BACB BACB Exam Prep
Board Certified Behavior Analyst (Page 6 )

• A — conformant: Incorrect because one explicit requirement is violated.
• B — consistent: “Consistent” is not sufficient where the implementation contradicts a mandatory specification. The RPC mechanism is covered by the architecture, and the implementation differs from it.
• C — consistent: Incorrect reasoning: the RPC mechanism does have a defined architectural requirement, so conformance must be assessed.
• D — non-conformant: Correct because the implementation fails to follow the specified RPC/threading requirement.

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• Valor maior: mais aderência às instruções e aos detalhes descritos.
• Valor menor: mais liberdade criativa e resultados potencialmente mais variados.
• Valor excessivamente alto: pode causar artefatos ou imagens menos naturais.

• Aumentar o número de passos de geração: pode melhorar qualidade e refinamento, mas não é o principal controle de especificidade do prompt.
• MASK_IMAGE_BLACK: relaciona-se ao uso de máscara em geração ou edição de imagens, não à especificidade textual.
• Prompt strength: é mais associado à força do prompt em processos como image-to-image; nesta questão, o parâmetro diretamente ligado à aderência textual é o CFG scale.

• Monitoring: Detects activity but does not remove the underlying risk.
• Patching: Useful for systems that must remain operational, but these desktops are unused.
• Isolating: Can be a temporary containment measure, but permanently removing unnecessary systems is more appropriate.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Sending calls to available agents quickly
• Balancing interactions across agents
• Preventing calls from being handled manually one at a time

• Workforce Management: Forecasts demand and schedules enough staff; it supports wait-time reduction but does not directly distribute calls.
• Skill-based Routing: Routes calls based on agent skills and may improve the customer experience, but the question is asking about the core feature that distributes calls efficiently.
• IVR: Lets callers navigate menus and self-service options; it does not primarily assign calls to agents.

• A — Increasing the minimum password length to 14 characters: Longer passwords have more possible combinations, making them harder to guess or crack through brute force.
• F — Requiring at least one special character: This increases password complexity and expands the possible character combinations.

• MD5 to SHA-512: Improves password-hash resistance, but does not stop users from choosing easy-to-guess passwords. Also, modern systems should use a password-specific hashing algorithm such as bcrypt, scrypt, or Argon2.
• Increasing maximum age to 120 days: Leaves weak passwords in use longer.
• Reducing minimum length to 10: Makes guessing easier.
• Reducing minimum age to zero: Allows immediate password changes but does not make the password itself harder to guess.

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• Basic: Self-help only; no technical support or design assessment.
• Standard: Technical support, but not the full proactive architectural guidance required here.
• Professional Direct: Provides proactive guidance and architecture-related assistance.
• Premier: Also supports this, but is a more expensive, enterprise-level option.

• Looking up accounts, contacts, and opportunities
• Logging calls and updating Salesforce records
• Accessing previously available customer information when temporarily offline

• Salesforce Touch App: Primarily an older tablet-focused experience, not the best general solution for the sales team.
• Custom hybrid app: Unnecessary development when Salesforce provides the required capabilities natively.
• SalesforceA: Intended mainly for Salesforce administrators, not sales representatives.

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

1. Ingestion Lambda receives requests from API Gateway and places messages in an SQS queue.
2. Processing Lambda is triggered by the queue and loads records into Aurora PostgreSQL.

• Decoupling: API request handling is separated from database loading.
• Buffering: SQS absorbs bursts when incoming traffic exceeds the database’s processing capacity.
• Controlled concurrency: Configure the SQS-triggered Lambda’s concurrency and batch size to avoid overwhelming Aurora or exhausting database connections.
• Automatic retries: Messages that fail processing can return to the queue and be retried. A dead-letter queue can capture persistent failures.
• Lower operational effort: The solution remains serverless and avoids managing EC2 servers or Kubernetes clusters.

• A: EC2 and Tomcat add server-management overhead.
• B: DynamoDB/DAX would require changing the database model and does not solve the Aurora ingestion design.
• C: SNS is useful for notifications and fanout, but SQS is better for durable buffering and backpressure in this producer-consumer workflow.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• Customer contains one row per customer and the customer’s Address ID.
• Address contains one row per address and the corresponding location details.

1. Select the Customer query.
2. Choose Merge Queries.
3. Match Customer[Address ID] with Address[Address ID].
4. Use a Left outer join so every customer is retained.
5. Expand the merged Address column and select City, State/Region, and Country.

• Append adds rows vertically and is used for tables with the same structure.
• Group By summarizes rows rather than adding related columns.
• Transpose switches rows and columns and does not establish a relationship.

• nomes de pessoas;
• organizações;
• locais;
• datas;
• números de processos;
• leis ou contratos.

• NER = identifica informações específicas e classificáveis.
• Sumarização = reduz um documento e apresenta seus pontos principais.

• Fileless malware: Nothing in the command indicates malware executing only in memory.
• Living-off-the-land binaries: Mimikatz is a credential-access tool, not a normal system utility used for LOLBin abuse.
• Social engineering: The command shows technical credential abuse, not manipulation of an accountant.

• Matching hashes: The software is unchanged.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality.
• Baselines: Define approved configurations or normal performance.
• Tokenization: Replaces sensitive data with tokens.

• The Subscribe to Reports user permission.
• At least Viewer access to the report’s folder.
• Access to the report itself.

• Subscribe to Reports: Run Reports is not the relevant Salesforce permission.
• Chatter Subscribe to Reports is not a Salesforce permission.
• Set Running User relates to configuring the user whose permissions determine report results—not subscribing to a report.

• BIOS language support: Useful for usability, but not whether the PC can operate electrically.
• Supply chain security: Concerns procurement and hardware trust, not deployment across countries.
• Power efficiency: Important for energy usage, but it does not ensure compatibility with local power systems.

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

json 
"Resource": "arn:aws:s3:::bucket-name/*"

• A: Revoking or changing an instance profile does not reliably invalidate temporary credentials that have already been issued and may still be valid.
• B: Changing the EC2 security group does not necessarily stop the attacker from using the stolen credentials from elsewhere.
• C: Amazon Macie helps discover sensitive data; Object Lock prevents modification/deletion, not reads or downloads.

• Cloud architecture
• Data architecture
• Platform engineering
• Data engineering
• Provisioning and modernization

• Data protection is associated mainly with security and risk management.
• Data governance belongs to the governance perspective.
• Data science is not an AWS CAF capability.

• C series: CPU-optimized instances; not designed primarily for LLM training.
• G series: GPU instances generally optimized for graphics and some machine learning workloads, but not specifically large-scale model training efficiency.
• P series: Powerful GPU instances for ML training, but typically consume more energy than Trainium-based instances for suitable training workloads.

• An Anypoint VPC provides private network connectivity for CloudHub applications.
• An IPsec VPN tunnel or AWS Direct Connect connects that VPC to the customer’s on-premises network without exposing the database to the public internet.
• The VPC and on-premises firewalls must allow the required traffic, routes, and ports.

• Static IP addresses only identify the application’s outbound traffic; they do not create a private network path to the database.
• A Dedicated Load Balancer does not replace the required network connection to the on-premises environment. It is also unnecessary merely to reach individual databases.
• Moving sensitive databases to a DMZ is not the intended architecture and could reduce their protection.

• A Layer 2 switch checks the destination MAC address in its MAC address table (CAM table).
• If the destination MAC is unknown, the switch cannot select a specific outgoing port.
• It therefore performs unknown-unicast flooding, sending the frame out every other port in that VLAN.
• The frame is not sent back through the port where it arrived.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

Correct choices

• DB1: Azure Data Box Heavy
• Virtual machines: Azure Migrate

Why

• Replication with minimal downtime
• A test migration
• Final cutover after validation

• Due Date
• Order Date
• Delivery Date

DAX 
Order Date = 'Due Date' 
Delivery Date = 'Due Date'

• Due Date[Date] ? Sales[Due Date]
• Order Date[Date] ? Sales[Order Date]
• Delivery Date[Date] ? Sales[Delivery Date]

• 25 — Traditional SMTP server-to-server delivery; often restricted for client submission and not inherently encrypted.
• 110 — POP3 for retrieving email; unencrypted by default.
• 143 — IMAP for retrieving and synchronizing email; unencrypted by default.
• 587 — Authenticated SMTP submission, commonly secured with STARTTLS.

• Import mode loads the data into the Power BI model. Visuals query the in-memory model, which generally provides faster calculation and rendering than DirectQuery.
• Import mode also minimizes online processing because report interactions do not send queries back to the dataflow or SQL Server.
• A daily refresh can load data through the previous day, satisfying the freshness requirement without unnecessary hourly processing.

• DirectQuery keeps querying the data source or dataflow during report use, increasing online processing and potentially slowing visuals.
• Adding a gateway enables connectivity for on-premises sources, but it does not remove the performance disadvantages of DirectQuery.
• An hourly Power Automate refresh is unnecessary when the requirement is only data through the previous day and creates additional processing overhead.

• The user authenticates with the external Identity Provider.
• Salesforce receives the SAML assertion.
• Salesforce uses attributes in that assertion—such as username, email, first name, last name, and profile/community information—to create the user during the first login.
• On later logins, Salesforce updates or uses the existing user record.

• On-the-fly provisioning is a general phrase; the Salesforce capability being tested is specifically JIT provisioning.
• Salesforce APIs would require a separate integration and provisioning process.
• Identity Connect is designed primarily to synchronize users from an identity directory, not to create users at the moment of their first SAML login.

• B. The community must be built with the Customer Account Portal template.

• C. An experience ID (expid) or placeholder parameter must be used in the URL.

• A: The Visualforce + Salesforce Tabs template does not provide this dynamic branding capability.
• D: An external CMS is not required. The branding configuration is handled within Salesforce Experience Cloud.

• Generates a syslog message
• Shuts down the PoE port
• Places the port into error-disabled (err-disabled) state
• Frees the power allocation

• A device starting to draw power does not necessarily generate a syslog message.
• Monitoring does not pause data traffic while checking power.
• Drawing less than the configured minimum does not automatically mean the device has failed and should be disconnected.

• B — Prompts and suggestions retained for 28 days
• C — User engagement data kept for two years

• The key distinction is between content data—your prompts, code context, and generated suggestions—and engagement data, such as usage activity.
• Do not confuse retention with training: enterprise Copilot data is generally not used to train GitHub’s models without appropriate authorization.
• For a current exam, verify the policy version cited by the exam provider. The key’s C is likely correct, but B should be treated cautiously and may no longer reflect the current policy.

• Works across SaaS and internal applications: TOTP is widely supported by authentication systems and can be integrated into many applications.
• Device manufacturer agnostic: A hardware token or authenticator application can generate the code without depending on a specific computer or phone manufacturer.
• Offline capability: The code is generated locally using a shared secret and the current time; an internet connection or cellular service is not required.

• Username and password: May work offline but provides weaker authentication and does not meet the intended improvement in security.
• Biometrics: Can depend on device hardware, operating-system support, and enrollment mechanisms.
• SMS verification: Requires cellular connectivity and is vulnerable to threats such as SIM swapping.

• 25 — Traditional SMTP server-to-server mail transfer; not normally used for secure client submission.
• 110 — POP3, used to retrieve email and typically unencrypted.
• 143 — IMAP, used to access email and typically unencrypted.

• Customize Opportunity Contact Role

• Add the Opportunity Contact Role related list to the Opportunity page layout

• Campaign Member Role relates contacts or leads to campaigns, not opportunities.
• Campaign Member related list would expose campaign participation, not the stakeholders for the opportunity.
• Customize Campaign Role also concerns campaigns.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• IKE: Negotiates security parameters for IPsec VPNs; it does not identify switch ports.
• VLAN: A logical network segmentation method, not a discovery protocol.
• netstat: Displays local network connections and listening services, but cannot identify the physical switch or port.

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

• The VM keeps its configuration, disks, IP settings, and associated resources.
• The operation may cause downtime.
• You cannot guarantee that it will move specifically to Host2; Azure selects the new host.
• Update management is for update configuration, not host relocation.
• Moving to another subscription does not move the VM to a different physical host.
• Usage location is unrelated to VM placement.

• An Azure pay-as-you-go subscription follows an operational expenditure (OpEx) model.
• With OpEx, the organization pays for services as they are used, typically based on consumption.
• There is no need to purchase and maintain physical servers upfront.
• This contrasts with capital expenditure (CapEx), where the company makes a significant upfront investment in infrastructure, such as on-premises Hyper-V hosts.

• SQL injection
• Cross-site scripting (XSS)
• Malicious file uploads
• Common web-application exploits

• Layer 4 firewall: Filters primarily by IP addresses, ports, and transport protocols; it lacks detailed web-application inspection.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specialized for protecting web applications.
• UTM: Combines several security functions in one device, but it is not specifically focused on web-application attacks.

• Internal interface ? connected toward the corporate network/internal firewall
• External interface ? connected toward the Internet-facing firewall

1. A route for the internal corporate network through the internal-facing interface/firewall.
2. A default route (0.0.0.0/0) through the Internet-facing interface/firewall.