Which deployment scenarios are Cisco 8000 Series routers primarily designed for?
Answer(s): B
Cisco 8000 Series routers are primarily designed for service provider and web-scale networks, offering high-performance routing capabilities to handle large-scale, high-bandwidth environments typically found in service provider infrastructures and data centers.
DRAG DROP (Drag and Drop is not supported)[Cisco IOS Software Basics]Refer to the exhibit. Drag and drop the steps in the TCP/IP encapsulation process from the left onto the corresponding layer on the right.
Answer(s): A
The FLDTEC training describes the TCP/IP encapsulation as a step-by-step process where data is passed down through the layers of the TCP/IP model:Application Layer: User data is created (email, file, request) and the application layer adds the application header, creating a data payload.Transport Layer: The data is segmented. Each segment receives a transport-layer header (TCP/UDP), enabling proper sequencing and error handling at the destination. Internet Layer: Segments are encapsulated into packets (IP datagrams), with an IP header added to facilitate routing between networks.Link Layer: Finally, packets are framed with Layer 2 headers and trailers (including the Frame Check Sequence for error detection), creating a frame ready to be transmitted on the physical medium. This layered encapsulation ensures interoperability and troubleshooting clarity, which is why it is emphasized in FLDTEC's IOS Software Basics module.
[Cisco Equipment and Related Hardware]Which Cisco switch series is designed to handle the combined responsibilities of core and distribution layers in a converged architecture?
Answer(s): D
The Cisco Catalyst 9000 Series is engineered to address the evolving needs of modern enterprise networks by integrating the functionalities of both the core and distribution layers into a unified, converged architecture. This series offers advanced capabilities such as high-speed data forwarding, enhanced security features, and support for automation and programmability, making it suitable for scalable and efficient network designs.The Catalyst 9000 Series includes models like the Catalyst 9500 and 9600, which are optimized for core and distribution roles, providing high throughput and reliability. These switches support advanced features like Software-Defined Access (SD-Access) and are designed to meet the demands of cloud-scale and security-focused environments.Wikipedia+2Cisco+2Cisco+2 In contrast, the Meraki MS400 Series (Option A) is tailored for cloud-managed aggregation and lacks the comprehensive feature set required for core functionalities. The Catalyst 6500 E-Series (Option B), while historically significant, is considered a legacy platform and may not support the latest advancements in network convergence. The Catalyst 1300 Series (Option C) is designed for small to medium-sized businesses and is not intended for core or distribution layer deployments.
Supporting Cisco Devices for Field Technicians (FLDTEC) Cisco Equipment and Related Hardware
DRAG DROP (Drag and Drop is not supported)[Device Configuration and Verification]Drag and drop the configuration tasks for restoring software from the left onto the corresponding commands on the right.
These command associations are part of Cisco IOS essentials taught in FLDTEC's "Device Configuration and Verification" topic. Here's how each command functions:show running-configDisplays the active configuration stored in RAM.This command is used to verify the current settings on a Cisco device.copy running-config startup-configSaves the current running configuration to NVRAM, ensuring the configuration persists after a reboot.This is critical after making changes to device settings.copy tftp: running-configLoads a configuration from a TFTP server and applies it to the current running configuration.Often used during remote device setup or restoration.copy usbflash0:backup.cfg running-configRestores a saved configuration file from a USB drive.Useful in field operations where physical backup media is used during maintenance.These tasks are routine for field technicians performing configuration backups, restorations, and diagnostics in Cisco environments.
[Maintenance and RMA Procedures]Which command is used to download a copied configuration file from a TFTP server to merge it with the running configuration of a replacement Cisco device?
Answer(s): C
The command copy tftp: running-config is used to retrieve a configuration file from a TFTP server and merge it with the current running configuration of a Cisco device. This operation is additive, meaning it integrates the new configuration commands into the existing running configuration without removing any pre-existing commands unless explicitly overridden. This method is particularly useful when restoring configurations to a replacement device, as it allows for the seamless integration of necessary settings without disrupting the current operational state. In contrast, using copy tftp: startup-config would overwrite the startup configuration file, which could lead to unintended consequences upon the next device reload. The options load tftp: running-config and merge tftp: running-config are not valid Cisco IOS commands.
Supporting Cisco Devices for Field Technicians (FLDTEC) Maintenance and RMA ProceduresCisco
Post your Comments and Discuss Cisco 800-150 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the 800-150 content, but please register or login to continue.