What is the most effective method for testing roaming in relation to 802.11 VoIP handsets?
Answer(s): C
The most effective method for testing roaming in relation to 802.11 VoIP handsets is to place a call with the handset and move around the facility to test quality during roaming. This method allows you to evaluate the actual performance and user experience of VoIP calls over wireless networks, as well as identify any potential issues such as signal strength, interference, latency, jitter, packet loss, or handoff delays. A spectrum analyzer can only show you the RF activity during a VoIP call, but not how it affects the voice quality or roaming behavior. A protocol analyzer can capture the traffic generated when a laptop roams, but it cannot simulate the characteristics of a VoIP handset such as battery life, antenna design, codec support, or QoS features. A built-in roaming monitor is not a common feature in all VoIP handsets, and it may not provide accurate or comprehensive information about the roaming process.
[CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 487; [Voice over Wireless LAN 4.1 Design Guide], page 6-19.
You are performing a post-implementation validation survey. What basic tool can be used to easily locate areas of high co-channel interference?
Answer(s): D
A Wi-Fi scanner is a basic tool that can be used to easily locate areas of high co-channel interference. A Wi-Fi scanner is a software application that can run on a laptop, tablet, smartphone, or other device that has a Wi-Fi adapter. A Wi-Fi scanner can scan the wireless environment and display information about the detected access points and client stations, such as their SSID, BSSID, channel, signal strength, security, and data rate. A Wi-Fi scanner can also show the channel utilization and overlap of different access points, which can indicate the level of co-channel interference. Co- channel interference is a type of interference that occurs when multiple access points use the same or adjacent channels within the same coverage area. Co-channel interference can reduce the throughput and performance of the WLAN, as the access points and client stations have to contend for the channel access and avoid collisions. To identify areas of high co-channel interference, a Wi-Fi scanner can be used to measure the signal strength and channel utilization of different access points and compare them with a threshold or a baseline. Alternatively, a Wi-Fi scanner can also use a color- coded heat map to visualize the co-channel interference level in different locations.
1, Chapter 7, page 279; 2, Section 4.3
During a post-implementation survey, you have detected a non-802.11 wireless device transmitting in the area used by handheld 802.11g scanners. What is the most important factor in determining the impact of this non-802.11 device?
Airtime Utilization is a per-channel statistic that defines what percentage of the channel is currently being used, and what percentage is therefore free. Airtime usage can come from: Data traffic to and from client devices. Interference from WiFi and non-WiFi sources. Management overhead from APs and client devices. https://wyebot.com/2019/06/06/understanding-airtime-utilization/
A non-802.11 device is suspected of causing interference on the WLAN. You are not certain of the location or type of device. What is the best solution for locating this non-802.11 device?
A laptop-based spectrum analyzer with a directional antenna is the best solution for locating a non- 802.11 device that is suspected of causing interference on the WLAN. A spectrum analyzer is a device or a software application that can measure and display the frequency spectrum of electromagnetic signals in a given range. A spectrum analyzer can show the amplitude, frequency, bandwidth, modulation, and other characteristics of different signals in the spectrum, which can help identify their sources and types. A spectrum analyzer can also detect non-802.11 devices that may cause interference on the WLAN, such as microwave ovens, cordless phones, Bluetooth devices, or radar systems. A laptop-based spectrum analyzer is a software application that runs on a laptop computer and uses an external USB adapter as its RF interface. A laptop-based spectrum analyzer has the advantage of being portable, flexible, and cost-effective compared to a hardware-based spectrum analyzer. A directional antenna is an antenna that radiates or receives RF signals more strongly in one direction than in others. A directional antenna has a high gain and a narrow beamwidth, which means it can focus the RF energy in a specific direction and reduce the interference from other directions. A directional antenna can also increase the range and sensitivity of the RF signal detection. To locate a non-802.11 device that is causing interference on the WLAN, a laptop-based spectrum analyzer with a directional antenna can be used to perform a technique called RF hunting or triangulation. This technique involves pointing the directional antenna in different directions and observing the signal strength and characteristics of the interfering device on the spectrum analyzer. By moving around and changing the direction of the antenna, the location of the interfering device can be estimated based on where the signal strength is highest and most consistent.
1, Chapter 7, page 282; 2, Section 4.3
You are tasked with performing a throughput test on the WLAN. The manager asks that you use open source tools to reduce costs. What open source tool is designed to perform a throughput test?
Answer(s): A
iPerf is an open source tool that is designed to perform a throughput test on the WLAN. iPerf is a cross-platform command-line tool that can measure the bandwidth and quality of network links by generating TCP or UDP traffic between two endpoints. iPerf can run as either a server or a client mode, depending on whether it receives or sends traffic. iPerf can also report various metrics of network performance, such as throughput, jitter, packet loss, delay, and TCP window size. To perform a throughput test on the WLAN using iPerf, one device needs to run iPerf in server mode and another device needs to run iPerf in client mode. The devices need to be connected to the same WLAN network and have their IP addresses configured properly. The device running iPerf in client mode needs to specify the IP address of the device running iPerf in server mode as well as other parameters such as protocol, port number, duration, interval, bandwidth limit, packet size, etc. The device running iPerf in server mode will listen for incoming connections from the client device and send back acknowledgments or responses depending on the protocol used. The device running iPerf in client mode will send traffic to the server device according to the specified parameters and measure the network performance. The device running iPerf in client mode will display the results of the throughput test at the end of the test or at regular intervals during the test. The results can show the average, minimum, maximum, and instantaneous throughput of the network link, as well as other metrics such as jitter, packet loss, delay, and TCP window size.
1, Chapter 7, page 287; 2, Section 4.3
Post your Comments and Discuss CWNP CWNA-109 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the CWNA-109 content, but please register or login to continue.