Cisco 350-501 Exam Prep
Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (Page 4 )

1. Ingestion Lambda receives requests from API Gateway and places messages in an SQS queue.
2. Processing Lambda is triggered by the queue and loads records into Aurora PostgreSQL.

• Decoupling: API request handling is separated from database loading.
• Buffering: SQS absorbs bursts when incoming traffic exceeds the database’s processing capacity.
• Controlled concurrency: Configure the SQS-triggered Lambda’s concurrency and batch size to avoid overwhelming Aurora or exhausting database connections.
• Automatic retries: Messages that fail processing can return to the queue and be retried. A dead-letter queue can capture persistent failures.
• Lower operational effort: The solution remains serverless and avoids managing EC2 servers or Kubernetes clusters.

• A: EC2 and Tomcat add server-management overhead.
• B: DynamoDB/DAX would require changing the database model and does not solve the Aurora ingestion design.
• C: SNS is useful for notifications and fanout, but SQS is better for durable buffering and backpressure in this producer-consumer workflow.

• A — conformant: Incorrect because one explicit requirement is violated.
• B — consistent: “Consistent” is not sufficient where the implementation contradicts a mandatory specification. The RPC mechanism is covered by the architecture, and the implementation differs from it.
• C — consistent: Incorrect reasoning: the RPC mechanism does have a defined architectural requirement, so conformance must be assessed.
• D — non-conformant: Correct because the implementation fails to follow the specified RPC/threading requirement.

• Guiding principles
• Governance
• Service value chain
• Practices
• Continual improvement

• Guiding principles: Recommendations that guide decisions and actions; they do not describe the entire system.
• Four dimensions: Perspectives used to ensure a balanced approach to service management.
• Service relationship: Describes cooperation between a service provider and service consumer, rather than the whole value-creation system.

• Valor maior: mais aderência às instruções e aos detalhes descritos.
• Valor menor: mais liberdade criativa e resultados potencialmente mais variados.
• Valor excessivamente alto: pode causar artefatos ou imagens menos naturais.

• Aumentar o número de passos de geração: pode melhorar qualidade e refinamento, mas não é o principal controle de especificidade do prompt.
• MASK_IMAGE_BLACK: relaciona-se ao uso de máscara em geração ou edição de imagens, não à especificidade textual.
• Prompt strength: é mais associado à força do prompt em processos como image-to-image; nesta questão, o parâmetro diretamente ligado à aderência textual é o CFG scale.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• Multiple nodes: Data is replicated several times in the primary region.
• Separate geography: A copy is asynchronously replicated to a secondary Azure region.
• Readable secondary: RA-GRS provides read-only access to the secondary replica, even when the primary region is available.

• GRS: Replicates to another region but the secondary copy isn’t normally readable.
• ZRS: Replicates across availability zones in the same region, not a separate geographic region.
• LRS: Keeps replicas within a single datacenter or region and provides no geographic redundancy.

• Application management: Controls which apps can be installed or used; it does not remove existing data after theft.
• Full-disk encryption: Protects data when the device is powered off or locked, but it may not help if the attacker has already unlocked the device.
• Containerization: Separates corporate data from personal data, but the attacker may still access the corporate container using the stolen credentials.

• Data loss prevention (DLP): Helps detect or prevent unauthorized data transfers, but does not directly protect data on a stolen, powered-off laptop.
• Operating system hardening: Reduces vulnerabilities and attack surface, but does not adequately protect stored data if the device is stolen.
• Boot security: Helps prevent unauthorized operating systems or boot media from loading. It supports device security but is not the primary solution for protecting the data itself.

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.

• The Subscribe to Reports user permission.
• At least Viewer access to the report’s folder.
• Access to the report itself.

• Subscribe to Reports: Run Reports is not the relevant Salesforce permission.
• Chatter Subscribe to Reports is not a Salesforce permission.
• Set Running User relates to configuring the user whose permissions determine report results—not subscribing to a report.

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

• Scheduling overlapping working hours for critical collaboration
• Assigning independent tasks that can proceed asynchronously
• Adding clear handoffs between offices
• Documenting decisions, questions, and required inputs
• Building appropriate time into the schedule for responses

• BCP: Maintains essential business operations during and after disruption. It is broader than IT recovery, but the question focuses on restoring the destroyed data center.
• Communication plan: Defines how the organization communicates with staff, the public, and other stakeholders.
• IRP: Handles security incidents such as malware, unauthorized access, or data breaches—not physical disaster recovery.

• Disaster recovery backups
• Long-term backup retention
• Data archiving that still needs occasional access

• Multi-Regional Storage: Intended for frequently accessed data needing broad geographic availability; it costs more.
• Regional Storage: Suitable for frequently accessed data within one region.
• Nearline Storage: Intended for data accessed roughly once per month, such as monthly backups.
• Coldline Storage: Better fit for backups accessed only during a disaster or occasional recovery event.

• Subject: The entity that initiates an action—here, Derrick/user account.
• Object: The resource being accessed— the file.
• Action: Reading the file.

• Use one Azure AD directory for the organization.
• Separate divisions with subscriptions and/or resource groups.
• Assign each division’s administrator appropriate Azure role-based access control (RBAC) permissions, scoped to their subscription or resource group.

• Review iteration length: Changing duration does not resolve unclear requirements.
• Limit work in progress: Useful when excessive multitasking is the problem, but it does not directly clarify requirements.
• Review individual performance: The issue is a process and backlog-quality problem, not necessarily an individual performance problem.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• Matching hashes: The software is unchanged.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality.
• Baselines: Define approved configurations or normal performance.
• Tokenization: Replaces sensitive data with tokens.

• The files are stored in a document library, which is exposed through the SharePoint Folder connector.
• The connector returns file metadata, including Folder Path, Name, and Content.
• In Power Query, filter Folder Path so only files in the manufacturing reports folder are retained.
• You can then combine the remaining Excel files because they all have the same structure.

• SharePoint List is for SharePoint lists, not document-library files.
• Combine & Load combines files immediately, before you filter to the required folder, and may include unwanted files.
• Transform gives you the opportunity to filter the file list first, which is more efficient and targeted.

• Authentication — verifies who the user is.
• Authorization — determines what the authenticated user is allowed to access.
• Accounting — records session activity, such as login time and resource usage.

• CIA — confidentiality, integrity, and availability; core security objectives.
• ACL — access control list; rules that permit or deny traffic or access.
• PEM — Privacy Enhanced Mail, an older email security standard.

• nomes de pessoas;
• organizações;
• locais;
• datas;
• números de processos;
• leis ou contratos.

• NER = identifica informações específicas e classificáveis.
• Sumarização = reduz um documento e apresenta seus pontos principais.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• administrators — Full access to switch configuration and REST API functions; excessive for this requirement.
• sysadmin — Intended for highly privileged system administration, not basic monitoring.
• helpdesk — More limited and focused on troubleshooting/support functions; it does not match the stated default role and level-1 requirement as directly.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• Tactics: The attacker’s overall goal, such as gaining persistence or exfiltrating data
• Techniques: The methods used to achieve that goal
• Procedures: The specific implementation or sequence of actions

• IP addresses and hash values: Useful indicators, but they can change quickly.
• Indicators of compromise: TTPs may help identify IOCs, but their main value is describing behavior.
• Tools: Attackers can replace tools or use legitimate administrative utilities.

• If the Facebook user is new, Salesforce invokes createUser.
• If the user already exists, Salesforce can invoke updateUser.
• The handler can read the latest data from Facebook, such as name, email, or other profile attributes, and update the corresponding Salesforce user.

• B: A scheduled job is unnecessary and would not provide real-time synchronization during authentication.
• C: A Facebook signed request is not the standard mechanism for updating Salesforce user records in this authentication-provider setup.
• D: SAML Just-in-Time provisioning applies to SAML identity providers, not Facebook OAuth authentication.

• Due Date
• Order Date
• Delivery Date

DAX 
Order Date = 'Due Date' 
Delivery Date = 'Due Date'

• Due Date[Date] ? Sales[Due Date]
• Order Date[Date] ? Sales[Order Date]
• Delivery Date[Date] ? Sales[Delivery Date]

• Matching hashes suggest the file has not changed.
• Different hashes indicate that the file was modified, whether authorized or unauthorized.

• Backup: Helps recover the previous version but does not identify or stop unauthorized changes.
• File labels: Classify or mark files; they do not verify integrity.
• Security audit: May discover weaknesses or improper changes, but is periodic and not a direct technical integrity control.

1. Define Power Platform DLP policies

1. Add custom prompt modifications

1. Conduct adversarial testing

• Microservices: An application-design approach that divides an application into smaller services. It does not inherently reduce the number of operating systems.
• Virtualization: Creates virtual machines, but each VM generally requires its own complete operating system. This improves isolation but does not minimize OS instances as effectively.
• Infrastructure as code: Uses code to automate infrastructure deployment and configuration. It improves consistency but does not determine how many operating systems are used.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• The connecting host keeps the private key securely.
• The destination host stores the corresponding public key in its authorized keys.
• Authentication can occur without a person entering credentials each time.
• SSH also provides encrypted communication and host authentication.

• Biometric: Requires a human user and is difficult to automate.
• Smart card: Often requires user interaction or card access.
• Hard-coded password: Unsafe because passwords stored in scripts or applications can be exposed, reused, or difficult to manage securely.

• Approve major information security policies
• Allocate funding and resources
• Set the organization’s risk appetite
• Ensure security supports business objectives

• Evaluating vendors is generally handled by security, procurement, or technical teams.
• Assessing risks is typically performed by security and risk-management professionals, with management accepting or prioritizing the risks.
• Monitoring regulatory adherence is usually handled by compliance, audit, or security functions.

• A. Microsoft 365 group with Assigned membership
• C. Microsoft 365 group with Dynamic User membership

Why?

• Assigned membership: You explicitly add User1, User2, and User3.
• Dynamic User membership: Membership is automatically determined by a rule based on user attributes.

Why the other options are incorrect

• B and D: Security groups do not support the Microsoft 365 group expiration policy.
• E: Dynamic Device groups are intended for devices, not these users, and are also security groups.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Planning — identify the need, objectives, resources and feasibility.
• Analysis — determine user requirements and examine the existing system.
• Design — specify how the new system will work.
• Implementation — build, test, install and introduce the system.
• Maintenance/evaluation — monitor and improve the system after implementation.

• Customers access the portal without needing a full Dynamics 365 license.
• They submit case information through portal forms.
• The submitted data is stored in Dataverse tables, such as the Case table.
• Security is controlled using web roles and table permissions, so customers can access only appropriate records.

• Dynamics 365 Connector — connects apps to Dynamics 365 data but is not the portal’s underlying data platform.
• Microsoft SharePoint — useful for documents and collaboration, not the standard case-management data source for portals.
• Microsoft Azure Storage — stores files or other data, but is not the native portal business-data platform.

• s3:GetObject for the relevant objects
• s3:ListBucket if listing is required
• Appropriate bucket and object resource permissions

• B: Making the bucket public is insecure and unnecessary.
• C: Prompt engineering cannot override AWS IAM or encryption permissions.
• D: Data sensitivity does not determine whether the role can access it.

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

1. Modify the database subnet NACL inbound rules to allow traffic from the new web subnet’s CIDR block on the MySQL port (3306).
2. Modify the database subnet NACL outbound rules to allow return traffic to the new web subnet’s CIDR block on the required ephemeral port range.

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• A limited lifetime
• Permissions defined by an IAM role or policy
• The ability to access AWS APIs without using long-term IAM user credentials

• Amazon API Gateway — Builds and manages APIs; it does not generally issue AWS credentials for applications.
• IAM users — Usually use long-term credentials, which are less suitable for applications.
• IAM instance profiles — Provide temporary role credentials to applications running on EC2 instances, but are specifically tied to EC2. The broader requirement described is best met by AWS STS.

• Disable default accounts: Default or unused accounts may have predictable names or credentials and can be abused by attackers. They should be disabled, removed, or secured with strong credentials where necessary.
• Remove unnecessary services: Every running service can contain vulnerabilities or provide an entry point. Removing services the server does not need reduces exposure.

• Add the server to the asset inventory: Important for asset management, but it does not directly harden the system.
• Document default passwords: Default passwords should be changed or disabled—not recorded for continued use.
• Send logs to the SIEM: Supports monitoring and detection, rather than directly reducing the attack surface.
• Join the corporate domain: A deployment/configuration decision, not inherently a hardening measure.