support@Free-Braindumps.com
Register Login
Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
CrowdStrike
Anthropic
All Vendors
  1. Home
  2. Exams
  3. Cisco
  4. 300-410

Free 300-410 Exam Braindumps
Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) Questions 273–280 (page: 36)

Updated On: 9-Jul-2026
Page 36 of 81
PDF with 640 Questions

Refer to the exhibit. An engineer configures DMVPN and receives the hub location prefix of 10.1.1.0/24 on R2 and R3. The R3 prefix of 10.1.3.0/24 is not received on R2, and the R2 prefix 10.1.2.0/24 is not received on R3. Which action resolves the issue?

  1. Split horizon prevents the routes from being advertised between spoke routers. It should be disabled with the no ip split-horizon eigrp 10 command on the Gi0/0 interface of R1.
  2. There is no spoke-to-spoke connection. DMVPN configuration should be modified with a manual neighbor relationship configured between R2 and R3 and confirmed by use of the show ip eigrp neighbor command.
  3. There is no spoke-to-spoke connection. DMVPN configuration should be modified to enable a tunnel connection between R2 and R3 and neighbor relationship confirmed by use of the show ip eigrp neighbor command.
  4. Split horizon prevents the routes from being advertised between spoke routers. It should be disabled with the command no ip split-horizon eigrp 10 on the tunnel interface of R1.

Answer(s): D



Refer to the exhibit. Which two configurations allow clients to get dynamic IP addresses assigned? (Choose two.)

  1. Configure access-list 100 permit udp any any eq 68 as the first line
  2. Configure access-list 100 permit udp any any eq 69 as the first line
  3. Configure access-list 100 permit udp any any eq 61 as the first line
  4. Configure access-list 100 permit udp any any eq 66 as the first line
  5. Configure access-list 100 permit udp any any eq 67 as the first line

Answer(s): A,E



Refer to the exhibit. The IT router has been configured with the Science VRF and the interfaces have been assigned to the VRF. Which set of configurations advertises Science-1 and Science-2 routes using EIGRP AS 111?


  1. router eigrp 111
    address-family ipv4 vrf Science autonomous-system 1
    network 192.168.1.0
    network 192.168.2.0
  2. router eigrp 111
    address-family ipv4 vrf Science
    network 192.168.1.0
    network 192.168.2.0
  3. router eigrp 111
    network 192.168.1.0
    network 192.168.2.0
  4. router eigrp 1 address-family ipv4 vrf Science autonomous-system 111
    network 192.168.1.0
    network 192.168.2.0

Answer(s): D



An engineer must override the normal routing behavior of a router for Telnet traffic that is destined to 10.10.10.10 from 10.10.1.0/24 via a next hop of 10.4.4.4, which is directly connected to the router that is connected to the 10.1.1.0/24 subnet. Which configuration reroutes traffic according to this requirement?

  1. access-list 100 deny tcp 10.10.1.0 0.0.0.255 host 10.10.10.10 eq 23
    !
    route-map POLICY permit 10
    match ip address 100
    set ip next-hop 10.4.4.4
    route-map POLICY permit 20
  2. access-list 100 permit tcp 10.10.1.0 0.0.0.255 host 10.10.10.10 eq 23
    !
    route-map POLICY permit 10
    match ip address 100
    set ip next-hop 10.4.4.4
    route-map POLICY permit 20
  3. access-list 100 permit tcp 10.10.1.0 0.0.0.255 host 10.10.10.10 eq 23
    !
    route-map POLICY permit 10
    match ip address 100
    set ip next-hop recursive
    10.4.4.4 route-map POLICY permit 20
  4. access-list 100 permit tcp 10.10.1.0 0.0.0.255 host 10.10.10.10 eq 23
    !
    route-map POLICY permit 10
    match ip address 100
    set ip next-hop recursive 10.4.4.4

Answer(s): C



Refer to the exhibit. An engineer must configure DMVPN Phase 3 hub-and-spoke topology to enable a spoke-to-spoke tunnel. Which NHRP configuration meets the requirement on R6?

  1. interface Tunnel1
    ip nhrp authentication Cisco123
    ip nhrp map multicast dynamic
    ip nhrp network-id 1
    ip nhrp holdtime 300
    ip nhrp redirect
  2. interface Tunnel 1
    ip address 192.168.1.1 255.255.255.0
    tunnel source e 0/1
    tunnel mode gre multipoint
    ip nhrp network-id 1
    ip nhrp map 192.168.1.2 192.1.20.2
  3. interface Tunnel1
    ip nhrp authentication Cisco123
    ip nhrp map multicast dynamic
    ip nhrp network-id 1
    ip nhrp holdtime 300
    ip nhrp shortcut
  4. Interface Tunnel 1
    ip address 192.168.1.1 255.255.255.0
    tunnel source e 0/0
    tunnel mode gre multipoint
    ip nhrp network-id 1

Answer(s): A



Refer to the exhibit. An engineer implemented CoPP but did not see OSPF traffic going through it. Which configuration resolves the issue?

  1. control-plane
    service-policy input COPP
  2. policy-map COPP class OSFP
    police 8000 conform-action transmit exceed-action transmit violate-action drop
  3. ip access-list extended OSFP
    permit ospf any any
  4. class-map match-all OSFP
    match access-group name OSFP

Answer(s): C



Refer to the exhibit. Site1 must perform unequal cost load balancing toward the segments behind Site2 and Site3. Some of the routes are getting load balanced but others are not. Which configuration allows Site1 to load balance toward all the LAN segments of the remote routers?



  1. Site3
    router eigrp 100
    variance 2
  2. Site2
    router eigrp 100
    variance 2
  3. Site2
    router eigrp 100
    variance 3
  4. Site1
    router eigrp 100
    variance 3

Answer(s): D



Refer to the exhibit. R1 and R2 use IGP protocol to route traffic between AS 100 and AS 200 despite being configured to use BGP. Which action resolves the issue and ensures the use of BGP?

  1. Configure distance to 100 under the OSPF process of R1 and R2
  2. Remove distance commands under BGP AS 100
  3. Remove distance commands under BGP AS 100 and AS 200.
  4. Configure distance to 100 under the EIGRP process of R1 and R2

Answer(s): C



  PDF
Viewing page 36 of 81
Viewing questions 281 - 288 out of 640 questions


Post your Comments and Discuss Cisco 300-410 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!