BICSI RCDD-002 Exam Prep
BICSI Registered Communications Distribution Designer - RCDD (Page 35 )

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• Error correction (ECC): Improves data reliability but does not maximize bandwidth.
• RAM voltage: Increasing voltage may affect stability or speed, but it is not the primary method for increasing module bandwidth.
• Physical module size: Refers to the capacity or form factor of the RAM, not its data-transfer bandwidth.

• Restarting the device: May fix software glitches, but would not usually make cable orientation matter.
• Swollen battery: A safety concern, but it would not typically cause recognition only in one cable orientation.
• Failing cable: Possible, but less likely because the problem occurs with this particular device and not other devices of the same type.

• The vulnerability scan identifies a vulnerability.
• The administrator verifies that the vulnerability is not present.
• Therefore, the scan produced a false positive.

• True positive: A vulnerability is reported and genuinely exists.
• False negative: A vulnerability exists, but the scan fails to detect it.
• True negative: No vulnerability exists, and the scan correctly reports no issue.

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• Blue team: Defends systems, monitors activity, and responds to attacks.
• Purple team: Coordinates red- and blue-team activities to improve defenses.
• White team: Oversees or manages the exercise, including rules and scope.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio management
• Data governance
• Risk management
• Compliance

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

Correct choices

• DB1: Azure Data Box Heavy
• Virtual machines: Azure Migrate

Why

• Replication with minimal downtime
• A test migration
• Final cutover after validation

• Approve major information security policies
• Allocate funding and resources
• Set the organization’s risk appetite
• Ensure security supports business objectives

• Evaluating vendors is generally handled by security, procurement, or technical teams.
• Assessing risks is typically performed by security and risk-management professionals, with management accepting or prioritizing the risks.
• Monitoring regulatory adherence is usually handled by compliance, audit, or security functions.

• Wireshark captures packets and allows you to examine their contents, potentially revealing usernames and passwords sent without encryption.
• Netcat creates network connections and can send or receive data, but it is not primarily a packet-analysis tool.
• Nessus scans for known vulnerabilities and configuration issues; it generally would not prove that credentials are visible in transit.
• Nmap performs network discovery and port/service scanning, not detailed packet-content inspection.

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• NIDS: Monitors network traffic for suspicious activity and network-based attacks targeting the application or its supporting services.
• HIPS: Protects an individual host by monitoring processes, files, and system activity. It can help secure the web server, but it is not focused specifically on the application’s network attack surface.
• SIEM: Aggregates and correlates logs; it does not directly prevent attacks.
• Honeypot: A decoy system, not the primary protection for a production web application.
• Certificate revocation list: Deals with certificate trust, not application exploitation.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

• Remote and global work: Access is based on the approved device, not a specific office or geographic location.
• Seamless login: Users may not need to repeatedly enter credentials on a recognized device.
• Limited equipment: It uses devices employees already have rather than requiring separate hardware.

• Geotagging: Restricts access based on location and may prevent legitimate remote work.
• Smart cards: Require issuing and managing additional physical equipment.
• Time-based logins: Limit access by time and do not provide a seamless authentication experience.

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Restrict a port to a defined number of MAC addresses
• Use statically configured or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious traffic but is not the primary control for switch-port MAC limits.
• NGFW: Filters routed network traffic, not the switch’s CAM/MAC address table directly.

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• Training or coaching
• Mentoring
• Additional support or resources
• Targeted performance improvement plans

• A: Recognition may be appropriate, but awards do not address identified gaps.
• C: Rotating schedules does not necessarily improve the specific competencies that are missing.
• D: Assessment results should be handled sensitively, but keeping them entirely private prevents useful feedback and development discussions.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A sophisticated attack sponsored by a government.
• Shadow IT: Unapproved technology or access methods used by employees.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• Understating expenses and liabilities
• Overstating profit
• Misleading users of the financial information
• Potentially breaching integrity, objectivity, and professional competence and due care

• HTTPS: Secure web traffic, not general command-line server administration.
• SNMPv3: Secure network monitoring and management, not interactive server login.
• RDP: Provides graphical remote desktop access. It can be secure, but it is not the direct replacement for Telnet in this scenario.
• SMTP: Used to send email.

• Database data: Aggregates are used to retrieve structured data, commonly from entities and database sources.
• Screen scope: A Screen Aggregate belongs to the screen where it is defined and is not directly reusable as a screen-level aggregate elsewhere.
• Asynchronous and parallel execution: Multiple Screen Aggregates can run asynchronously and in parallel, helping the screen load data efficiently.

• Sensitive document shared during a Teams chat: Teams chat
• Sensitive document stored/shared in a Teams channel: Teams channel messages

• Files shared in a chat are generally stored in the sender’s OneDrive, but the relevant DLP context is the Teams chat message and its attachment.
• Files shared in a channel are stored in the team’s SharePoint site, but the relevant context is the Teams channel message.
• The DLP rule can then use an action such as restrict access to the content to prevent guest users from opening the sensitive document.

• Confirm the required columns and data types
• Identify the target/label column
• Handle missing or duplicate records if present
• Transform data into a suitable format
• Split it into training and validation/test datasets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

• SOW
• SLA
• MOA
• MOU

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• Each Azure VM must have at least one network interface (NIC).
• A single NIC can have:

• Therefore, each of the five VMs needs only one NIC:

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

• Financial performance
• Customer perspective
• Internal business processes
• Learning and growth

• Increasing the number of indicators can make the scorecard cluttered and less useful. Measures should be limited to those that are strategically important.
• The scorecard is mainly a tool for implementing and monitoring strategy, not for formulating strategy.
• It should contain both leading indicators and lagging indicators. Leading indicators predict future performance, while lagging indicators measure results already achieved.

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

• A user connects with their Google account.
• Google associates the user’s SSH key with that identity.
• IAM roles determine whether they can log in.
• Access can be tied to a specific employee for auditing.
• Removing the IAM role removes their login access.

• compute.osLogin: regular OS login access
• compute.osAdminLogin: OS login with administrative privileges, typically including sudo

text 
enable-oslogin=TRUE

• File1.png — Yes: User1 can apply Label1 with the Microsoft Purview Information Protection client. The client supports labeling image files such as .png in this scenario.

• Folder2 — No: Folder2 is the root folder. The client does not allow labeling the root folder itself. Although the client can label ordinary folders, selecting one applies the label to existing files and subfolders—not automatically to future files.

• File1.docx — Yes: .docx is a supported Microsoft Word file type, so User1 can apply Label1 to it.