Databricks Databricks Certified Associate Developer for Apache Spark 3.0 Exam Prep
Certified Associate Developer for Apache Spark (Page 4 )

• In Spark, an executor is a JVM that can have multiple cores. Each task can consume some CPUs (spark.task.cpus).
• The executor’s resources are effectively partitioned into slots, where each slot can run one task. The number of slots per executor is roughly spark.executor.cores / spark.task.cpus.
• Therefore, multiple tasks can run in parallel within the same executor (via these slots). So the statement “Tasks run in parallel via slots” is correct.

• A: A slot is not another name for an executor; a slot is a unit inside an executor.
• B: There’s no requirement that there must be fewer executors than tasks; tasks can be scheduled over time across the available slots.
• C: An executor can run more than one core; it’s not limited to a single core.
• D: There isn’t a rule that there must be more slots than tasks; tasks can wait if slots aren’t available, and you can have equal or even fewer slots than concurrent tasks.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• 16 VMs: one failure loses 25 GB and 10 cores—only 6.25% of memory.
• 8 VMs: one failure loses 12.5% of memory.
• 4 VMs: one failure loses 25%.
• 1 VM: one failure loses the entire application environment.

• Restrict a port to a defined number of MAC addresses
• Use statically configured or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious traffic but is not the primary control for switch-port MAC limits.
• NGFW: Filters routed network traffic, not the switch’s CAM/MAC address table directly.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

1. Define Power Platform DLP policies

1. Add custom prompt modifications

1. Conduct adversarial testing

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

• Customers may boycott V’s products.
• Supermarket customers may stop buying from V.
• Investors may view V as having higher legal, ethical and reputational risk.
• V could face fines, lawsuits, contract losses and higher costs.
• Expected future profits may fall.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• How quickly the vendor must respond to an incident or request
• Target resolution times
• Availability or uptime requirements
• Performance metrics and penalties for not meeting them

• SOW (Statement of Work): Describes the project’s scope, tasks, deliverables, and timeline.
• MOA (Memorandum of Agreement): Documents a formal agreement to cooperate or perform specific activities.
• MOU (Memorandum of Understanding): Records a mutual understanding or intent, often less binding than a contract.

• Periodic vulnerability assessments: Identify technical weaknesses but do not establish governance or ensure risks are managed.
• Established information security metrics: Help measure performance and report status, but measurement alone does not make governance effective.
• Advanced security technologies: Support security operations, but governance is primarily about direction, accountability, decision-making, and alignment with business objectives.

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• Espionage: Stealing confidential information, often for a competitor or government.
• Data exfiltration: Unauthorized transfer of data outside the organization. This could occur, but the question focuses on using unapproved access methods.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Employees using technology or access methods outside the organization’s approved security controls.

• Encryption to preserve confidentiality
• Integrity protection to detect alteration
• Authentication of the server through certificates

• SHA-256: A hashing algorithm; it does not encrypt data for transmission.
• SSL 3.0: Obsolete and insecure. It should not be used.
• AES-256: A strong encryption algorithm, but by itself it does not provide the complete secure communication protocol needed for data in transit.

• VM CPU, memory, disk, and network usage
• Storage transactions and latency
• App Service response time
• Database DTU or CPU utilization

• Azure Traffic Analytics analyzes network traffic flows and security patterns; it is not the general infrastructure metrics tool.
• Azure Activity Log records subscription-level control-plane operations, such as resource creation, deletion, or configuration changes.
• Azure Advisor provides recommendations about cost, security, reliability, performance, and operational excellence, but it is not the primary tool for investigating live metrics.

• Authentication: Verifies a user’s identity, such as username and password.
• Authorization: Determines what the authenticated user is allowed to access.
• Accounting: Records connection and usage details, such as login time or session duration.

• CIA: Confidentiality, integrity, and availability are broad security objectives, not a specific RADIUS function.
• ACL: An access control list contains permit/deny rules on systems or network devices. RADIUS can support access decisions but is not itself an ACL.
• PEM: Privacy-Enhanced Mail is also associated with certificate and key encoding formats; it is unrelated to RADIUS’s primary purpose.

• Default network device credentials: More associated with external attackers or poor device configuration.
• Spear phishing emails: Commonly used to compromise users, but less characteristic of an insider who already has access.
• Typosquatting and impersonation: Primarily social-engineering techniques aimed at deceiving users.
• Unidentified removable devices: Provide a direct way to transfer data outside the organization and may bypass network monitoring.

• C — Some risks cannot be eliminated.

• D — Accepting residual risk does not imply recklessness.

• E — Most companies in this industry will say something similar.

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

• Training or coaching
• Mentoring
• Additional support or resources
• Targeted performance improvement plans

• A: Recognition may be appropriate, but awards do not address identified gaps.
• C: Rotating schedules does not necessarily improve the specific competencies that are missing.
• D: Assessment results should be handled sensitively, but keeping them entirely private prevents useful feedback and development discussions.

• A: Describes a broad purpose and direction, but is not the specific CIMA definition.
• C: “Scoping out” activities is too vague and incomplete.
• D: Combines long-term goals, strategies and policies, but describes a wider strategic-planning statement rather than the definition of strategy itself.

sql 
SELECT COUNT(*) FROM table;

• A: It does not normally need to scan all data files for this operation.
• B: Results are not simply reused from a query cache every time. Caching is separate from Delta’s metadata optimization.
• D: The relevant metadata is maintained through the Delta transaction log, not directly treated as a Parquet-file metadata operation in this context.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• You can configure different pre-shared keys for different device groups.
• All cameras could use one key.
• All scanners could use another key.
• Each key can be associated with an appropriate role or access policy.

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• Leaf switches provide access ports for servers, users, and other devices.
• Spine switches provide the backbone between leaf switches.
• Every leaf switch connects to every spine switch, creating a predictable, full-mesh fabric between the two layers.
• Leaf switches do not connect directly to other leaf switches, and spine switches do not connect directly to other spine switches.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: It focuses on uplink speed, not the scalable topology.
• D: A single spine connection creates a bottleneck and a single point of failure.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

json 
"Resource": "arn:aws:s3:::bucket-name/*"

• A: Revoking or changing an instance profile does not reliably invalidate temporary credentials that have already been issued and may still be valid.
• B: Changing the EC2 security group does not necessarily stop the attacker from using the stolen credentials from elsewhere.
• C: Amazon Macie helps discover sensitive data; Object Lock prevents modification/deletion, not reads or downloads.

• Secret scope: A named container that groups related secrets and defines access permissions. Example: finance-prod.
• Secret key: The name of an individual secret stored inside that scope. Example: db-password.

text 
Scope: finance-prod 
  Key: db-username 
  Key: db-password

python 
dbutils.secrets.get( 
    scope="finance-prod", 
    key="db-password" 
)

• Prevent connections to malware command-and-control servers
• Identify infected systems making those DNS requests
• Collect information for incident response

• A: Attackers do not normally use sinkholes to map a company’s domain structure.
• B: Redirecting employees from legitimate sites to attacker-owned sites describes malicious DNS manipulation, not a defensive sinkhole.
• D: Attracting attackers away from real resources is more closely associated with a honeypot or deception system.

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• Code suggestions: Inline completions as you write code, such as lines, functions, or blocks.
• Chat: An interactive interface for asking questions, explaining code, generating code, and helping with debugging.

• Knowledge Base: Not listed as a standard Copilot Individual IDE feature in this context.
• Pull Request Diff Analysis: More closely associated with GitHub-based code review or pull-request features, not the core Individual IDE extension capabilities.

• C — Custom buttons display at the top and bottom of a page: Correct. In Salesforce Classic, buttons can appear in the page’s button areas, including the top and bottom of record pages.
• D — Custom buttons are available for Person Accounts: Correct. Person Accounts use the Account object, so Account custom buttons can be available on Person Account layouts.
• E — Custom buttons can reference an external app: Correct. A URL custom button can launch or navigate to an external application or website.

• A: JavaScript custom buttons are a Salesforce Classic feature and are not supported in Lightning Experience. They do not enhance Lightning Experience.
• B: The User object does not generally support custom buttons in the same way standard business objects do.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio management
• Data governance
• Risk management
• Compliance

• 10 TB with maximum I/O performance: Use EC2 instance store. It provides very high-throughput, low-latency local storage suitable for temporary video-processing data. The application must tolerate data loss because instance store is ephemeral.
• 300 TB of highly durable media: Use Amazon S3, which is designed for highly durable object storage and can scale to this size.
• 900 TB of inactive archival media: Use S3 Glacier, which provides lower-cost storage for data that is rarely accessed.

• A: Amazon EBS offers high performance but is not the best fit for the question’s “maximum possible I/O” requirement compared with local instance store.
• B: Amazon EFS is durable and shared, but is generally more expensive and less suitable for very large archival storage.
• C: Uses EC2 instance store for performance, but incorrectly uses EFS for the 300-TB durable tier and S3 rather than Glacier for archival data.

• AWS AppSync is designed for serverless applications that need to retrieve and combine data from multiple sources.
• A pipeline resolver can invoke multiple functions or data-source resolvers, including resolvers connected to different DynamoDB tables.
• The application can receive the combined result through one GraphQL request, without requiring custom aggregation logic in the application.
• This is operationally efficient because AppSync manages the API layer and resolver execution.

• Athena Federated Query is intended primarily for analytics and ad hoc querying, not low-latency application data retrieval.
• Querying DynamoDB through Athena can consume DynamoDB read capacity and may affect table performance.
• It also introduces analytical-query overhead and is not the normal choice for a microservice web application.

• Snapshot: Captures a point-in-time state for rollback. It is not an independent running VM and does not protect against failure of the underlying host or storage.
• Convert to dynamic disks: Changes disk allocation behavior; it does not provide redundancy or high availability.
• P2V: Converts a physical machine into a virtual machine. That is a migration process, not an availability solution.

• Online payment fraud
• Account takeover
• Fake account creation
• Suspicious transactions

• ADF: Automatic Document Feeder; a printer/scanner hardware component.
• USB: A short-range wired connection, not a protocol for accessing a remote shared folder.
• PCL: Printer Control Language; it describes how print jobs are formatted, not how files or printers are shared over a network.

1. Product + ProductSubCategory: Inner join

1. Result + ProductCategory: Left outer join

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• If the hashes match, the software has likely not changed.
• If they differ, the software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily verify that software was unchanged.
• Baselines: Establish expected configurations or states, but hashing is the specific method for checking file integrity.
• Tokenization: Replaces sensitive data with non-sensitive tokens and is unrelated to software integrity.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• s3:GetObject for the relevant objects
• s3:ListBucket if listing is required
• Appropriate bucket and object resource permissions

• B: Making the bucket public is insecure and unnecessary.
• C: Prompt engineering cannot override AWS IAM or encryption permissions.
• D: Data sensitivity does not determine whether the role can access it.