Avaya 78201X Exam Prep
Avaya IP Office Platform Support Certified (Page 2 )

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Internal interface ? connected toward the corporate network/internal firewall
• External interface ? connected toward the Internet-facing firewall

1. A route for the internal corporate network through the internal-facing interface/firewall.
2. A default route (0.0.0.0/0) through the Internet-facing interface/firewall.

• ARP poisoning: Redirects or intercepts local network traffic; it would more likely affect communication paths or cause man-in-the-middle behavior.
• Jamming: Interferes with wireless signals. The scenario does not indicate a wireless outage.
• Kerberoasting: Attempts to obtain service-account password hashes from Kerberos; it is a credential attack, not typically a direct service outage.

• Restrict a port to a defined number of MAC addresses
• Use statically configured or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious traffic but is not the primary control for switch-port MAC limits.
• NGFW: Filters routed network traffic, not the switch’s CAM/MAC address table directly.

• Employees can work from any location, including remote sites and offices worldwide.
• Login can be relatively seamless after the device is registered.
• It does not require distributing additional physical authentication equipment.

• Geotagging: Identifies location, but location alone is not a strong authentication method and may prevent legitimate remote access.
• Smart cards: Provide strong authentication but require card readers and physical cards, increasing equipment and management requirements.
• Time-based logins: Typically involve one-time codes that users must enter, making the experience less seamless and potentially requiring a token or authenticator app.

• Accept: Acknowledges the risk without taking additional action.
• Transfer: Shifts the risk or financial impact to another party, such as an insurer.
• Mitigate: Reduces the likelihood or impact through controls like patching, MFA, or segmentation.
• Avoid: Eliminates the activity that creates the risk.

• Encryption to preserve confidentiality
• Integrity protection to detect alteration
• Authentication of the server through certificates

• SHA-256: A hashing algorithm; it does not encrypt data for transmission.
• SSL 3.0: Obsolete and insecure. It should not be used.
• AES-256: A strong encryption algorithm, but by itself it does not provide the complete secure communication protocol needed for data in transit.

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

• Third-party enterprise application with embedded AI: The provider manages most security controls. The customer mainly manages users, data, and configuration.
• Application using an existing third-party FM: The customer controls the application and its inputs/outputs, but the provider controls the underlying model and infrastructure.
• Fine-tuning a third-party FM: The customer has additional responsibility for training data, data protection, and model behavior, but still depends on the provider’s base model and platform.
• Building and training a model from scratch: The customer controls the model, training data, application, deployment, and many security safeguards. This creates the greatest security ownership.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

• Valor maior: mais aderência às instruções e aos detalhes descritos.
• Valor menor: mais liberdade criativa e resultados potencialmente mais variados.
• Valor excessivamente alto: pode causar artefatos ou imagens menos naturais.

• Aumentar o número de passos de geração: pode melhorar qualidade e refinamento, mas não é o principal controle de especificidade do prompt.
• MASK_IMAGE_BLACK: relaciona-se ao uso de máscara em geração ou edição de imagens, não à especificidade textual.
• Prompt strength: é mais associado à força do prompt em processos como image-to-image; nesta questão, o parâmetro diretamente ligado à aderência textual é o CFG scale.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

1. Start with the 48-bit MAC address.
2. Split it into two 24-bit halves.
3. Insert FF:FE between the halves, creating a 64-bit value.
4. Invert the U/L bit—the seventh bit from the left in the first MAC byte.

text 
MAC:       00:1A:2B:3C:4D:5E 
EUI-64:    02:1A:2B:FF:FE:3C:4D:5E

• FE80 is the prefix commonly used for an IPv6 link-local address, not part of the EUI-64 interface ID.
• The interface ID is not random.
• The MAC address is modified by inserting FF:FE and changing the U/L bit.

• Suporta domínios personalizados.
• Oferece 50 GB de armazenamento — suficiente para os 10 GB de cada aplicação.
• Usa instâncias de computação dedicadas.
• Inclui balanceamento de carga entre instâncias.
• É o plano mais econômico entre as opções que atendem a todos esses requisitos.

• terraform apply
• terraform destroy

• A — Correct: Flow Builder is declarative and visual, so administrators and other non-developers can participate in designing and improving business processes without writing Apex.
• D — Correct: Flow Builder provides visual debugging tools, allowing an admin to test paths, inspect variable values, and identify where a specific business case fails.
• E — Correct: A flow’s visual structure documents the logic and makes later maintenance easier than reading and updating custom Apex code.

• B — Incorrect: Flow debugging does not attach a debugger to live customer sessions. The admin uses Flow Builder’s debug functionality with test inputs; this is not live-session debugging and should not be used to monitor real customer transactions.

• Planning and designing products and services
• Developing and delivering them
• Managing risks, suppliers, and resources
• Measuring performance
• Continually improving value delivery

• Value stream steps describe activities used to create and deliver value; they do not themselves provide the broader capabilities.
• Vision and operating model provide direction and structure, but they are not the practical management capabilities that enable the work.
• Value chain is the operating model showing how activities combine to create value; it is enabled by practices and resources.

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• The application failing to start or becoming unhealthy
• An incorrect probe path, port, or protocol
• The application needing more startup time
• Dependency or configuration failures
• A liveness probe being too aggressive

bash 
kubectl describe pod <pod-name> 
kubectl logs <pod-name> --previous

• Scale to more replicas: may hide the issue but does not diagnose it.
• Decrease initialDelaySeconds: makes probes run earlier and could worsen startup failures.
• Drain and reboot the node: node metrics are normal, so rebooting is not justified as the first step.

• Configure row-level security (RLS) using the sales region and the HR manager’s identity.
• Publish the reports and datasets through a Power BI app.
• Grant the HR managers permission to use the app, but do not add them as workspace members.
• App users can view and interact with reports while RLS limits them to their region.
• They cannot modify the report layout because they do not have workspace editing permissions.

• Adding them to the workspace gives them workspace permissions that may allow report or dataset changes, depending on the assigned role.
• Creating copies is unnecessary and creates maintenance and security problems.
• Hosting datasets and reports in different workspaces does not, by itself, provide the required controlled access.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

• Disaster recovery backups
• Long-term backup retention
• Data archiving that still needs occasional access

• Multi-Regional Storage: Intended for frequently accessed data needing broad geographic availability; it costs more.
• Regional Storage: Suitable for frequently accessed data within one region.
• Nearline Storage: Intended for data accessed roughly once per month, such as monthly backups.
• Coldline Storage: Better fit for backups accessed only during a disaster or occasional recovery event.

• A static IP gives the surveillance system a predictable local address, so users can reliably reach it on the LAN.
• However, a static IP does not block internet-based login attempts. If the router exposes the device through port forwarding, attackers could still reach it.
• Port mapping normally exposes an internal service externally, so A is a poor choice as written.
• Subnetting alone also does not block traffic; it would require routing/firewall rules.

• Understating expenses and liabilities
• Overstating profit
• Misleading users of the financial information
• Potentially breaching integrity, objectivity, and professional competence and due care

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects scripts into web pages viewed by other users.
• Sideloading: Installing an application from outside the official app store. It may install unauthorized apps, but it does not generally unlock the operating system or enable restricted system features.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• A. IDS attack signatures: Primarily detects suspicious network activity, not necessarily malware embedded in uploaded files.
• C. Load balancer: Improves availability and distributes traffic; it does not inspect documents for malware.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not scanning uploaded PDFs for malware.

• BIOS language support: Useful for usability, but not whether the PC can operate electrically.
• Supply chain security: Concerns procurement and hardware trust, not deployment across countries.
• Power efficiency: Important for energy usage, but it does not ensure compatibility with local power systems.

• Prevent connections to malware command-and-control servers
• Identify infected systems making those DNS requests
• Collect information for incident response

• A: Attackers do not normally use sinkholes to map a company’s domain structure.
• B: Redirecting employees from legitimate sites to attacker-owned sites describes malicious DNS manipulation, not a defensive sinkhole.
• D: Attracting attackers away from real resources is more closely associated with a honeypot or deception system.

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

• s3:GetObject for the relevant objects
• s3:ListBucket if listing is required
• Appropriate bucket and object resource permissions

• B: Making the bucket public is insecure and unnecessary.
• C: Prompt engineering cannot override AWS IAM or encryption permissions.
• D: Data sensitivity does not determine whether the role can access it.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• A: Describes a broad purpose and direction, but is not the specific CIMA definition.
• C: “Scoping out” activities is too vague and incomplete.
• D: Combines long-term goals, strategies and policies, but describes a wider strategic-planning statement rather than the definition of strategy itself.

• C series: CPU-optimized instances; not designed primarily for LLM training.
• G series: GPU instances generally optimized for graphics and some machine learning workloads, but not specifically large-scale model training efficiency.
• P series: Powerful GPU instances for ML training, but typically consume more energy than Trainium-based instances for suitable training workloads.

1. Clear principles and boundaries — Employees have freedom, but decisions must remain within clear organizational values, policies and limits.
2. High degree of freedom — Managers are trusted to make decisions rather than seeking continual approval from senior management.
3. Frontline customer responsibility — Customer-facing managers should be empowered to manage customer relationships and respond quickly to needs.
4. Transparent and ethical information — Information should be openly available and used honestly, supporting trust and informed decision-making.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• The requirement is an assessment of the Azure environment’s design, which requires a support plan offering proactive architectural guidance.
• Premier support would provide this capability, but it is a high-cost option.
• Since the requirement says to minimize expenses, Premier is not the best recommendation.
• A lower-cost plan with the required advisory/design-review capability—historically Professional Direct in Azure’s support-plan model—would be more appropriate.

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

• Transfer — przeniesienie skutków lub kosztów ryzyka na inna organizacje, np. przez ubezpieczenie lub umowe.
• Akceptacja — firma swiadomie przyjmuje ryzyko bez dodatkowych dzialan.
• Mitigacja — zmniejszenie prawdopodobienstwa wystapienia ryzyka lub jego wplywu, np. przez wdrozenie kontroli bezpieczenstwa.
• Unikanie — calkowite wyeliminowanie ryzykownej dzialalnosci.

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• Azure Resource Manager (ARM) templates
• Or, in newer Azure terminology, Bicep files

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• Monitoring: Detects activity but does not remove the underlying risk.
• Patching: Useful for systems that must remain operational, but these desktops are unused.
• Isolating: Can be a temporary containment measure, but permanently removing unnecessary systems is more appropriate.

• Customers may boycott V’s products.
• Supermarket customers may stop buying from V.
• Investors may view V as having higher legal, ethical and reputational risk.
• V could face fines, lawsuits, contract losses and higher costs.
• Expected future profits may fall.