[Cisco Equipment and Related Hardware]When should a crossover UTP cable be used instead of a straight-through cable when connecting network devices?
Answer(s): A
A crossover UTP (Unshielded Twisted Pair) cable is used to connect two similar devices directly. This includes:Switch to switchRouter to routerPC to PCThe crossover cable reverses the transmit and receive pairs, allowing for proper communication between like devices without the need for an intermediary device. Conversely, a straight-through cable is used to connect dissimilar devices, such as:PC to switchRouter to switchPC to routerThis cable maintains the same wiring on both ends, suitable for connecting different types of devices. Therefore, when connecting electrically like devices, a crossover cable is appropriate.
Supporting Cisco Devices for Field Technicians (FLDTEC) Cisco Equipment and Related Hardware
[Cisco IOS Software Basics]How many bits are borrowed from the default host portion of the address to create subnets in a Class B network with a subnet mask 255.255.255.0?
Answer(s): D
In a Class B network, the default subnet mask is 255.255.0.0, which allocates:16 bits for the network portion16 bits for the host portionWhen the subnet mask is changed to 255.255.255.0, it becomes:24 bits for the network portion8 bits for the host portionThis indicates that 8 bits have been borrowed from the host portion to create additional subnets. Borrowing bits allows for the division of the original network into smaller sub-networks, enhancing organization and security within the network.
Supporting Cisco Devices for Field Technicians (FLDTEC) Cisco IOS Software Basics
[Cisco Equipment and Related Hardware]What is the function of an access layer device?
Answer(s): B
In the hierarchical network design model, the access layer is the first layer and serves as the entry point for end-user devices to connect to the network. This layer connects user devices such as PCs, IP phones, wireless access points, printers, and scanners to the network. It facilitates the initial connection between end-user devices and the network infrastructure. The access layer also enforces security policies and provides services such as VLAN membership, port security, and Quality of Service (QoS).Options A, C, and D refer to functions typically associated with the core or distribution layers, or with WAN connectivity, rather than the access layer.
[Wireless Device Support]Which term describes the physical range of radio frequency coverage provided by an access point in a wireless topology?
In wireless networking, the Basic Service Area (BSA) refers to the physical area of radio frequency coverage provided by an access point (AP) in a Basic Service Set (BSS). The BSA defines the coverage area where wireless clients can connect to the network through the AP. The size and shape of a BSA depend on various factors, including the AP's transmit power, antenna type, and physical environment.Option A, the Service Set Identifier (SSID), is the network name broadcast by the AP. Option C, Wireless LAN (WLAN), refers to the overall wireless network. Option D, Wireless LAN Controller (WLC), is a device that manages multiple APs in a network.
Supporting Cisco Devices for Field Technicians (FLDTEC) Wireless Device Support
[Device Configuration and Verification]Which two configuration parameters are most critical to ensure optimal performance when configuring a network port for a newly installed IP phone in an enterprise environment? (Choose two.)
Answer(s): A,D
When configuring a network port for a newly installed IP phone, two critical parameters to ensure optimal performance are:VLAN Assignment: Assigning the correct VLANs is essential for segregating voice and data traffic. Typically, a separate voice VLAN is configured to prioritize voice traffic and enhance security. Power over Ethernet (PoE): PoE allows the switch to supply power to the IP phone over the same Ethernet cable used for data transmission. This eliminates the need for separate power supplies and simplifies installation.While QoS classification (Option E) is important for prioritizing voice traffic, it is typically configured at a broader network level. Link aggregation (Option B) and Spanning Tree Protocol (Option C) are more relevant to network redundancy and loop prevention, respectively, and are not directly critical for the initial configuration of an IP phone port.
Supporting Cisco Devices for Field Technicians (FLDTEC) Device Configuration and Verification
Post your Comments and Discuss Cisco 800-150 exam dumps with other Community members:
No discussions yet for this exam. Be the first to share your experience and help others prepare!
💬 Did you find this helpful?
Thank you for sharing! Your feedback helps the community.