Free AWS Certified Advanced Networking - Specialty ANS-C01 exam questions in PDF & AI Tutor

QUESTION: 33

A company delivers applications over the internet. An Amazon Route 53 public hosted zone is the authoritative DNS service for the company and its internet applications, all of which are offered from the same domain name.

A network engineer is working on a new version of one of the applications. All the application's components are hosted in the AWS Cloud. The application has a three-tier design. The front end is delivered through Amazon EC2 instances that are deployed in public subnets with Elastic IP addresses assigned. The backend components are deployed in private subnets from RFC1918.

Components of the application need to be able to access other components of the application within the application's VPC by using the same host names as the host names that are used over the public internet. The network engineer also needs to accommodate future DNS changes, such as the introduction of new host names or the retirement of DNS entries.

Which combination of steps will meet these requirements? (Choose three.)

Add a geoproximity routing policy in Route 53.
Create a Route 53 private hosted zone for the same domain name Associate the application's VPC with the new private hosted zone.
Enable DNS hostnames for the application's VP
Create entries in the private hosted zone for each name in the public hosted zone by using the corresponding private IP addresses.
Create an Amazon EventBridge (Amazon CloudWatch Events) rule that runs when AWS CloudTrail logs a Route 53 API call to the public hosted zone. Create an AWS Lambda function as the target of the rule.
Configure the function to use the event information to update the private hosted zone.
Add the private IP addresses in the existing Route 53 public hosted zone.

Answer(s): B,C,D

Show Answer Next Question

QUESTION: 34

A company is deploying an application. The application is implemented in a series of containers in an Amazon Elastic Container Service (Amazon ECS) cluster. The company will use the Fargate launch type for its tasks. The containers will run workloads that require connectivity initiated over an SSL connection. Traffic must be able to flow to the application from other AWS accounts over private connectivity. The application must scale in a manageable way as more consumers use the application.

Which solution will meet these requirements?

Choose a Gateway Load Balancer (GLB) as the type of load balancer for the ECS service. Create a lifecycle hook to add new tasks to the target group from Amazon ECS as required to handle scaling. Specify the GLB in the service definition. Create a VPC peer for external AWS accounts. Update the route tables so that the AWS accounts can reach the GLB.
Choose an Application Load Balancer (ALB) as the type of load balancer for the ECS service. Create path- based routing rules to allow the application to target the containers that are registered in the target group.
Specify the ALB in the service definition. Create a VPC endpoint service for the ALB Share the VPC endpoint service with other AWS accounts.
Choose an Application Load Balancer (ALB) as the type of load balancer for the ECS service. Create path- based routing rules to allow the application to target the containers that are registered in the target group.
Specify the ALB in the service definition. Create a VPC peer for the external AWS accounts. Update the route tables so that the AWS accounts can reach the ALB.
Choose a Network Load Balancer (NLB) as the type of load balancer for the ECS service. Specify the NLB in the service definition. Create a VPC endpoint service for the NLB. Share the VPC endpoint service with other AWS accounts.

Answer(s): A

Show Answer Next Question

QUESTION: 35

A company's development team has created a new product recommendation web service. The web service is hosted in a VPC with a CIDR block of 192.168.224.0/19. The company has deployed the web service on Amazon EC2 instances and has configured an Auto Scaling group as the target of a Network Load Balancer (NLB).

The company wants to perform testing to determine whether users who receive product recommendations spend more money than users who do not receive product recommendations. The company has a big sales event in 5 days and needs to integrate its existing production environment with the recommendation engine by then. The existing production environment is hosted in a VPC with a CIDR block of 192.168.128
.

A network engineer must integrate the systems by designing a solution that results in the least possible disruption to the existing environments.

Which solution will meet these requirements?

Create a VPC peering connection between the web service VPC and the existing production VPC. Add a routing rule to the appropriate route table to allow data to flow to 192.168.224.0/19 from the existing production environment and to flow to 192.168.128.0/17 from the web service environment. Configure the relevant security groups and ACLs to allow the systems to communicate.
Ask the development team of the web service to redeploy the web service into the production VPC and integrate the systems there.
Create a VPC endpoint service. Associate the VPC endpoint service with the NLB for the web service.
Create an interface VPC endpoint for the web service in the existing production VP
Create a transit gateway in the existing production environment. Create attachments to the production VPC and the web service VPC. Configure appropriate routing rules in the transit gateway and VPC route tables for 192.168.224.0/19 and 192.168.128.0/17. Configure the relevant security groups and ACLs to allow the systems to communicate.

Answer(s): C

Show Answer Next Question

QUESTION: 36

A network engineer needs to update a company's hybrid network to support IPv6 for the upcoming release of a new application. The application is hosted in a VPC in the AWS Cloud. The company's current AWS infrastructure includes VPCs that are connected by a transit gateway. The transit gateway is connected to the on-premises network by AWS Direct Connect and AWS Site-to-Site VPN. The company's on-premises devices have been updated to support the new IPv6 requirements.

The company has enabled IPv6 for the existing VPC by assigning a new IPv6 CIDR block to the VPC and by assigning IPv6 to the subnets for dual-stack support. The company has launched new Amazon EC2 instances for the new application in the updated subnets.

When updating the hybrid network to support IPv6 the network engineer must avoid making any changes to the current infrastructure. The network engineer also must block direct access to the instances' new IPv6 addresses from the internet. However, the network engineer must allow outbound internet access from the instances.

What is the MOST operationally efficient solution that meets these requirements?

Update the Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices
Update the Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Update the existing VPN connection to support IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.
Create a Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.
Create a Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add a NAT gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.

Answer(s): A

Show Answer Next Question

QUESTION: 37

A network engineer must provide additional safeguards to protect encrypted data at Application Load Balancers (ALBs) through the use of a unique random session key.

What should the network engineer do to meet this requirement?

Change the ALB security policy to a policy that supports TLS 1.2 protocol only
Use AWS Key Management Service (AWS KMS) to encrypt session keys
Associate an AWS WAF web ACL with the ALBs, and create a security rule to enforce forward secrecy (FS)
Change the ALB security policy to a policy that supports forward secrecy (FS)

Answer(s): D

Show Answer Next Question

QUESTION: 38

A company has deployed a software-defined WAN (SD-WAN) solution to interconnect all of its offices. The company is migrating workloads to AWS and needs to extend its SD-WAN solution to support connectivity to these workloads.

A network engineer plans to deploy AWS Transit Gateway Connect and two SD-WAN virtual appliances to provide this connectivity. According to company policies, only a single SD-WAN virtual appliance can handle traffic from AWS workloads at a given time.

How should the network engineer configure routing to meet these requirements?

Add a static default route in the transit gateway route table to point to the secondary SD-WAN virtual
appliance. Add routes that are more specific to point to the primary SD-WAN virtual appliance.
Configure the BGP community tag 7224:7300 on the primary SD-WAN virtual appliance for BGP routes toward the transit gateway.
Configure the AS_PATH prepend attribute on the secondary SD-WAN virtual appliance for BGP routes toward the transit gateway.
Disable equal-cost multi-path (ECMP) routing on the transit gateway for Transit Gateway Connect.

Answer(s): C

Show Answer Next Question

QUESTION: 39

A company is planning to deploy many software-defined WAN (SD-WAN) sites. The company is using AWS Transit Gateway and has deployed a transit gateway in the required AWS Region. A network engineer needs to deploy the SD-WAN hub virtual appliance into a VPC that is connected to the transit gateway. The solution must support at least 5 Gbps of throughput from the SD-WAN hub virtual appliance to other VPCs that are attached to the transit gateway.

Which solution will meet these requirements?

Create a new VPC for the SD-WAN hub virtual appliance. Create two IPsec VPN connections between the SD-WAN hub virtual appliance and the transit gateway. Configure BGP over the IPsec VPN connections
Assign a new CIDR block to the transit gateway. Create a new VPC for the SD-WAN hub virtual appliance.
Attach the new VPC to the transit gateway with a VPC attachment. Add a transit gateway Connect attachment. Create a Connect peer and specify the GRE and BGP parameters. Create a route in the appropriate VPC for the SD-WAN hub virtual appliance to route to the transit gateway.
Create a new VPC for the SD-WAN hub virtual appliance. Attach the new VPC to the transit gateway with a VPC attachment. Create two IPsec VPN connections between the SD-WAN hub virtual appliance and the transit gateway. Configure BGP over the IPsec VPN connections.
Assign a new CIDR block to the transit gateway. Create a new VPC for the SD-WAN hub virtual appliance.
Attach the new VPC to the transit gateway with a VPC attachment. Add a transit gateway Connect attachment. Create a Connect peer and specify the VXLAN and BGP parameters. Create a route in the appropriate VPC for the SD-WAN hub virtual appliance to route to the transit gateway.

Answer(s): B

Show Answer Next Question

QUESTION: 40

A company is deploying a new application on AWS. The application uses dynamic multicasting. The company has five VPCs that are all attached to a transit gateway Amazon EC2 instances in each VPC need to be able to register dynamically to receive a multicast transmission.

How should a network engineer configure the AWS resources to meet these requirements?

Create a static source multicast domain within the transit gateway. Associate the VPCs and applicable subnets with the multicast domain. Register the multicast senders' network interface with the multicast domain. Adjust the network ACLs to allow UDP traffic from the source to all receivers and to allow UDP traffic that is sent to the multicast group address.
Create a static source multicast domain within the transit gateway. Associate the VPCs and applicable subnets with the multicast domain. Register the multicast senders' network interface with the multicast domain. Adjust the network ACLs to allow TCP traffic from the source to all receivers and to allow TCP traffic that is sent to the multicast group address.
Create an Internet Group Management Protocol (IGMP) multicast domain within the transit gateway.
Associate the VPCs and applicable subnets with the multicast domain. Register the multicast senders'
network interface with the multicast domain. Adjust the network ACLs to allow UDP traffic from the source to all receivers and to allow UDP traffic that is sent to the multicast group address.
Create an Internet Group Management Protocol (IGMP) multicast domain within the transit gateway.
Associate the VPCs and applicable subnets with the multicast domain. Register the multicast senders' network interface with the multicast domain. Adjust the network ACLs to allow TCP traffic from the source to all receivers and to allow TCP traffic that is sent to the multicast group address.

Answer(s): C

Show Answer Next Question

What the AWS Certified Advanced Networking - Specialty ANS-C01 Exam Tests and How to Pass It

The AWS Certified Advanced Networking - Specialty ANS-C01 certification is designed for individuals who perform complex networking tasks on the Amazon Web Services platform. This certification validates the technical expertise of professionals who design, implement, and manage network architectures across various AWS services. Employers in the cloud infrastructure and enterprise IT sectors prioritize this certification because it demonstrates a candidate's ability to handle sophisticated connectivity requirements, including hybrid cloud environments and intricate routing configurations. By achieving this credential, IT professionals prove they possess the specialized knowledge required to maintain secure, scalable, and highly available network solutions within the Amazon ecosystem.

What the AWS Certified Advanced Networking - Specialty ANS-C01 Exam Covers

The exam evaluates a candidate's proficiency across four primary domains: Network Design, Network Implementation, Network Management and Operation, and Network Security, Compliance, and Governance. In practical terms, this means you must be able to architect robust solutions that connect on-premises data centers to AWS, manage complex VPC configurations, and optimize traffic flow across global infrastructures. Our practice questions are structured to mirror these domains, ensuring that you encounter scenarios that test your ability to apply theoretical knowledge to real-world networking challenges. Whether you are configuring Direct Connect, managing transit gateways, or troubleshooting routing tables, the exam requires a deep understanding of how these components interact within the broader AWS environment. Mastering these core areas is essential for anyone looking to demonstrate their capability in managing enterprise-grade cloud networks.

The most technically demanding aspect of this certification often involves the intricacies of Network Design and Network Implementation, particularly when dealing with hybrid connectivity and multi-account architectures. Candidates are frequently tested on their ability to design scalable solutions that account for bandwidth requirements, latency constraints, and failover mechanisms in complex environments. This requires more than just knowing service definitions; it demands the ability to synthesize multiple AWS networking services into a cohesive, resilient architecture. Because these scenarios often involve overlapping CIDR blocks, complex BGP routing, and strict security requirements, candidates must demonstrate a high level of analytical rigor to select the most appropriate solution among several technically viable options.

Are These Real AWS Certified Advanced Networking - Specialty ANS-C01 Exam Questions?

The practice questions available on our platform are sourced and verified by the community, consisting of IT professionals and recent test-takers who have sat for the actual Amazon certification exam. Because these contributors have experienced the testing environment firsthand, our questions reflect what appears on the real exam, providing a realistic assessment of your current knowledge level. If you've been searching for AWS Certified Advanced Networking - Specialty ANS-C01 exam dumps or braindump files, our community-verified practice questions offer something more valuable, each question is verified and explained by IT professionals who recently passed the exam. We prioritize accuracy and pedagogical value over simple memorization, ensuring that you are preparing with high-quality, relevant material.

Community verification is the cornerstone of our platform's reliability, as it involves a collaborative process where users actively discuss answer choices and provide context from their recent exam experiences. When a question is flagged or debated, community members and subject matter experts review the logic, ensuring that the explanations align with current AWS best practices and documentation. This iterative feedback loop allows us to maintain a repository of questions that are not only accurate but also reflective of the nuances found in the actual certification exam. By engaging with these discussions, you gain insight into the reasoning behind complex networking decisions, which is far more effective than relying on static, unverified sources.

How to Prepare for the AWS Certified Advanced Networking - Specialty ANS-C01 Exam

Effective exam preparation requires a combination of hands-on experience in a sandbox environment and a thorough review of official Amazon documentation. You should prioritize building and troubleshooting network architectures yourself, as the exam heavily favors candidates who understand the practical application of services like AWS Transit Gateway, Route 53, and VPC peering. Every practice question includes a free AI Tutor explanation that breaks down the reasoning behind the correct answer, so you understand the concept, not just the answer. Developing a consistent study schedule that allows you to revisit difficult topics will help you solidify your understanding of complex networking concepts rather than relying on rote memorization.

A common mistake candidates make is underestimating the complexity of scenario-based questions, which require you to apply networking principles to specific business constraints. To avoid this, focus on understanding the "why" behind each architectural decision, such as why you would choose a VPN over a Direct Connect connection in a specific scenario. Time management is another critical factor during the certification exam, so practicing with timed sets of questions can help you build the stamina needed to analyze complex scenarios quickly. By focusing on deep conceptual understanding and utilizing the AI Tutor to clarify your doubts, you can approach the exam with the confidence that comes from true mastery of the material.

What to Expect on Exam Day

On the day of your certification exam, you should be prepared for a rigorous assessment that typically includes a mix of multiple-choice and multiple-response questions. These questions are often presented as detailed scenarios that require you to identify the most efficient, secure, or cost-effective networking solution for a given set of requirements. The exam is administered under strict conditions, usually through a proctored environment, either at a designated testing center or via online proctoring. You will have a set amount of time to complete the exam, and it is important to pace yourself, as some questions may require significant reading and analysis before you can determine the correct answer.

Who Should Use These AWS Certified Advanced Networking - Specialty ANS-C01 Practice Questions

This certification is intended for experienced network engineers who have several years of hands-on experience managing complex network environments. The ideal candidate is someone who is already comfortable with AWS networking services and is looking to formalize their expertise and advance their career in cloud architecture. Whether you are a cloud architect, a network administrator, or a systems engineer, this certification exam serves as a benchmark for your ability to handle the networking demands of large-scale enterprise deployments. Engaging in structured exam preparation is a vital step for professionals aiming to validate their skills and demonstrate their value to current or prospective employers.

To get the most out of these practice questions, avoid simply reading the correct answer and moving on; instead, engage deeply with the AI Tutor explanation to understand the underlying networking principles. Read through the community discussions to see how other professionals approach the same problem, as this can expose you to different perspectives and troubleshooting techniques. If you find yourself consistently getting certain types of questions wrong, flag them and revisit the relevant official documentation before attempting them again. Browse the questions above and use the community discussions and AI Tutor to build real exam confidence.

Amazon AWS Certified Advanced Networking - Specialty ANS-C01 Exam Actual Questions AWS Certified Advanced Networking - Specialty ANS-C01 (Page 6 )

QUESTION: 33

QUESTION: 34

QUESTION: 35

QUESTION: 36

QUESTION: 37

QUESTION: 38

QUESTION: 39

QUESTION: 40

What the AWS Certified Advanced Networking - Specialty ANS-C01 Exam Tests and How to Pass It

What the AWS Certified Advanced Networking - Specialty ANS-C01 Exam Covers

Are These Real AWS Certified Advanced Networking - Specialty ANS-C01 Exam Questions?

How to Prepare for the AWS Certified Advanced Networking - Specialty ANS-C01 Exam

What to Expect on Exam Day

Who Should Use These AWS Certified Advanced Networking - Specialty ANS-C01 Practice Questions

Amazon AWS Certified Advanced Networking - Specialty ANS-C01 Exam Actual Questions
AWS Certified Advanced Networking - Specialty ANS-C01 (Page 6 )