ARM) templates define Azure resources in a declarative JSON file.
• You can deploy the same template repeatedly for each business unit, ensuring that identical resources are created consistently.
• Templates reduce manual administrative effort and support repeatable, automated deployments.
• Parameters can customize values such as names, regions, and sizes while keeping the overall resource configuration the same.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• Normalize casing in the data source—for example, convert all values to uppercase or lowercase.
• Add an index key to provide a unique, stable identifier for each row or value.