Free CWDP-305 Exam Braindumps
Certified Wireless Design Professional Questions 111–115 (page: 24)

Given: In a site survey deliverable report, you are expected to explain the spectrum measurements taken at the customers site.
What portion of a spectrum analyzer view can be used to determine if a given channel is too active for use as the active channel for a new AP?

You are testing a VoWLAN deployment, and your communication measurements show a certain amount of lost packets.
What would be an acceptable packet error rate value to still provide acceptable call quality?

You are site surveying a network for VoWiFi. You have positioned an AP for a manual survey and are moving away from the AP with a phone in
Survey Mode in your hand and you are reading the RSSI value of the signal received from the AP. You have previously determined that the noise floor was approximately -94 dBm on this floor of the building. The phones documentation does not specify a recommended RSSI or SNR value for best performance.
Based on the information provided and the type of device (VoWiFi phone) you are deploying, what minimum RSSI should you plan for in all areas you are monitoring and where VoWiFi service is desired?

What statement is true of a WLAN design that supports Real-Time Location Services (RTLS) with 802.11 RFID asset tags?

In this question, you will compare the mobility processes of a network that supports WPA2-Personal and WPA2-Enterprise. Assume the use of a
15-character
ASCII passphrase for WPA2-Personal and EAP-TTLS/MSCHAPv2 with WPA2-Enterprise. Also, assume that proprietary roaming protocols are not supported.
When a device transitions from one BSS to another within the same ESS, what step must be performed in the WPA2-Enterprise transition that are not performed in the WPA2-Personal transition?