Free 300-410 Exam braindumps download (300-410 exam dumps Free)

QUESTION: 265 Exam Topic: Mix Questions

Refer to the exhibit.

RR Configuration:
router bgp 100
neighbor IBGP peer-group
neighbor IBGP route-reflector-client
neighbor 10.1.1.1 remote-as 100
neighbor 10.1.2.2 remote-as 100
neighbor 10.1.3.3 remote-as 100

The network administrator configured the network to establish connectivity between all devices and notices that the ASBRs do not have routes for each other.
Which set of configurations resolves this issue?

router bgp 100
neighbor IBGP update-source Loopback0
router bgp 100
neighbor IBGP next-hop-self
router bgp 100
neighbor 10.1.1.1 next-hop-self
neighbor 10.1.2.2 next-hop-self
neighbor 10.1.3.3 next-hop-self
router bgp 100
neighbor 10.1.1.1 peer-group IBGP
neighbor 10.1.2.2 peer-group IBGP
neighbor 10.1.3.3 peer-group IBGP

Answer(s): D

Show Answer Next Question

QUESTION: 266 Exam Topic: Mix Questions

Refer to the exhibit. A prefix list is created to filter routes inbound to an EIGRP process except for network 10 prefixes. After the prefix list is applied, no network 10 prefixes are visible in the routing table from EIGRP. Which configuration resolves the issue?

ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32
ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9 ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32
ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9
ip prefix-list EIGRP seq 5 permit 10.0.0.0/8 ge 9 no ip prefix-list EIGRP seq 20 permit 10.0.0.0/8

Answer(s): D

Show Answer Next Question

QUESTION: 267 Exam Topic: Mix Questions

Refer to the exhibit. An engineer configured SNMP traps to record spoofed packets drop of more than 48000 a minute on the ethernet0/0 interface. During an IP spoofing attack, the engineer noticed that no notifications have been received by the SNMP server. Which configuration resolves the issue on R1?

ip verify unicast notification threshold 800
ip verify unicast notification threshold 8000
ip verify unicast notification threshold 48000
ip verify unicast notification threshold 80

Answer(s): A

Reference:

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/12-4t/sec-data-urpf-12-4t-book/sec-urpf-mib.html

Show Answer Next Question

QUESTION: 268 Exam Topic: Mix Questions

Refer to the exhibit. An engineer implemented an access list on R1 to allow anyone to Telnet except R2 Loopback0 to R1 Loopback4. How must sequence 20 be replaced on the R1 access list to resolve the issue?

sequence 20 permit tcp host 1001:ABC:2011:7::1 host 400A:0:400C::1 eq telnet
sequence 20 deny tcp host 400A:0:400C::1 host 1001:ABC:2011:7::1 eq telnet
sequence 20 permit tcp host 400A:0:400C::1 host 1001:ABC:2011:7::1 eq telnet
sequence 20 deny tcp host 1001:ABC:2011:7::1 host 400A:0:400C::1 eq telnet

Answer(s): D

Show Answer Next Question

QUESTION: 269 Exam Topic: Mix Questions

Refer to the exhibit. An engineer implemented CoPP to limit Telnet traffic to protect the router CPU. It was noticed that the Telnet traffic did not pass through CoPP. Which configuration resolves the issue?

ip access-list extended TELNET
permit tcp host 10.2.2.1 host 10.2.2.4 eq telnet
permit tcp host 10.1.1.1 host 10.1.1.3 eq telnet
policy-map COPP
class TELNET
police 8000 conform-action transmit exceed-action transmit
ip access-list extended TELNET
permit tcp host 10.2.2.4 host 10.2.2.1 eq telnet
permit tcp host 10.1.1.3 host 10.1.1.1 eq telnet
policy-map COPP
class TELNET
police 8000 conform-action transmit
exceed-action transmit violate-action drop

Answer(s): C

Show Answer Next Question

QUESTION: 270 Exam Topic: Mix Questions

Refer to the exhibit. After configuring OSPF in R1, some external destinations in the network became unreachable. Which action resolves the issue?

Disconnect the router with the OSPF router ID 0.0.0 0 from the network.
Increase the SPF delay interval on R1 to synchronize routes.
Change the R1 router ID from 10.255.255.1 to a unique value and clear the process.
Clear the OSPF process on R1 to flush stale LSAs sent by other routers.

Answer(s): C

Reference:

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/118880-technote-ospf-00.html

Show Answer Next Question

QUESTION: 271 Exam Topic: Mix Questions

Refer to the exhibit. A network engineer receives a report that Spoke 1 users can perform bank transactions with the server located at the Center site, but Spoke 2 users cannot. Which action resolves the issue?