BCS FBA15 Exam Prep
Foundation Certificate in Business Analysis Exam (Page 6 )

• A. IDS attack signatures: Detects suspicious network activity, but is not primarily designed to scan uploaded files for malware.
• C. Load balancer: Distributes traffic among servers and improves availability; it does not inspect files for threats.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not malware scanning of uploaded documents.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• Which batches and markets are affected
• Whether the deficiency affects product quality, efficacy, or patient safety
• Whether the issue is an ongoing manufacturing problem
• Whether immediate containment or distribution suspension is needed

• A — Withdraw the product: may be necessary, but is premature before assessing the risk.
• B — “Dear Dr.” letter: may be appropriate later, depending on the risk.
• C — Notify global authorities: may become mandatory, but the scope and urgency depend on the assessment.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• 25 — Traditional SMTP server-to-server mail delivery; often restricted and not the usual client submission port.
• 110 — POP3, used for retrieving email; normally unencrypted.
• 143 — IMAP, used for retrieving and synchronizing email; normally unencrypted.

• A: Describes an update-set conflict, not a Dictionary Override.
• B: Describes a configuration item or change concept.
• C: Describes an approval or workflow activity.

• Tokens: Individual units of text processed by a model, such as words, subwords, or characters.
• Models: Systems that learn patterns and generate predictions or outputs.
• Binaries: Data represented using the binary number system, not semantic representations.

• transform() — modifies every element in an array
• filter() — keeps elements matching a condition
• exists() — checks whether any element matches
• aggregate() — reduces array elements to one result

sql 
SELECT transform(scores, x -> x * 2) 
FROM student_scores;

• A is incorrect because higher-order functions are mainly useful for nested or complex data.
• B is incorrect because they do not convert logic into Python.
• D is incorrect because their purpose is not to fix slow built-in functions, but to process arrays or maps with custom logic.

• Delete the City column
• Remove duplicates from the Country column

1. ???? City ??? ????? ?? ???? ?????? ???? ?????.
2. ???? ???? Country ?????? Remove duplicates ?????? ??? ?? ???? ??? ?????.

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• A: Knowledge of IT platforms, networks, and methodologies — Useful technical knowledge, but the CISO does not need to be the deepest technical expert.
• C: Regulatory and project management knowledge — Important, but compliance and projects must still support the organization’s broader needs.
• D: Managing people and resources — Essential for execution, but effective management of the wrong security priorities will not produce good results.

• A — .gitignore: Controls Git tracking; it does not configure Copilot exclusions.
• B — copilot.ignore: This is not the standard GitHub Copilot Business exclusion mechanism.
• D — Renaming files: Adding _no_copilot has no recognized effect.

• Complete MFA, or
• Securely change their password

• Identity Protection: evaluates user and sign-in risk and can trigger remediation.
• Privileged Identity Management (PIM): manages temporary, just-in-time access to privileged roles; it does not automatically require password changes for risky sign-ins.

• Where to find the TiMOS runtime image
• Which configuration file to load
• The IP address and related settings for the CPM management Ethernet port

• A: User authorization is configured in the router’s security configuration, not primarily in the BOF.
• C: Hardware initialization is performed by the boot process and system software.
• D: The system date and time are configured separately, often through NTP or CLI settings.

• 50% memory utilization baseline: The environment can be provisioned with excess capacity, leaving room for growth and workload spikes.
• Storage scalability: Cloud storage can generally be expanded as needed without redesigning the physical platform.
• Single circuit failure resilience: A properly designed IaaS provider uses redundant power circuits and infrastructure, so failure of one circuit should not take the platform offline.

• A — Dual PDUs: Helps with power redundancy but does not provide storage scalability.
• C — Network load balancing: Provides network-path resilience, not memory or storage scalability, and does not address a power-circuit failure.
• D — Multiple NAS devices: May improve storage capacity, but does not inherently provide power resilience or the required compute-capacity baseline.

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• The job keeps 31 days of regular restore points. A backup from the week of January 1 is older than 31 days by March 20, so it is no longer expected to remain on the performance tier.
• It is also a weekly GFS full backup, retained for 14 weeks. Therefore, it is still protected and has not been deleted.
• In a Scale-out Backup Repository, older backups can be moved from the performance tier to the capacity tier—typically object storage—according to the configured offload policy.
• The archive tier is not selected because the question’s configuration does not indicate that the backup has been archived there.

1. Initiate — establish the project, scope, team, and governance.
2. Plan — develop the detailed plan, schedule, resources, and implementation approach.
3. Execute — configure, integrate, migrate, test, and prepare the solution.
4. Deploy — move the solution into production and support go-live.
5. Close — complete handover, confirm outcomes, and formally close the project.

• GPS coordinates
• Date and time the image was taken
• Camera or device model
• Exposure settings

• Log data: Records events or activities, such as system or application activity.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification for information requiring protection; geolocation may be sensitive, but the technical type stored in the image is metadata.

• A: Concerns task scheduling and avoiding missed runs, not directly sizing the warehouse.
• B: The amount of data in a stream alone does not reliably determine compute needs; the SQL processing is what matters.
• D: A multi-cluster warehouse addresses concurrency, not the compute size needed for one task execution.

• Document feeder: A scratch, dirt, or debris on the feeder glass or rollers can create a line on every scanned image.
• Pickup rollers: Move paper through the printer; they would not normally create a scanner-only line.
• Corona wire: Affects toner charging and would cause defects on printed output.
• Drum assembly: Also affects printed pages, so faxes and computer print jobs would show the line too.

• Footprinting is reconnaissance used to map an organization’s network, hosts, naming conventions, and services.
• A name such as fshare.int.complia.org suggests an internal file-sharing host (fshare) and an internal naming structure (int).
• This can reveal useful information to an attacker before attempting exploitation.

• ISP-assigned address space: Usually determined through public registration and DNS data, not an internal hostname.
• DNS sinkhole bypass: Would involve avoiding redirected malicious-domain queries.
• Initial access: DNS reconnaissance alone does not compromise the server.
• Data exfiltration: DNS tunneling typically generates many encoded or unusually long subdomain queries, not simply a meaningful internal hostname.

• User-generated content: precisa ser coletado, filtrado, anonimizado e rotulado.
• Moderation logs: podem conter dados inconsistentes, informações pessoais e decisões que precisam ser revisadas.
• Content moderation guidelines: são regras ou orientações, não dados diretamente utilizáveis para medir o comportamento do modelo.

• Technical platform interfaces: Important for integration and interoperability, but they should support—not drive—the architecture.
• Scalability of the network: Valuable as the organization grows, but a scalable solution is ineffective if it does not meet business or security needs.
• Development methodologies: Relevant to implementation, but they do not define the organization’s fundamental security requirements.

• Microsoft Purview portal: Create and manage sensitivity labels and configure support for sensitivity labels used with Office files in SharePoint and OneDrive.
• SharePoint admin center: Primarily manages SharePoint settings. Older guidance and PowerShell procedures used SharePoint tenant configuration, which can make this question confusing.
• IRM: Concerns Information Rights Management and is a separate protection mechanism; it should not be used to identify the portal for configuring Microsoft Purview sensitivity labels.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• netstat -tuln can show listening TCP ports.
• If the web service is not listening, or is bound only to 127.0.0.1, remote browsers cannot connect even though the server responds to ping.

• traceroute: Tests the path to the server, but ping already confirms basic reachability.
• tcpdump: Useful for detailed packet analysis, but it is more appropriate after checking whether a service is listening.
• arp: Helps troubleshoot local IP-to-MAC resolution, not an application-layer web connection.

• Microsoft manages the physical datacenter, hardware, and virtualization.
• You manage the virtual machine’s operating system, installed software, configuration, and data.
• You choose the VM size, storage, networking, and scaling options.

• SaaS: You consume a complete application managed by the provider, such as Microsoft 365.
• PaaS: You deploy applications without managing the underlying operating system or VM infrastructure, such as Azure App Service.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

• B — Data source settings in Power BI Desktop:

• D — Formula bar in Power Query Editor:

m 
  Excel.Workbook(File.Contents("new path"))

• E — Advanced Editor in Power Query Editor:

• A: Dataset settings in the Power BI service mainly handle credentials and gateway settings, not changing the local file path embedded in the PBIX.
• C: Current File data-load settings control refresh/load behavior, not the source location.

• The vulnerability scan identifies a vulnerability.
• The administrator verifies that the vulnerability is not present.
• Therefore, the scan produced a false positive.

• True positive: A vulnerability is reported and genuinely exists.
• False negative: A vulnerability exists, but the scan fails to detect it.
• True negative: No vulnerability exists, and the scan correctly reports no issue.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• Training data for potential bias before model training
• Trained models for bias in predictions
• Model features to help explain how they influence predictions

• A: RAG workflows are typically built using services such as Amazon Bedrock, knowledge bases, and data sources.
• B: Monitoring model quality in production is primarily associated with SageMaker Model Monitor.
• C: Documenting model details is handled by capabilities such as SageMaker Model Cards.

• File1 contains the evaluation configuration—for example, evaluators, test data, thresholds, or evaluation parameters.
• The GitHub Actions workflow must reference that file through the evaluation-config input so the action knows which evaluation to run.
• project-endpoint identifies the Microsoft Foundry project, but it does not identify the evaluation definition. It is also typically required, but it does not answer the specific requirement about using File1.

• LastName: Required.
• FirstName: Optional.
• AccountId: Optional; a Contact may be associated with an Account later or remain private, depending on organization settings.
• Name: A compound display field made from first and last name; it isn’t entered as a separate field.

• sn_si_admin is an SIR administrator role.
• The prefix helps prevent naming conflicts between applications.
• It does not refer to a “Secure Identity token” or an instance security check.

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• NTLM: Uses Windows challenge-response authentication and does not provide the normal web-based MFA redirect flow.
• Single Sign-On: Automatically reuses existing credentials; it is intended to avoid prompting, not to support an MFA workflow.
• Transparent: Intercepts the session without redirecting the user to a separate authentication page.

• How quickly the vendor must respond to incidents or requests
• Availability or uptime requirements
• Resolution time targets
• Performance expectations and penalties for failing to meet them

• SOW (Statement of Work): Describes the work, deliverables, scope, and schedule.
• MOA (Memorandum of Agreement): Documents an agreement in which parties commit to specific responsibilities.
• MOU (Memorandum of Understanding): Records a general intention to cooperate; it may not be legally binding.

1. Open Notepad as Administrator.
2. Open:

1. Remove or correct the line mapping the website to the wrong IP address.
2. Save the file.
3. Optionally run:

cmd 
   ipconfig /flushdns

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• The server accepts unauthenticated image uploads, which creates an opportunity for an attacker to upload a malicious script disguised as an image or using an unexpected file type.
• A web shell is a malicious script placed on a web server that gives an attacker remote command execution through web requests.
• The suspicious process and outbound connection to a low-reputation IP are consistent with the attacker using the web shell to execute commands or establish communication with command-and-control infrastructure.

• Worm: Usually self-propagates across multiple systems; the scenario focuses on the upload page.
• Cryptocurrency mining: Possible, but there is no indication of resource-intensive mining activity or insider involvement.
• Rootkit Trojan over RDP: The evidence points to the vulnerable upload functionality, not an exposed RDP service.

• Reporting relationships
• Organizational structures
• Leadership styles
• Team maturity
• Individual and group behavior
• Communication and motivation

• Acquire Project Team: Focuses on obtaining the people needed for the project.
• Develop Project Team: Focuses on improving team skills, relationships, and performance.
• Manage Project Team: Focuses on tracking performance, resolving issues, and managing changes within the team.

• Share files with the wrong people
• Use public links unnecessarily
• Fail to classify sensitive data
• Upload data to unauthorized services
• Misunderstand company sharing policies

• A — Step-up authentication: Helps protect administrator accounts, but does not directly address improper file sharing by users.
• C — Password complexity: Helps reduce password attacks, not accidental data disclosure.
• D — Mobile device management: Secures managed mobile devices, but does not directly control file-sharing behavior across the organization.