support@Free-Braindumps.com
Register Login
Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
CrowdStrike
Anthropic
All Vendors
  1. Home
  2. Exams
  3. Cisco
  4. 300-615

Free 300-615 Exam Braindumps
Troubleshooting Cisco Data Center Infrastructure (DCIT) Questions 76–80 (page: 17)

Updated On: 10-Feb-2026
Page 17 of 51
PDF with 291 Questions

An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?

  1. Install Server Firmware, then Install Infrastructure Firmware.
  2. Install Hypervisor Firmware, then Install Infrastructure Firmware.
  3. Install Infrastructure Firmware, then Install Hypervisor Firmware.
  4. Install Infrastructure Firmware, then Install Server Firmware.

Answer(s): D


Reference:

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/ Firmware-Mgmt/3-1/b_UCSM_GUI_Firmware_Management_Guide_3_1/b_UCSM_GUI_Firmware_Management_Guide_3_1_chapter_011.html#concept_4F52361A2A7D4459B64BE9 3BC9CA566A



A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?

  1. 1. Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
    2. Verify that at least two physical cables between the IOM and fabric interconnect function properly.
    3. Check for runtime link down status.
    4. Reseat the affected IOM.
  2. 1. Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
    2. Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
    3. Check for runtime link down status.
    4. Reseat the affected IOM.
  3. 1. Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
    2. Verify that at least two physical cables between the IOM and fabric interconnect function properly.
    3. Check for runtime link down status.
    4. Reseat the affected IOM.
  4. 1. Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
    2. Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
    3. Check for runtime link down status.
    4. Reseat the affected IOM.

Answer(s): B


Reference:

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooting_chapter_01001.html



Refer to the exhibit. A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues. What is the role of the interface Eth1/7?

  1. IOM network interface
  2. fabric interconnect uplink interface
  3. IOM host interface
  4. server interface

Answer(s): B



A system administrator adds two vNICs to an existing service profile that is used to run a vSphere environment to support disjoint Layer 2 network connectivity. However, after the server is rebooted, the host is not accessible on the network. Which action resolves the issue?

  1. Build a new service profile with the desired network configuration.
  2. Remove all existing vNICs and add them in the desired order.
  3. Create a vNIC placement policy to avoid adapter renumbering.
  4. Add the disjoint Layer 2 VLANs to an existing vNIC rather than adding new vNICs.

Answer(s): C


Reference:

https://www.cisco.com/c/en/us/support/docs/hyperconverged-infrastructure/hyperflex-hx- dataplatform/213665-troubleshoot-hx-nodes-pci-address-reorde.html



Refer to the exhibits. An engineer troubleshoots switch N5K1, which fails to receive traffic from the file server. Which set of actions resolves this problem?

  1. Bind native VLAN 10 with Ethernet1/10 and allow VSAN 101 in trunk configuration.
  2. Assign native VLAN 10 with vfc111 and allow VLAN 1101 in trunk configuration.
  3. Bind native VLAN 10 with Ethernet10/1/1 and allow VLAN 10 in trunk configuration.
  4. Assign native VLAN 10 with fc2/1 - 2 and allow VLAN 10 in trunk configuration.

Answer(s): C



  PDF
Viewing page 17 of 51
Viewing questions 81 - 85 out of 291 questions


Post your Comments and Discuss Cisco 300-615 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!