Free CWDP-305 Exam braindumps download (CWDP-305 exam dumps Free)

QUESTION: 86

An associated STA detects a new BSS with the same SSID as the STA's current BSS. The new BSS uses a different IP subnet than the current BSS.
If the STA is configured to use 802.1X/EAP preauthentication, what is likely to occur?

The STA will not attempt to preauthenticate because the new BSS uses a different IP subnet.
The STA will attempt to preauthenticate, but fail because the new BSS uses a different data-link broadcast domain.
The STA will attempt to preauthenticate and succeed if DHCP is supported on the new subnet.
The STA will attempt to preauthenticate and succeed if IP Mobility is enabled on the AP or WLAN controller.

Answer(s): B

Show Answer Next Question

QUESTION: 87

Given: A WLAN controller is connected to ABC Company's core layer 3 Ethernet switch with an IEEE 802.1Q trunk connection. The WLAN
controller's native
VLAN is VLAN 6 and its IP address is 10.0.14.2 /24. Lightweight APs supporting centralized forwarding are connected to the network on VLANs 7,
8, and 9, and they each build a Layer 3 tunnel back to the WLAN controller's IP address. The dynamically assigned IP addresses received by each AP from a DHCP server will be

________________.

Associated with the VLAN on which they are connected.
Associated with the native VLAN of the WLAN controller.
Associated with VLAN 1, the default VLAN for new APs
Associated with a non-routable VLAN until the MAC address of the AP is removed from the controller's MAC filter

Answer(s): A

Show Answer Next Question

QUESTION: 88

What is the purpose of DHCP Option 43, and how is it used with WLANs?

It provides clients with a temporary IP address on a restricted VLAN until 802.1X authentication is completed. Then the client receives its long-term IP address.
It provides IP address bindings for specific network nodes that require long-term IP address assignments. WLAN controllers are configured to use Option 43 to receive long-term IP address leases that are centrally managed with DHCP.
It supports vendor-specific IP address attributes for node discovery purposes. APs use Option 43 with vendor class identifiers to obtain the
IP address of a centralized WLAN controller.
It integrates a DHCP server with AAA servers and user databases to dynamically assign IP addresses to client devices. During 802.1X, the
AAA server uses

Answer(s): C

Show Answer Next Question

QUESTION: 89

You deployed an AP and installed its antenna, and you now need to set the AP transmit power. Given a desired EIRP of 21 dBm, and an antenna gain of 5.85 dBd connected through 25 feet of cable with a loss specification of 4 dB/100 feet. Assuming that there is no significant loss from the connectors, what should be the transmit power level for this AP?