Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
Splunk
ServiceNow
All Vendors
  2. Home
  3. Exams
  4. CWNP
  5. CWDP-305

CWNP CWDP-305 Exam
Certified Wireless Design Professional (Page 9 )

Updated On: 12-Jan-2026
Page 9 of 70
PDF with 341 Questions

What service must be implemented on your customer's network to authenticate users against an LDAP database before granting access to the WLAN infrastructure?

  1. SSH
  2. RADIUS
  3. SFTP
  4. TLS

Answer(s): B



What is the best method of gathering attenuation measurements from wall materials?

  1. After measuring the RSSI in free space 5 meters (16.5 feet) apart, put an AP 4 meters (13 feet) away from the wall on one side and your measuring device 1 meter (3.2 feet) away from the wall minus the width of the wall. Take measurements and compare the difference.
  2. Use the pre-built attenuation values in the predictive design tools as they are more accurate than free-space metrics gathered with commercial devices.
  3. After measuring the RSSI in free space 1 meter (3 feet) apart, put an AP 0.32 meters (1 feet) away from the wall on one side and your measuring device 0.67 meters (2 feet) away from the wall on the other side. Take measurements and compare the difference.
  4. Look on the Internet for attenuation values for each one of the materials that might attenuate the Wi-Fi signal using the material providers' websites.

Answer(s): C



Which type of authentication and encryption method is mandatory for Voice Enterprise certified devices as specified by the Wi-Fi Alliance?

  1. WPA2/AES Personal
  2. WPA2/TKIP Enterprise
  3. WPA2/AES Enterprise
  4. WPA/TKIP Personal

Answer(s): C



Which document provides detailed instructions for installation technicians on how to properly mount and configure access points (APs)?

  1. Hold Harmless
  2. Statement of Work
  3. Bill of Materials
  4. Physical installation guide

Answer(s): D



In addition to a copy of your design, which tools should you provide to ensure the installation team correctly deploys access points (APs) in the specified locations within a multi-floor indoor design?

  1. GPS and a map
  2. RF spectrum analyzer and packet capturing software
  3. Ladder and a pen
  4. Camera and marking tools

Answer(s): C



Viewing page 9 of 70
Viewing questions 41 - 45 out of 341 questions



Post your Comments and Discuss CWNP CWDP-305 exam prep with other Community members:

Join the CWDP-305 Discussion