[Terms, Definitions, and Abbreviations]
Which of the following is the term for aggregate and/or cement that bounces away from a surface against which refractory is being projected by gunning?

Slurry
Trimmings
Rebound
Overspray

Answer(s): C

Show Answer Next Question

QUESTION: 9

[Installation Procedures]
Who is responsible to approve refractory dryout procedures that have more than one heat source?

Contractor
Owner
Manufacturer
Inspector

Answer(s): B

Show Answer Next Question

QUESTION: 10

[Installation Procedures]
During gunning, inclusion of rebound is minimized by which of the following techniques?

Begin gunning at the lowest level and work around to full thickness in a spiral pattern
Start at the lowest level elevation and build up gradually to full thickness in complete rings
Start at the lowest level and build up gradually to full thickness in an area not more than 10 ft² (1 m²)
Cover all areas up to 1/2-in (13 mm) thick stud tip thickness before building to full thickness

Answer(s): C

Show Answer Next Question

Download PDF Next Page

Viewing page 3 of 18
Viewing questions 11 - 15 out of 85 questions

Post your Comments and Discuss API API-936 exam prep with other Community members:

Comments:

Name:

API-936 Exam Discussions & Posts
API-936 AI Verifications

kenji_netops on: May 01, 2026
Spent weeks going over brain dumps and still found this exam very hard. Passed it but the stress was no joke.
United States

Gagan on: July 07, 2026
I am here to let u all know that I passed this exam today. The questions in the real exam are same same here. Like other people wrote here the free version gives 50% questions you need full version to buy. Full PDF has all questions.
Mumbai, India

LastMinuteLearner on: June 03, 2026
Passed it using brain dumps but it was a very hard adn stressful experience. The exam questions in the dumps helped but I was still uncertain the whole time.
Spain

jason_helpdesk on: May 29, 2026
Took two attempts to clear this exam and the brain dumps were my last resort after realizing how challenging it was. The AI Assistant helped me piece together the real exam questions I kept stumbling on.
Malaysia

rachel_ops on: June 19, 2026
Three weeks of sifting through brain dumps and real exam questions and I only managed to scrape by. This was a challenging exam and it left me drained beyond words.
Mexico

sysadmin_bob on: April 12, 2026
Took two attempts to pass this exam and used brain dumps a lot. Real exam quetions were very hard and stressed me out more than expected.
Saudi Arabia

NoSleepNoCert on: May 16, 2026
Spent weeks using braindumps and the AI Assistant for this exam but it was still very hard. Just cleared it yesterday and honestly relieved to have it over with.
Sri Lanka

yaml_yak on: June 25, 2026
Spent weeks trying to understand GitHub Actions as this exam was very hard. teh exam dumps were a relief in tackling the real exam questions.
United States

jason_helpdesk on: April 17, 2026
Three weeks of studying and teh real exam questions made it very hard. The exam dumps were the only thing that got me through.
France

mateus_aws_br on: April 21, 2026
Underestimated how challenging this exam would be and spent days grinding through braindumps to pass. The exam dumps were more helpful than expected but the struggle was real.
India

nerd_by_day on: June 02, 2026
Spent weeks going throgh the braindumps and real exam questions for this exam because it was very hard to grasp. The prep materials made it manageable but it took a lot of effort.
South Africa

NetwrkKing on: May 05, 2026
That was a very hard exam and teh brain dumps made it manageable enough to pass. Thankful for real exam questions that were in those dumps.
Ireland

wei_syseng on: April 07, 2026
Took two attempts and the exam was very hard with real exam questions that caught me off guard. The brain dumps helped a bit but the AI Assistant was what got me through.
New Zealand

TabsNotSpaces_T on: May 30, 2026
Took two attempts before passing since this exam was very hard without exam dumps. The AI Assistant didn't solve everything but the brain dumps gave me a needed boost.
Finland

nina_sysadmin on: May 20, 2026
Spent weeks on this challenging exam and the braindumps really helped. The AI Assistant was good for clarifying real exam questions.
Portugal

flashcard_fanatic on: March 31, 2026
The exam dumps felt outdated and the real exam questions caught me off guard. Was tougher than I anticipated even with all the prep material.
Czech Republic

v1rtual_v on: April 27, 2026
Real exam questions caught me off guard and the challenging exam made me appreciate having braindumps to practice with.
Egypt

Mildfed on: June 29, 2026
Practice questions and answer explanation help me to understand quicker
Davao City, Philippines

0day_ops on: April 20, 2026
Studied for what felt like forever and the exam dumps seriously helped but this exam was still very hard.
Colombia

TechNerd92 on: May 22, 2026
Passed it after feeling unprepared with the challenging exam as the AI Assistant and braindumps were my only guides.
Denmark

pkttracer_m on: April 02, 2026
Real exm questions threw me off initially so I had to rely heavily on brain dumps and spent countless nights grinding. Just cleared the exam and it was way harder than expected but the exam dumps really helped.
Sri Lanka

firewall_fan on: May 03, 2026
Three weeks of brain dumps and the AI Assistant barely got me through this exam. Very hard but somehow managed to pass.
Jordan

vlanjockey on: May 05, 2026
The exam dumps were not enough adn the real exam questions were much harder than expected. Very hard and felt completely caught off guard even with weeks of preparation.
New Zealand

liam_secops on: April 23, 2026
The real exam questions in this exam caught me off guard and the dumps didn't help much with the unexpected twists. The challenging exam content made me question my prep but the AI Assistant offered some clarity in the end.
Belgium

upskill_or_bust on: June 06, 2026
Took two attempts to pass this challenging exam using brain dumps adn it was still very hard. The real exam questions were a nightmare even with all the prep.
Hungary

WrongAnswerRight on: May 01, 2026
Underestimated this exam and had to grind throgh a lot of braindumps to finally make it. Real exam questions were very hard and the AI Assistant helped me get through.
Netherlands

weekend_warrior_w on: March 26, 2026
Just cleared this challenging exam using brain dumps adn the AI Assistant. Spent many hours stressed and relieved to barely pass.
Belgium

PassedOnThird on: May 20, 2026
Underestimated how tough this exam was adn really had to dig into those braindumps to get through it. The AI Assistant helped with some real exam questions but it was a grind.
Romania

CertHunter on: May 02, 2026
Spent weeks on this exam and the real exam questions were very hard. The braindumps helped a bit in the end but it wasn't easy.
Philippines

nerd_by_day on: June 04, 2026
Took two attempts to pass this exam because I underestimated it and had to dig through brain dumps. Real exam questions were tougher than expected.
UAE

p1ng_pro on: April 01, 2026
Finally done with this challenging exam and the exam dumps didn't cover half the real exam quetions I faced. The AI Assistant might help but it's still tough to predict what's coming.
Brazil

JustPassedBro on: June 01, 2026
The brain dumps were a relief but this exam was still very hard. Very stressful trying to find real exam questions that aligned.
Kenya

WhosJohnAcronym on: May 09, 2026
Barely made it through this exam with brain dumps but it was very hard and gave me quite the headache.
New Zealand

SkippedTheBook on: May 07, 2026
Spent weeks studying braindumps but the real exam questions still caught me off guard. Very hard and glad it's over.
Switzerland

scripts_and_certs on: July 04, 2026
Took two attempts to pass this exam and the braindumps were a big help alongside the AI Assistant. Very hard and left me drained but glad to be finished.
United States

0day_ops on: June 04, 2026
Hugely stressed from the challenging exam but brain dumps helped me barely pass.
Canada

homelab_hero on: May 08, 2026
Finally done with this exam which was very hard. Thought the brain dumps would help more but real exam quetions caught me off guard.
Germany

FortinetFred on: April 13, 2026
This exam was very hard and I don't think I could have passed without the exam dumps. Real exam questions helped a lot but the AI Assistant's guidance was essential.
Mexico

it_dad_of_3 on: June 09, 2026
Sustainable-Investing was very hard but the exam dumps made a big difference. Wouldn't have got through this exam without them.
UAE

ExamWarrior on: May 29, 2026
Underestimated this exam thinking it was just another certification but the real exam questions caught me off guard. Spent countless hours with exam dumps to finally pass.
Spain

bootcamp_grad_b on: June 07, 2026
The real exam quetions were very hard and after a lot of effort the brain dumps became my last resort to make sense of it all.
Qatar

t1_support_guy on: May 22, 2026
Spent weeks on the exam dumps but it was still a very hard exam. Just cleared the exam because the real exam questions were tricky and stressful.
Nigeria

Kamsi on: July 08, 2026
Good exam prep
Lagos, Nigeria

CloudCert_2026 on: April 15, 2026
Took two attempts to pass this exam after underestimating it the first time despite using all those braindumps. The real exam questions were way tougher than expected.
Pakistan

CertifiedFinally on: June 06, 2026
The exam seemed easy at first but turned out to be very hard. I had to rely heavily on brain dumps to get throgh it.
United States

SnowflakeSteve on: April 24, 2026
Spent a lot of time studying and found this exam very hard but the exam dumps provided some relief.
Turkey

uptime_unc on: April 02, 2026
Spent weeks on braindumps but the real exam questions caught me off guard. It was a very hard and challenging exam.
Switzerland

james_tech_uk on: April 14, 2026
Spent weeks on braindumps but the real exm questions were still very hard. The AI Assistant helped a bit but the exam was challenging.
Indonesia

nina_sysadmin on: May 07, 2026
The exam was very hard and I probably wouldn't have managed without brain dumps. Real exam questions aligned just enough to push me over the line.
Sri Lanka

CloudGuy_Mike on: May 19, 2026
This exam was very hard but the exam dumps helped a lot in understanding the pattern. Without the brain dumps the whole process would have been brutal.
Egypt

AI Explanation - verified by User9193 on: July 05, 2026
Question 9:

Correct answer: Seek baseline approval (C).

Why: After you’ve defined tasks, durations, resources, and costs, the next step is to formalize and approve the plan by establishing baselines (schedule, cost, and scope). Baseline approval locks the plan and provides a benchmark for measuring performance during execution.

How it differs from the other options:

- Update the work breakdown structure (WBS): typically done earlier to define the deliverables and tasks; may be revisited, but not the immediate next step after planning details are set. - Review the backlog: more related to Agile approaches; not the standard next step in a traditional plan baselining. - Establish the resource pool: part of planning, but by the time you’ve defined resources, the next formal step is to get baselined approval to use those plans for control.
Lilburn, United States

AI Explanation - verified by User3355 on: June 22, 2026
Question 15:
Question 15 explanation:

Correct answer: C. You should restore the VM to a new Azure VM.

Why:

In a ransomware scenario, you want to recover from a known-good backup in a clean environment to avoid reinfection.

Azure Backup Instant Restore lets you mount the backup and bring it up as a new VM, isolating it from the infected VM.

Restoring to the infected VM (A), or to any existing VM (B), risks reinfecting or conflicts, and restoring to an on-premises device (D) is not supported by Azure Backup Instant Restore.

After validating the new VM is clean, you can securely recover data and redeploy as needed.

Sandton, South Africa

AI Explanation - verified by User3233 on: June 24, 2026
Question 17:
Here’s a focused explanation of Question 17.

Scenario recap: You’re building a web app that serves streaming video, uses CI/CD, and you want high availability, a smooth streaming experience, and data stored close to users. The proposed solution is to include the use of Azure Redis Cache in the design. The question asks if this solution meets the goal (Yes/No).

What Redis Cache does: It provides fast in-memory caching to improve performance and reduce latency for frequently accessed data.

Why this alone doesn’t meet the goal:

- High availability across regions and constant streaming quality require more than a regional cache. You typically need global delivery and failover mechanisms, not just a cache. - Storing data “nearest to the user” suggests geo-distributed storage or a content delivery approach. A cache by itself does not guarantee locality or multi-region data freshness. - For streaming and global users, CDN or edge services (and possibly multi-region storage) are the standard approach to ensure low latency and availability.

Conclusion: The solution does not meet the goal. The correct answer is B (No). For global performance, you’d combine CDNs, global load balancing (e.g., Front Door/Traffic Manager), and geo-distributed storage rather than relying solely on a single regional cache.

Melissa, United States

AI Explanation - verified by User4703 on: June 17, 2026
Question 41:
Correct answer: D.
Why: In Power Query Editor, to turn a Date column into just the year, you should apply the built-in date transformation that extracts the year. This is done by selecting the Date column and using the transform path: Date ? Year (or right-click ? Transform ? Date ? Year). This replaces the date values with the year part, giving a column that contains only the year.
Why the other options aren’t ideal:

Split the column by delimiter or by number of characters would be needed only if the date were stored as text with a specific format and you manually parse out the year—more steps and more error-prone.

Extract the text after the delimiter is similarly format-specific and unnecessary if a direct Year extraction is available.

Notes:

If the column isn’t already a date type, you may need to convert to date first, then apply Year.

Düsseldorf, Germany

AI Explanation - verified by User4473 on: June 25, 2026
Question 10:

Answer: A — use a configuration profile.

Why: Delivery Optimization (DO) is a Windows 10/11 feature that you configure per device through a device configuration profile in Intune. The other options don’t map to DO settings:

- Windows Update for Business policy settings control update rings, not DO behavior. - Group Policy settings for Peer-to-Peer Networking Services are a GP method, not the Intune DO configuration path. - An Update ring for Windows 10 and later profile governs Windows Update deployment, not Delivery Optimization.

What to configure in the profile:

- Delivery Optimization mode to allow downloads from the internet and from other PCs on the local network. - Bandwidth limit set to 50%.
This ensures all enrolled devices can download updates from both internet sources and local peers, while capping the used bandwidth at 50%.
Bloomfield, United States

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 324:
Question 324: At which layer does Cisco DNA Center support REST controls?
Answer: B) northbound APIs
Why:

RESTful access to DNA Center is provided through its northbound APIs. These are the external interfaces apps or controllers use to interact with DNA Center for automation, policy, and analytics.

The session layer is an OSI concept about maintaining a communication session, not about REST controls.

EEM applets or scripts are device-level automation on Cisco IOS, not how DNA Center exposes REST controls.

YAML is just a data format for payloads; it’s not a distinct layer for REST controls.

Key idea: REST in DNA Center operates via its application-layer northbound APIs, which external systems call to manage and automate the network.
Plano, United States

AI Explanation - verified by sshuang68 on: June 29, 2026
Question 410:
Question 410 asks how to configure a new loopback and advertise it as a /24 in OSPF. The correct answer is B.
Why: By default, a loopback in OSPF is treated as a LOOPBACK network, which doesn’t form adjacencies and would advertise the loopback as a host route with a /32 mask. To advertise the loopback with the actual /24 mask, force OSPF to treat the interface as a point-to-point link and then enable OSPF on it:

interface Loopback0

ip address 172.22.2.1 255.255.255.0

ip ospf network point-to-point

ip ospf 100 area 0

This makes OSPF advertise 172.22.2.0/24 for that loopback, rather than a /32, by using the point-to-point network type on the loopback.
Plano, United States

AI Explanation - verified by User4144 on: June 23, 2026
Question 14:
Here’s how to think about Question 14.

A /30 uses 255.255.255.252. That gives 4 addresses per subnet: network, two usable hosts, and broadcast.

In any /30 (last octet block), usable hosts are only the two addresses in the middle; the first is the network, the last is the broadcast.

For the block 10.2.1.0/30 (the only option using a /30 among the choices), the addresses are:

- Network: 10.2.1.0 - Usable: 10.2.1.1 and 10.2.1.2 - Broadcast: 10.2.1.3 Therefore 10.2.1.3 (option A) is the broadcast, not usable.

Options B and C use /29 (255.255.255.248), not /30, so they don’t meet the requirement of a /30 subnet.

Option D uses 225.255.255.252 with a 209.165.201.2 address and a 225.x.x.x address is multicast (not a usable unicast interface address). So it’s also invalid for a point-to-point /30.

Conclusion:

None of the provided options give a valid usable host IP for a /30. The correct pattern would be something like 10.2.1.1/30 or 10.2.1.2/30 (within the 10.2.1.0/30 block). The stated answer (D) is not correct.

Pescara, Italy

AI Explanation - verified by bhavanaammanamanchi on: June 26, 2026
Question 11:
Yes—the given answer (A) is correct.
Why:

In Work scope, Copilot grounds its answers in your organization’s data first (via Microsoft Graph and Retrieval Augmented Generation), using only data you have permission to view.

If relevant organizational data isn’t found, it can fall back to its general knowledge (the underlying model).

It does not access data you aren’t allowed to view, and it respects permissions and tenant boundaries.

The other options misstate the data access: B implies access to all org data, C omits the general knowledge fallback, D omits organizational data entirely.

Hyderabad, India

AI Explanation - verified by User6170 on: June 15, 2026
walk through how this ties into the broader privacy program.
Here’s how Question 11’s focus on controlled access fits into a broader privacy program:

Governance and risk management

- Establish a physical security policy (including controlled access) as part of the data governance framework. - Do a data inventory to know where personal data exists on site (paper, disks, servers) and classify it.

Data lifecycle management (DLM)

- Physical access controls help protect data through its lifecycle (creation, storage, use, retention, disposal). - Align retention and destruction policies for both paper and electronic records.

Access control (both physical and logical)

- Physical: badge systems, visitor logs, locked rooms to enforce least-privilege access. - Logical: once data moves electronic, apply least-privilege access (RBAC) and separate duties.

Data protection and privacy by design

- Move toward electronic storage with strong encryption, access controls, and secure disposal of old paper records. - Use defense-in-depth: physical controls complemented by encryption and strong access management.

Compliance and incident response

- Document controls to support regulatory compliance and audit readiness. - Plan breach notification and incident response as part of the privacy program.

Training, monitoring, and third-party governance

- Educate staff on data handling and access policies. - Ensure subsidiaries follow consistent privacy controls and reporting.
In short, starting with strong physical access
Curitiba, Brazil

AI Explanation - verified by chuah.hwa on: June 23, 2026
Question 80:

Answer: C — enable limited experiences, such as blocking download of sensitive information.

Why:

- Conditional Access session controls are post-sign-in app controls (session-level) that limit what you can do inside a cloud app. They’re implemented via integration with Defender for Cloud Apps (formerly Cloud App Security). - They enable “limited experiences” in a session, e.g., blocking downloads, restricting copy/paste, or preventing printing. - This is different from sign-in controls like MFA or device/compliant-device checks, which are evaluated at sign-in, not during the session. So options like enforcing device compliance or prompting MFA are sign-in controls, not session controls.
Kuala Lumpur, Malaysia

AI Explanation - verified by User5110 on: June 23, 2026
Question 49:
Here’s a concise breakdown of Question 49.
What the policy does

Scope: Sub1

Exclusions: Sub1/RG1/VNET1 (these are excluded from the policy)

Policy: Append a tag named Tag4 with value value4 to resources

Result: Tag4 will be added to resources under Sub1 that are not in RG1 or VNET1.

Evaluate each statement

Box 1: “The Azure Policy will add Tag4 to RG1.”

- Answer: No - Why: RG1 is explicitly excluded from the policy scope, so Tag4 is not appended to RG1.

Box 2: “Tags applied to the resource group or subscription aren't inherited by the resources although you can enable inheritance with Azure Policy.”

- Answer: No (in this context) - Why: By default, tags on a parent scope (like a resource group or subscription) aren’t automatically inherited by child resources. The statement suggests inheritance can be enabled via Azure Policy, which isn’t a standard, reliable mechanism in this scenario. The policy shown simply appends Tag4 to applicable resources; it doesn’t create a true inheritance of existing tags from RG/sub to their children.

Box 3: “VNET1 is excluded from the Azure Policy so Tag4 will not be added to VNET1.”

- Answer: Yes - Why: VNET1 is listed in the exclusions, so Tag4 will not be added to it.
If you want, I can walk through how tag inheritance is handled in Azure Policy vs. direct tagging, or apply similar logic to another scenario.
Wellington, New Zealand

AI Explanation - verified by vansh.shah on: June 30, 2026
Question 30:
EOD Update — 30/06/2026 (Tuesday)

Name: Vansh Shah

Reporting Manager: Nitish Patel

Completed Today:

- Task 223996: Practice Concepts Related to DP 900 Certifications

Plan for Monday:

- Task 223997: Practice Concepts Related to DP 900 Certifications (T1)

Blockers: None

Notes (optional): I can add time spent, outcomes, or any blockers if needed.
Ahmedabad, India

AI Explanation - verified by User6244 on: June 23, 2026
Question 27:

Correct answer: AWS Budgets (B) and Amazon CloudWatch (D)

Why these meet the requirement:

AWS Budgets can create a cost budget with a threshold and send alerts (via SNS) when actual or forecasted costs exceed that threshold.

Amazon CloudWatch can monitor billing metrics published by AWS (namespace AWS/Billing, e.g., EstimatedCharges) and trigger alarms when a threshold is crossed, with notifications via SNS.

Why not the others:

SQS (A) is a messaging service, not for alerting on costs.

Cost Explorer (C) is for analyzing costs, not real-time alerts.

Cost and Usage Report (E) is a data feed for analysis, not an alert mechanism.

How to use (high level):

Budgets: Create a cost budget, set the threshold, and configure an SNS endpoint for notifications.

CloudWatch: Ensure billing metrics are enabled, create a CloudWatch alarm on AWS/Billing:EstimatedCharges, set the threshold, and attach an SNS topic for alerts.

New Delhi, India

AI Explanation - verified by User1740 on: July 07, 2026
Question 12:
The correct answer is AWS Service Catalog.

Why: It lets an organization publish and govern a catalog of IT services and infrastructure "products" for end users. Each product is typically defined by an IaC template (for example, a CloudFormation template), and you can enforce approvals, access controls, and constraints to ensure only approved configurations are deployed. This directly supports governance of deployed IT services and IaC templates.

Why not the others:

- AWS Resource Explorer: used for discovering resources across accounts, not for governance of IaC templates. - AWS Organizations: good for multi-account governance and policy management, but not for managing and governing IaC templates themselves. - AWS Systems Manager: focuses on operational management, automation, and patching, not on central governance of IaC templates.
Would you like a quick walkthrough of how to set up a simple product in Service Catalog using a CloudFormation template?
Rawalpindi, Pakistan

AI Explanation - verified by learnai102 on: June 23, 2026
Question 33:
Question 33 asks how to start indexing a local video file using the Azure Video Indexer website. The logic is: you’re starting from a local file, so the first step is to upload that file directly to Video Indexer.

Correct first step: Upload File1.avi to the Azure Video Indexer website (the option that uploads from your local computer).

Why not the others:

- Uploading to an Azure Storage queue isn’t part of the Video Indexer workflow for indexing a local file. - OneDrive can be used as a source, but it’s not the initial/most direct step when you’re at the Video Indexer website from a local file. - YouTube is not involved in the indexing workflow.
Note on the given answer: the page lists C (OneDrive) as the answer, but based on how Video Indexer typically works, B (upload from the Video Indexer website) is the correct first step when starting from a local file. If you’d like, I can walk through the exact steps in the portal.
Warsaw, Poland

AI Explanation - verified by User3515 on: July 03, 2026
Question 9:
Question 9 asks which segments can be refreshed manually via Actions. The correct choices are:

Filtered Data Extension (B)

- This is a data extension created by applying a filter. You can manually re-run the filter by using the Refresh action to update its contents.

Filtered Group (D)

- This is a group in Contact Builder defined by a filter. You can refresh the group to re-evaluate membership.
Why the others aren’t correct:

Random Group (A) isn’t typically refreshed via an Actions option; it’s a generated grouping and isn’t refreshed like a filter-based segment.

Standard Data Extension populated by a Query (C) is populated by a SQL Query (via Automation). It isn’t refreshed via a simple Actions menu; you re-run the query/automation to update it.

In short, both Filtered Data Extensions and Filtered Groups support manual refresh to update their membership.
Pune, India

AI Explanation - verified by User6895 on: June 24, 2026
Question 41:
Pregunta 41 pregunta qué servicio de Azure puede usar el modelo preconstruido de recibos en Azure AI Document Intelligence.
Respuesta y explicación:

Respuesta correcta: Azure AI Foundry (A).

Por qué: Los modelos preconstruidos de Azure AI Document Intelligence (como el de Recibos) son accesibles e integrados dentro del portal de Azure AI Foundry. Desde Foundry, puedes usar el tile “Vision + Document”, seleccionar el modelo “Receipts” y ejecutar el análisis sobre una imagen de recibo para extraer datos como el nombre del comerciante, fechas y artículos.

Cómo funciona en la práctica:

1) Abre el portal de Azure AI Foundry. 2) Haz clic en Vision + Document. 3) Elige Receipts (modelo preconstruido). 4) Sube una imagen de recibo y ejecuta el análisis. 5) Obtén datos extraídos (p. ej., merchant name, date, line items).
Por qué las otras opciones no son correctas:

Azure Machine Learning: orientado a entrenamiento y despliegue de modelos personalizados, no específicamente a usar modelos preconstruidos de documentos.

Azure AI Vision: enfocado en análisis de imágenes generales, no específicamente en la extracción estructurada de recibos mediante un modelo preconstruido.

Azure AI Custom Vision: para clasificación/detección de imágenes con entrenamiento personalizado; no proporciona el modelo de recibos preconstruido de Document Intelligence.

Madrid, Spain

AI Explanation - verified by User9846 on: June 24, 2026
Question 20:
Answer: A (Dynamic Delivery)

Why this fits: The goal is faster message delivery while still scanning attachments for malware. Dynamic Delivery delivers the email immediately with a placeholder for attachments, while the attachments are scanned in the background.

How it works with security: If malware is found during the background scan, the policy can block the attachment (per Defender for Office 365 Safe Attachments rules). This preserves security without delaying initial delivery.

How it compares to other modes:

- Block: delays delivery until scanning completes (higher latency). - Replace: replaces attachments with a placeholder or warning, which can still impact user experience and doesn’t optimize initial delivery as well as Dynamic Delivery.

Where to configure: In Defender for Office 365 Safe Attachments policy, set the Delivery mode to Dynamic Delivery.

Medellín, Colombia

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 350:
Question 350 explanation:

Correct answer: A —

return (json.dumps({d['hostname']: d['serialNumber'] for d in json.loads(test_json)['response']}))

Why: test_json is presumably a JSON string with a structure like {"response": [ {"hostname": "...", "serialNumber": "..."}, ... ]}. The expression:

- json.loads(test_json)['response'] yields a list of dicts. - The dict comprehension builds a mapping: hostname -> serialNumber. - json.dumps(...) converts that mapping to a JSON string, which matches the requested output.

Why the others are not correct:

- B uses an invalid dict comprehension syntax. - C incorrectly applies json.loads to a value produced by json.dumps, and mixes types; it also references json.dumps(test_json)['response'], which is not valid. - D is invalid syntax for a dict comprehension and also misuses json.loads/json.dumps.

Quick example:

- test_json = '{"response":[{"hostname":"cat_9k","serialNumber":"FXS1932Q2SE"}]}' - return json.dumps({d['hostname']: d['serialNumber'] for d in json.loads(test_json)['response']}) - Result: '{"cat_9k":"FXS1932Q2SE"}'
If you want, paste the exact exhibit text and I’ll tailor the reasoning.
Plano, United States

AI Explanation - verified by Kavya.Haglur on: June 25, 2026
Question 10:
Question 10 explains how a new user is placed in SharePoint Site1.

The missing fill is that User1 becomes “a member of Site1” (i.e., a site member with rights on Site1).

Why: When a new internal user is created, they’re automatically added to the tenant group “Everyone except external users.”

The group has Edit permissions on Site1, so the new user inherits those rights immediately without any manual invitation.

Access method: User1 can reach Site1 via its URL right away.

Key points to remember:

Automatic group membership applies to new internal users.

Inherited permissions from the group grant site access without individual invites.

This behavior assumes Site1 uses the default permission model (not a unique-permissions site).

Caution: If Site1 were configured with unique permissions or if external-sharing settings differ, the outcome could change. If you want, I can walk through the other questions too.
Bengaluru, India

AI Explanation - verified by User6367 on: June 12, 2026
Question 31:
The correct choice is a table projection.

Why: When you want to analyze data in Power BI, you need a tabular (rows/columns) representation. In a Cognitive Search knowledge store, projections shape how content is stored and exposed. A table projection creates a schema of columns/rows from the enrichment output, which is ideal for BI tools.

Contrast with other options:

- Object projection would put the entire enrichment result into one JSON document, which isn’t convenient for Power BI. - File projection is for storing binary files, not tabular data. - Projection group isn’t needed here.

Quick note: Form Recognizer outputs structured JSON; using a table projection (with optional shaping) maps that data into a grid suitable for analysis without extra development. If you want, I can outline steps to configure the table projection and connect to Power BI.

West Linn, United States

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 348:
Question 348 explanation:

Correct answer: B — Create an XML filter as a string and pass it to the get_config() method as an argument.

Why: NETCONF responses are XML. To reduce data sent over the network, you filter at the request time by providing an XML filter (typically a subtree filter) to get_config(). This tells the server to return only the interface’s configuration.

Why the others are not correct:

- A: Using the Ixml library to parse after retrieval does not reduce the amount of data transferred; it only processes what you already got. - C: A JSON filter is not applicable to NETCONF, which returns XML; filters must be XML. - D: Using the JSON library to parse after retrieval also doesn’t reduce data transfer.

Quick example (conceptual):

- filter_xml = '''<interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces"><interface><name>Gig0/1</name></interface></interfaces>''' - m.get_config(source='running', filter=('subtree', filter_xml))
If you want, paste the exact exhibit text and I can map the reasoning more precisely.
Plano, United States

AI Explanation - verified by User8061 on: June 18, 2026
how to pass the exam
Here’s a focused plan to help you pass the exam.

Know the objectives: map your study to the main domains like data preparation, data modeling, data visualization, DAX, data governance/deployment, and security in the Power BI context. Use the official PL-300 (Power BI Data Analyst) objectives as your checklist.

Hands-on practice: build end-to-end Power BI projects with real data. Focus on creating models, relationships, measures, and visuals that solve concrete business questions.

Storage modes mastery: understand when to use Import, DirectQuery, and Dual. Know how each affects refresh, performance, and caching, and how to meet refresh requirements.

Power Query techniques: learn Append Queries vs Merge, and know how to use Disable Load for intermediate steps to optimize the model.

Connectors and sources: get comfortable with common sources (Excel/SharePoint, SQL, Dataverse, Teams) and their implications for refresh and modeling.

Exam strategy: read questions carefully, eliminate clearly wrong options, manage time, and mark uncertain items to revisit.

Resources: use official Microsoft Learn modules for PL-300, read docs on storage modes and Power Query operations, and practice with real datasets.

If you
Basildon, United Kingdom

AI Explanation - verified by User9195 on: June 14, 2026
Question 45:
Question 45 asks for a targeted way to let sales directors edit opportunity fields only when the stage is Negotiation/Review, while sales reps cannot edit at that stage.

Correct answer: C

Why the others are not suitable:

A: Workflow cannot grant or revoke field-level editing rights. It automates records, not permissions.

B: Field-level security is set per profile/permission set and isn’t dynamically driven by a record’s stage.

D: Using Modify All on the Opportunity object is overly broad and bypasses security/sharing controls.

Why C fits:

A validation rule can enforce access based on the record’s stage and a user-specific permission. Create a custom permission (e.g., Edit_Opportunity_Fields_During_NegReview) and assign it to the sales directors. The validation rule would block edits to the targeted fields when StageName = 'Negotiation/Review' unless the user has the custom permission. Directors would have the permission to edit at that stage, while reps would be blocked.

Implementation outline:

Create a Custom Permission (e.g., Edit_Opportunity_Fields_During_NegReview).

Create a Validation Rule on Opportunity that triggers when StageName = 'Negotiation/Review' AND NOT $Permission.Edit_Opportunity_Fields_During_NegReview.

Assign the permission to the Sales Directors (via a permission set or direct profile).

Bengaluru, India

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 325:
Question 325: Which algorithms are used to secure REST API from brute attacks and minimize the impact?
Answer: D) PBKDF2, BCrypt, and SCrypt
Why:

These are password hashing / key-derivation algorithms designed to be slow and salted, which dramatically lowers the success rate of brute-force and rainbow-table attacks.

PBKDF2 uses a hash function with a configurable number of iterations and a salt.

BCrypt uses Blowfish with a cost factor and built-in salt.

SCrypt adds memory-hardness to resist GPU/ASIC cracking.

Why the others are less suitable:

A (SHA-512 and SHA-384): fast hashes; no inherent salting or work factor, making brute-force easier.

B (MD5 and SHA-384): MD5 is insecure; even with SHA-384, these are not designed for password hashing.

C (SHA-1, SHA-256, and SHA-512): hashing without salt or work factor; vulnerable to brute-force and precomputed attacks.

Key idea: Use slow, salted, memory-aware hashing (PBKDF2, BCrypt, SCrypt) to protect credentials or derived keys in REST API authentication workflows.
Plano, United States

AI Explanation - verified by User5142 on: July 07, 2026
Question 28:
Question 28 explanation:

Correct answer: C

Why: The issue is browser-side cross-origin restrictions. The three subsidiary apps load common assets (JavaScript and web fonts) from a central S3 bucket that has a different origin than the apps. Browsers enforce CORS, so you must configure the central bucket to allow cross-origin requests from the subsidiary domains. Adding a CORS configuration on the central bucket enables the browser to fetch those assets.

Why the other options are not appropriate:

- A: Access Points are for specialized access paths within VPCs or accounts, not for solving cross-origin resource sharing in browsers. - B: A bucket policy controls server-side access, not the browser’s cross-origin headers. It won’t fix CORS from the client. - D: Content-MD5 is for data integrity, not for cross-origin access.

What to configure (high level):

- In the central S3 bucket, set a CORS configuration that allows the subsidiary domains (Origins) to access resources. - Include allowed methods like GET, HEAD, and OPTIONS (for preflight), AllowedHeaders (often *), and optionally ExposeHeaders as needed. - Example gist: allow origins such as https://www.example.com, https://subsidiary1.example.com, etc., with GET, HEAD, OPTIONS.
This e
Kolkata, India

AI Explanation - verified by User1253 on: July 06, 2026
Question 8:
Question 8 asks which rollout strategy best minimizes business downtime when implementing a month-end processing system.
Key options:

Cutover (big bang): switch from old to new in one go; typically causes significant downtime during the switch.

Phased: roll out in stages; downtime is reduced per phase but the total deployment may take longer and complicates integration.

Pilot: deploy to a limited area first; reduces risk but not necessarily the widest downtime impact.

Parallel: run old and new systems side by side for a period; downtime is minimized because business operations can continue on the old system while the new is tested and reconciled.

Why Parallel is best here:

It allows continuous operation during the transition (no single cutover downtime).

Problems can be resolved without halting business processes.

Data reconciliation can occur while both systems run.

Trade-offs: higher cost and effort to maintain two systems temporarily.
Answer: D: Parallel.
Kolkata, India

AI Explanation - verified by User9195 on: June 14, 2026
Question 17:
Question 17 focuses on preventing pipeline and forecast distortion when reps create opportunities after they’re closed/won.
Key points:

Problem: Opportunities created in or after the closed/won stage inflate forecasts and mislead pipeline reports.

Correct solutions:

- A: Create a report that displays opportunities where the closed date is less than or equal to the created date. This flags data-quality issues where an opportunity was created after it should have closed. - C: Use a workflow rule to email sales management when an opportunity is created in the closed/won stage. This provides an immediate alert to governance when improper records are created.

Why not:

- B: Automatically updating to the first stage disguises the issue and can corrupt the sales process; it doesn’t prevent the root problem. - D: Running the pipeline report is a monitoring activity, not a preventive or corrective measure.
Answer: A and C.
Bengaluru, India

AI Explanation - verified by User9195 on: June 14, 2026
Question 25:
Question 25 — Correct answer: D

D states: Campaigns in which a contact became a member within the last 60 days will be associated and displayed in Campaigns with Influenced Opportunities Report.

- Why: The influence timeframe (60 days) defines the window in which a contact’s campaign membership can influence an Opportunity. Only campaigns where the contact joined within that window will be linked to the opportunity and appear in the Influenced Opportunities report.
Why the others are not correct:

A: Influence is not based on campaigns created in the last 60 days, but on membership dates within the timeframe.

B: Reps don’t manually select campaigns within the window to influence; the system automatically associates campaigns that meet the timeframe.

C: It’s not about all contacts with campaigns; it’s about campaigns where the contact became a member within the 60-day window.

Bengaluru, India

AI Explanation - verified by User2231 on: June 18, 2026
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements. You have been informed by your superiors of the company’s intentions to automate server deployment to Azure. There is, however, some concern that administrative credentials could be uncovered during this process. You are required to make sure that during the deployment, the administrative credentials are encrypted using a suitable Azure solution. Solution: You recommend the use of Azure Multi-Factor Authentication (MFA). Does the solution meet the goal?
No. MFA does not meet the goal.

MFA is for authenticating users, not for encrypting or securely managing credentials used during deployment.

To protect admin credentials in automation, use Azure Key Vault to securely store secrets, and configure the deployment process to fetch secrets at runtime (e.g., via a managed identity or service principal). Consider using Managed Identities to avoid embedding credentials, and optionally Azure AD Privileged Identity Management for just-in-time access.

Jabalpur, India

AI Explanation - verified by raman.thulasi71 on: June 24, 2026
Question 199:
The correct answer is B: NAT gateway.
Why:

A NAT gateway enables instances in a private subnet to reach the Internet (for updates, downloads, etc.) while preventing inbound Internet traffic from directly reaching those instances.

It sits in a public subnet and uses an Elastic IP to perform outbound connections on behalf of the private subnet.

Why the other options don’t fit:

VPC endpoint: provides private access to AWS services (like S3/D DynamoDB) without Internet, not general Internet access.

AWS PrivateLink: private connectivity to specific services, not general Internet access for OS updates.

VPC peering: connects two VPCs, not Internet access from a private subnet.

So, for outbound Internet access from a private subnet with inbound Internet traffic blocked, use a NAT gateway.
Chennai, India

AI Explanation - verified by User6156 on: July 06, 2026
No. based on the manual provided by comptia, OSI model is under establish a theory
You're right: in the CompTIA material you’re using, OSI-layer considerations are described as part of the Establish a theory step.
Here’s a revised walkthrough aligned with that approach:

1) Identify the problem

- Define symptoms, scope, and impact. Gather facts from users, logs, and monitoring tools.

2) Establish a theory

- Develop probable causes using OSI layers (L1, L2, L3, L4). Examples: - L1: faulty cabling or interface down - L2: VLAN misassignment or trunk issues - L3: missing/routing misconfig to the server subnet - L4: ACLs or port security blocking traffic

3) Test the theory

- Collect data to confirm/refute each theory with cross-layer checks: - show interfaces, show mac-address-table, show ip route - ping, traceroute, DNS tests, etc.

4) Create a plan of action

- Outline concrete steps to fix the root cause with rollback options.

5) Implement the solution

- Apply changes, replace faulty components, and monitor impact.

6) Verify functionality

- End-to-end testing across relevant OSI layers to confirm service delivery.

7) Document

- Record root cause, changes, test results, and recommendations.
If you want, tell me a scenario and I’ll map
Pasay, Philippines

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 294:
Question 294: The scenario describes guest users on the same guest WLAN being able to reach each other. The fix is to prevent client-to-client traffic on that WLAN.

Correct answer: A) implement P2P blocking

Why: P2P blocking (often called client isolation) stops peer-to-peer and direct client-to-client traffic at the WLAN level. This keeps each guest device from seeing or talking to other guest devices on the same SSID.
Why the other options aren’t suitable here:

MFP client protection: protects against certain client threats, not client isolation.

Wi-Fi Direct policy: related to devices connecting via Wi-Fi Direct, not typical guest WLAN isolation.

Split tunneling: used with VPNs to choose which traffic goes through the VPN, not for isolating devices on a WLAN.

If you want, I can walk through how to enable P2P blocking on a specific Cisco wireless controller version.
Plano, United States

AI Explanation - verified by User7105 on: June 25, 2026
Question 9:
Question 9:

Answer: B and C

Why B works:

- Input JSON path as List(Contact) treats the input as an array of Contact objects. OutputJSON Path as Contact maps that array into the output under the Contact node, producing a JSON structure that contains the list of contacts.

Why C works:

- Input JSON Path as Contact (the container of the items) and Output JSON Path as contact with Output Data type as List creates a JSON array under the output path, aligning with the goal of producing a JSON array of contacts.

Why A might be less direct:

- Using a formula LIST(Contact) adds a separate calculation step; while possible, it introduces extra configuration and may not map cleanly to the required output structure in Transform.

Why D is unlikely:

- Output Path as List(Contact) isn’t a standard path form for DataRaptor Transform mapping and would not correctly create the desired array in the output.
Lucknow, India

AI Explanation - verified by User1740 on: July 07, 2026
Question 6:
Correct answer: Governance

The AWS Cloud Adoption Framework (CAF) defines six perspectives: Business, People, Governance, Platform, Security, and Operations.

Among the options, only Governance is one of these CAF perspectives.

Governance focus: decision rights, policies/standards, risk management, oversight, budgeting, and architecture governance to guide cloud adoption.

Why the others aren’t CAF perspectives here:

- Sustainability is not a CAF perspective. - Performance efficiency and Reliability are pillars of the AWS Well-Architected Framework, not CAF perspectives.
Rawalpindi, Pakistan

AI Explanation - verified by User2971 on: June 26, 2026
Question 49:

Correct answer: C — It holds a comprehensive database that tracks endpoints and networks in the fabric.

Why:

The Fabric Control Plane Node (FCPN) is the central control-plane component that maintains the Fabric Database, which records endpoints (identities, locations) and the networks/segments they belong to.

This database enables centralized visibility and policy decisions across the SD-Access fabric.

It is not primarily responsible for data-plane tasks like traffic encapsulation or enforcing security profiles on encapsulated traffic (those are data-plane functions handled by fabric nodes). Nor is its main role integration with legacy environments—that’s typically handled by border/edge components.

So, the most precise description is that the FCPN maintains the endpoint and network inventory within the fabric.

Plano, United States

AI Explanation - verified by User8662 on: June 15, 2026
What is a Voting model in AutoML

A Voting model in AutoML is an ensemble that combines predictions from multiple trained models to produce a final prediction.

Types:

- Hard voting: uses the majority class label among the base models. - Soft voting: averages the predicted class probabilities from the base models and picks the class with the highest average probability. - For regression, it typically averages the predictions from the base models.

Why use it: leverages diversity among models to improve accuracy and robustness by reducing bias/variance.

When to use: when several models have complementary strengths and you want a more stable, better-performing predictor.

Forest Hill, United Kingdom

AI Explanation - verified by User1740 on: July 07, 2026
Question 72:
Question 72 asks for a service to rotate database user credentials with the least operational overhead.

Correct answer: B) AWS Secrets Manager

Why:

AWS Secrets Manager is designed to securely store and rotate secrets, including database credentials.

It supports automatic rotation for many databases (e.g., RDS) with built-in templates, reducing manual automation work.

This minimizes operational overhead because you don’t have to build and maintain your own rotation logic.

Why the others are less suitable:

AWS Systems Manager: can store credentials, but rotation typically requires custom automation and scripting, leading to more overhead.

AWS License Manager: not related to credential rotation.

AWS Managed Services: helps operate your environment but isn’t a built-in solution for rotating database credentials.

Rawalpindi, Pakistan

AI Explanation - verified by raushankumar6343 on: June 27, 2026
Question 57:

Correct answer: B and D

Why: To authenticate to the Speech service with an Azure AD (Entra) token, the service must be exposed via a custom subdomain and be reachable over a private endpoint. The Speech service uses custom subdomains with private endpoints for AAD-token authentication.

What the two actions mean:

- Configure a custom subdomain: Sets up a dedicated, recognized domain for the Speech resource to issue and validate AAD tokens. - Create a private endpoint: Enables private network connectivity to the Speech resource, allowing token-based access to stay within your network.

Why the other options aren’t correct here:

- Enable a virtual network service endpoint: not required for AAD token authentication. - Request an X.509 certificate: not needed for AAD token-based auth (certs are not the mechanism here). - Create a Conditional Access policy: not a direct requirement to obtain or use the token in this scenario.
Kolkata, India

AI Explanation - verified by User3321 on: June 23, 2026
Question 5:
Question 5: CCTV surveillance issues in a data center.
Answer: A
Explanation:

The main risk is that CCTV recordings are not regularly reviewed. If footage isn’t examined, the control loses its effectiveness for detecting incidents, verifying security events, or supporting investigations.

Why the others are weaker:

- B (records deleted after one year) is a policy issue, but not reviewing footage is a more fundamental failure to use the control. - C (not recorded 24x7) reduces coverage, but if reviews are still performed on what is recorded, gaps exist; however, lack of regular review is the broader, more critical risk. - D (not installed in break rooms) is not typically a core data-center risk.

Practical audit steps:

- Verify there is a written policy specifying review frequency and responsible owner. - Check for a documented review log and sign-off that footage was checked. - Assess retention periods and ensure footage is protected from tampering and accessible for investigations. - Confirm camera coverage includes critical areas (entrances, data halls, server rooms) and that access to storage is restricted.
In short, regular review of CCTV footage is essential to make surveillance an effective control.
Washington, United States

AI Explanation - verified by User9195 on: June 13, 2026
can we add customers who are not salesforce internal users to a salesforce chatter group
Short answer: Yes, but only if the external customers are added as Community (Experience Cloud) users. You cannot add non-Salesforce-internal users directly to a standard Chatter Group.
How to do it at a high level:

Enable Experience Cloud (Customer Community) and create community licenses for your customers.

Grant those community users permission to access Chatter and the relevant Group.

Create a Chatter Group (private or public as needed) and add the community users to the group.

Ensure data access is appropriate (profile/permission sets, sharing rules) so customers can view the intended content.

If you don’t want to set up a community, external users won’t be able to join Chatter Groups directly. Consider alternatives (e.g., published documents, external portals) only if suitable for your security model.
Bengaluru, India

AI Explanation - verified by User9647 on: June 30, 2026
Question 114:
Question 114 asks: You’re using the AWS Cloud Adoption Framework (CAF) perspectives to identify capability gaps. Which phase of the cloud transformation journey includes these identification activities?

Correct answer: Align (B)

Why:

The CAF helps assess capability gaps across perspectives like Business, People, Governance, Platform, Security, and Operations.

In the AWS CAF-based journey, the Envision phase focuses on articulating outcomes, value, and high-level planning, while the Align phase is where you compare current-state to target-state across CAF perspectives to identify gaps and priorities. This gap analysis then informs the migration plan.

The later phases (Scale, Launch) focus on execution and operation, not initial gap identification.

So, identifying capability gaps using CAF perspectives is a task you perform in the Align phase.
Hyderabad, India

AI Explanation - verified by petrakenesey on: June 23, 2026
Question 35:

Correct answer: D

Why: In Check Point, a VPN Gateway can participate in multiple VPN communities as long as all gateways involved are managed by the same Security Management Server. This ensures the management database can coordinate policies, encryption domains, and tunnel configurations consistently across all communities. If gateways are managed by different Security Management servers, coordinating multiple communities becomes complex or unsupported.

Quick contrasts:

- A) No — not true; gateways can be in more than one community. - B) Modifying vpn_route.conf on each gateway is not the standard, centralized way to enable multi-community participation. - C) The ability isn’t limited by “doesn’t pair with another gateway” but by whether the gateways share the same management server.
Budapest, Hungary

AI Explanation - verified by User9430 on: June 26, 2026
next questions please
I can’t generate new practice questions here, but I can walk through the questions on this page and explain the answers. For more questions with verified answers, the premium/full version offers the full question bank.
Here’s a quick review of 65–72 with corrected notes where needed:

Q65: Which type of interface enables you to display multiple performance analytics, reporting and other widgets on a single screen?

- Answer: Dashboard. Why: dashboards host multiple widgets and analytics on one screen.

Q66: What are the three components of a filter condition?

- Answer: Field, Operator, Value. (Table is not part of the 3 core components.)

Q67: Configuration will not affect what others see on their forms.

- Answer: False. Config changes can affect all users who view that form.

Q68: What displays a set of records from a table?

- Answer: List. A list shows multiple records from a table.

Q69: A User is stored in which table?

- Answer: sys_user.

Q70: A group is stored in which table?

- Answer: sys_user_group.

Q71: What are the 6 methods available for user authentication?

- Answer: Local, Multifactor, LDAP, SAML 2.0, OAuth 2.0, Digest Token (all six).

Q72: A role is recorded in which table?

- Page shows: Role[sys_user], but the correct table is sys_user_role.
If you want, tell me which question you want explained in more detail
Sacramento, United States

AI Explanation - verified by User9195 on: June 14, 2026
Question 50:
Question 50 explanation:

Correct answer: A

Why A works:

- You need to compare how healthcare leads convert versus other industries as volume grows. A report on lead lifetime by industry lets you see counts of leads and conversions grouped by industry over time, so you can compute and compare conversion ratios across industries and as lead creation increases.

Why the other options are less suitable:

- B Industry performance dashboard: useful for visuals, but a dashboard alone isn’t as precise for analyzing lifetime conversion rates by industry; you’d still need underlying reports to drill into the data. - C Report on leads by source: focuses on lead sources, not industry-level conversion performance. - D Campaign dashboard by industry: focuses on campaigns, not the core lead conversion metric by industry.

Quick tip to implement:

- Create a leads report grouped by Industry, include fields for CreatedDate and ConvertedDate or a converted flag, and optionally add a formula to compute conversion rate (Converted leads / Total leads) by industry. Use this to compare healthcare against other industries as volume changes.
Bengaluru, India

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 269:

The correct component is the Cisco Stealthwatch system.

Why:

Stealthwatch provides network visibility and security analytics by collecting and analyzing flow data (NetFlow/IPFIX) across the network.

It can map flows to user identities and devices (user and flow context), enabling context-aware threat detection and behavior analytics.

Other CTD components serve different roles: Firepower for firewall/threat prevention, AMP for endpoint protection, and WSA for web security; none of these are primarily focused on user/flow context analysis like Stealthwatch.

Plano, United States

AI Explanation - verified by User7515 on: June 21, 2026
Question 37:
Question 37 asks how to provide additional safeguards for encrypted data at ALBs by using a unique random session key. The correct approach is to ensure forward secrecy (FS) in TLS.
Why the right answer is D:

Forward secrecy means the session keys are generated using ephemeral keys (e.g., ECDHE/DHE) during the TLS handshake, so they aren’t derived from the server’s long-term private key. This protects past sessions if the private key is compromised later.

Changing the ALB policy to a FS-enabled policy ensures the TLS handshake uses ephemeral keys.

Why the other options are not correct:

A: Simply requiring TLS 1.2 does not guarantee forward secrecy, as TLS 1.2 can use non-ephemeral (RSA) key exchanges depending on the cipher suite.

B: AWS KMS cannot be used to manage or encrypt per-session TLS session keys on an ALB.

C: WAF cannot enforce forward secrecy in TLS handshakes; FS is negotiated during TLS, not something WAF enforces.

How to implement (high level):

In the ALB/or listener settings, choose a security policy that supports forward secrecy (FS-enabled cipher suites, e.g., ECDHE-based suites).

If your environment supports TLS 1.3, that inherently provides FS as well.

Madrid, Spain

AI Explanation - verified by User7120 on: July 07, 2026
Question 1:
Question 1 asks how to configure items so they can be set as either company-owned or consignment when the item is created.
What the options mean and why they matter:

Enable the Owner dimension (option B): This introduces an ownership attribute for inventory. By turning on Owner, you can assign stock to “Company” or “Vendor/Consignment” ownership, which is exactly how you distinguish company-owned from consignment items in D365.

Enable the Batch dimension (option A): Batch tracking is for lot/batch numbering, not ownership. It doesn’t help you model ownership (consignment vs. company-owned), so it’s not required for this objective.

Costing model choices (options C and D): The costing method (e.g., Moving average vs. Standard costing) is a separate setting from ownership. You can choose either method depending on your cost policy; however, the question’s objective is about ownership configuration, not cost valuation.

Reason the stated answer makes sense: B is clearly needed to model ownership. D is presented as the chosen costing model to accompany ownership in this scenario; the costing method is a separate decision, but standard costing is a common choice for stable valuation.
If you want, I can walk through how to enable the Owner dimension in the item setup.
Chennai, India

AI Explanation - verified by User4394 on: June 16, 2026
Question 3:
Question 3 asks which filter option to use on a Cortex XSIAM dashboard widget when you want data filtered by more than one dynamic value.

Answer: B — Multi-select.

Why: The Multi-select filter lets you choose multiple dynamic values for a widget, enabling the visualization to show data that matches any or all of those selected values (depending on the widget’s configuration). This is essential when you want to explore data across multiple criteria at once.
What the other options do:

Free text/number: filters by arbitrary text or numeric input, not constrained to predefined dynamic values.

Fixed filter: filters by a single, fixed value.

Single-select: filters by only one dynamic value at a time.

Example: If you want a widget to show events from multiple hosts (hostA, hostB, hostC), use Multi-select to select all three hosts.
Hyderabad, India

What the API-936 Exam Tests and How to Pass It

The API-936 Refractory Personnel certification is designed for professionals who work in the petrochemical and refining industries, specifically those involved in the installation, inspection, and testing of refractory linings. This certification validates that an individual possesses the necessary knowledge to ensure that refractory systems are installed and maintained according to industry standards, which is critical for the safety and operational efficiency of high-temperature processing equipment. Employers in the oil and gas sector often require this certification to ensure that personnel can effectively manage the quality control aspects of refractory work. By holding this credential, professionals demonstrate a commitment to industry best practices and a deep understanding of the technical requirements necessary to prevent equipment failure and extend the lifespan of critical infrastructure. It serves as a benchmark for competence in a specialized field where precision and adherence to established protocols are paramount.

What the API-936 Exam Covers

The API-936 certification exam evaluates a candidate's proficiency across several core domains that are essential for successful refractory management. Candidates must demonstrate a solid grasp of Laboratory Testing Procedures, which involves understanding how materials are analyzed before they are approved for use in industrial settings. The exam also tests knowledge regarding Applicator and Material Qualification, ensuring that the personnel and the materials themselves meet the rigorous standards required for high-heat environments. Furthermore, the exam covers the critical phases of Installation, Inspection, and Post-Installation, requiring candidates to understand the entire lifecycle of a refractory lining project. Our practice questions are structured to reflect these specific domains, allowing you to test your knowledge against the actual technical requirements you will face during the certification exam. By engaging with these practice questions, you can identify which areas require further study and ensure you are fully prepared for the breadth of the exam content.

Among these domains, the Installation and Inspection phases are often considered the most technically demanding because they require the application of theoretical knowledge to real-world scenarios. Candidates must understand not only the standards but also the practical implications of improper installation techniques or missed inspection steps. This requires a deep familiarity with the nuances of refractory materials and the specific conditions under which they must perform. Mastery of these sections is essential, as they form the backbone of the quality assurance process that the API-936 certification aims to uphold.

Are These Real API-936 Exam Questions?

The practice questions available on our platform are sourced and verified by the community, consisting of IT professionals and industry experts who have recently sat for the actual API certification exam. Because these questions are community-verified, they provide a reliable representation of the concepts and question styles you will encounter on test day. Our questions reflect what appears on the real exam because they are sourced from the community, ensuring that the material remains relevant to the current exam objectives. If you have been searching for API-936 exam dumps or braindump files, our community-verified practice questions offer something more valuable, as each question is verified and explained by professionals who recently passed the exam. We prioritize accuracy and educational value over simple memorization, ensuring that you are learning the material rather than just trying to recall specific patterns.

Community verification works through a collaborative process where users actively discuss answer choices, flag potentially incorrect information, and share context based on their recent exam experiences. This feedback loop allows our platform to maintain high standards of accuracy, as peers help one another clarify complex topics and correct misunderstandings. When you engage with these questions, you are benefiting from the collective knowledge of others who have successfully navigated the certification process. This collaborative approach makes our practice questions a highly effective tool for your exam preparation, providing insights that static study guides often lack.

How to Prepare for the API-936 Exam

Effective exam preparation for the API-936 certification requires a disciplined approach that goes beyond rote memorization of facts. We recommend that you combine hands-on experience in the field with a thorough review of official API documentation to ensure you understand the underlying concepts of refractory management. Building a consistent study schedule is vital, as it allows you to break down the complex topics into manageable segments over time. Every practice question includes a free AI Tutor explanation that breaks down the reasoning behind the correct answer, so you understand the concept, not just the answer. This AI Tutor feature is designed to help you think through the logic required for each question, which is a critical skill for passing the certification exam.

A common mistake candidates make is relying solely on memorizing answers to practice questions without understanding the technical principles behind them. The API-936 exam often features scenario-based questions that require you to apply your knowledge to specific, real-world situations rather than simply recalling definitions. To avoid this pitfall, focus on understanding the "why" behind each standard and procedure, and use your study time to practice applying these rules to different installation or inspection scenarios. Effective time management during your study sessions will also help you build the stamina needed for the actual exam environment.

What to Expect on Exam Day

On the day of your API-936 exam, you should be prepared for a rigorous assessment that typically consists of multiple-choice questions designed to test your technical knowledge and application skills. The exam is administered in a professional testing environment, often through a provider like Pearson VUE, where security protocols are strictly enforced to maintain the integrity of the certification. You will be given a set amount of time to complete the exam, and it is important to pace yourself carefully to ensure you have enough time to review each question thoroughly. The questions are crafted to evaluate your ability to make sound decisions based on industry standards, so read each prompt carefully to identify the specific constraints or conditions provided. Familiarity with the exam interface and the types of questions you will face can significantly reduce test anxiety and help you focus on demonstrating your competence.

Who Should Use These API-936 Practice Questions

These practice questions are intended for refractory personnel, inspectors, and quality control professionals who are seeking to validate their expertise through the API-936 certification exam. Whether you are an experienced technician looking to formalize your skills or a professional aiming to advance your career in the petrochemical industry, this certification is a recognized standard of excellence. Proper exam preparation is essential for anyone looking to achieve this credential, as it requires a high level of technical proficiency and attention to detail. By using our platform, you are taking a proactive step toward mastering the material and increasing your chances of success on the certification exam. We provide the tools you need to build confidence and ensure you are ready to perform at your best.

To get the most out of these practice questions, do not simply read the correct answer and move on to the next item. Instead, engage deeply with the AI Tutor explanation, read the community discussions to see how others approached the problem, and actively flag any questions you answered incorrectly so you can revisit them later. This iterative process of testing, reviewing, and refining your understanding is the most effective way to prepare for the challenges of the actual exam. Browse the questions above and use the community discussions and AI Tutor to build real exam confidence.

AI Tutor 👋 I’m here to help!

API API-936 Exam Actual Questions Refractory Personnel (Page 3 )

QUESTION: 6

QUESTION: 7

QUESTION: 8

QUESTION: 9

QUESTION: 10

What the API-936 Exam Tests and How to Pass It

What the API-936 Exam Covers

Are These Real API-936 Exam Questions?

How to Prepare for the API-936 Exam

What to Expect on Exam Day

Who Should Use These API-936 Practice Questions

API API-936 Exam Actual Questions
Refractory Personnel (Page 3 )