EMC DES-6332 Exam Prep
Specialist - Systems Administrator, VxRail Appliance Exam (Page 8 )

• A. Continue using the current system: It will eventually fail and offers no recovery strategy.
• B. Virtualize the entire system: Correct. A VM can preserve the old OS, application, settings, and dependencies while running on newer physical hardware.
• C. Containerize the application: Containers generally share the host OS kernel and are not suitable for preserving an entire incompatible legacy OS.
• D. Clone the disks to USB: A disk clone may provide backup or temporary recovery, but it does not solve hardware compatibility or provide a reliable long-term platform.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

1. It examines the source MAC address and learns it on the incoming port.
2. It examines the destination MAC address.
3. If the destination MAC is already in the MAC/CAM table, it forwards the frame only through the associated port.
4. If the destination MAC is unknown, it performs unknown-unicast flooding:

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

• LastName: Required.
• FirstName: Optional.
• AccountId: Optional; a Contact may be associated with an Account later or remain private, depending on organization settings.
• Name: A compound display field made from first and last name; it isn’t entered as a separate field.

• Partners first log in to the corporate portal, which uses the shared SAML Identity Provider.
• When they select a Salesforce link, the IdP can send a SAML assertion directly to Salesforce.
• Salesforce validates the assertion and grants access to the Partner Community without requiring another login. This is IdP-initiated SSO because authentication begins outside Salesforce.

• SP-initiated SSO starts when Salesforce sends an authentication request to the IdP. That would be appropriate if users began by visiting Salesforce.
• The Web Server and User Agent OAuth flows are for OAuth authorization, not browser-based SAML federation between an IdP and Salesforce.

• Warehouse size: Larger warehouses use more credits per unit of time than smaller ones.
• Number of clusters: A multi-cluster warehouse can run multiple clusters, and each active cluster consumes credits. Therefore, increasing the maximum or active cluster count can increase consumption.

• Number of users: More users may cause more workload, but users themselves do not consume credits.
• Amount of data processed: Snowflake warehouses are not charged directly by the amount of data scanned. However, processing more data may cause the warehouse to run longer, indirectly increasing credits.

• The JSON files contain one billion items, so this is a big-data workload.
• PySpark uses Apache Spark’s distributed, parallel processing, allowing the data to be processed across multiple compute nodes.
• It can read and transform data directly from OneLake, helping minimize unnecessary data movement or duplication.
• A Fabric notebook can also support exploration and visualization, as well as Spark-based analytics and anomaly-detection workflows.

• Pandas is primarily in-memory and generally suited to smaller datasets. One billion records would be impractical on a typical single machine.
• A Power BI report with core visuals is appropriate for visualization and sharing, but it is not the best tool for large-scale transformation, parallel processing, or anomaly detection. It would normally consume prepared data rather than perform the entire workload.

bash 
OTEL_SERVICE_NAME=foundry-agent

bash 
OTEL_SERVICE_NAME=langchain-service

python 
import os 


os.environ["OTEL_SERVICE_NAME"] = "langchain-service" 


from azure.ai.openai... # import your tracing components 
from azure.monitor.opentelemetry import configure_azure_monitor 


configure_azure_monitor( 
    connection_string=os.environ["APPLICATIONINSIGHTS_CONNECTION_STRING"] 
)

• Agent application: OTEL_SERVICE_NAME=foundry-agent
• LangChain application: OTEL_SERVICE_NAME=langchain-service

• B — AWS DataSync: Transfers data between storage systems. It is not a marketplace or integration service for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit stores source code, not third-party analytical datasets. Kinesis is for streaming data, not retrieving datasets from repositories.
• D — Kinesis Data Streams and ECR: Amazon ECR stores container images, not third-party datasets.

• A — Capacity: The system must handle all current records and anticipated future records. A system that cannot cope with volume will quickly become ineffective.
• C — Accuracy: Academic records are critical, so the new system must be at least as accurate as the existing system and comparable systems. Poor accuracy could cause serious administrative and reputational problems.
• D — Integration: Linking with the university’s financial systems supports consistency and avoids duplicate data entry, especially for registration, deregistration and fee-related transactions.

• B — Parallel running: This is a useful implementation and risk-control technique, but it is not an essential feature of the system itself. It may also be expensive and time-consuming.
• E — Internet access for all information: This creates significant confidentiality and security risks. External access might be needed for selected services, but unrestricted access to all information is not essential and would be inappropriate for student records.

• Highly polished, organization-wide presentations
• Advanced dashboard design and customization
• Broader business-user distribution and interaction
• Specialized BI governance and modeling features

• Firewall
• Intrusion prevention and detection
• Antivirus or antimalware
• Web and email filtering
• Virtual private networking (VPN)
• Sometimes content filtering and centralized reporting

• The message came from the claimed sender (authentication)
• The message was not altered (integrity)
• The sender cannot easily deny sending it (non-repudiation)

• Attackers can send unsigned phishing emails.
• Attackers may compromise a legitimate account and send signed malicious emails.
• Users may still be tricked by a validly signed message.

• Verifies the sender’s identity using their private key.
• Confirms the transaction was not altered after signing.
• Provides evidence that the signer approved or originated the transaction.

• Digital certificates: Bind an identity to a public key, but do not themselves prove that a specific transaction was signed.
• Encrypted passwords: Protect confidentiality or authentication, but generally do not provide transaction-level nonrepudiation.
• One-time passwords: Authenticate a user for a session or transaction, but usually do not provide durable proof of who authorized the electronic record.

• Portfolio definition cycle — establishes and maintains the portfolio strategy, objectives, and management framework.
• Portfolio delivery cycle — coordinates and monitors the delivery of change initiatives, ensuring the portfolio remains aligned with strategic objectives and delivers value.

• Practice — a structured area of portfolio management activity, such as risk management or resource management.
• Technique — a method used to perform an activity; it is not the term for portfolio delivery itself.
• Principle — a guiding rule for effective portfolio management.

• CSIRT: A Computer Security Incident Response Team that handles and coordinates incident response.
• CVSS: A scoring system used to rate the severity of vulnerabilities.
• SOAR: Security Orchestration, Automation, and Response technology used to automate security workflows.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Group1 — security-enabled: Eligible.
• Group2 — mail-enabled and security-enabled: Eligible because it is still a security group.
• Group3 — Microsoft 365 group: Not eligible for group-based licensing.
• Group4 — Microsoft 365 group, not security-enabled: Not eligible.

• Physical: Protects facilities or equipment, such as locks and security cameras.
• Technical: Uses technology, such as firewalls, encryption, or access controls.
• Operational: Covers day-to-day actions and processes, such as training, backups, or incident response.
• Managerial: Includes policies, standards, risk assessments, and procedures.

• A. IDS attack signatures: An IDS mainly detects suspicious network traffic. It is not the best control for scanning uploaded documents.
• C. Load balancer: Distributes traffic among servers and can improve availability, but does not specifically detect malware.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection. It may inspect web requests, but malware scanning of PDF files is not its primary function.

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• Disable high concurrency: This changes session-sharing behavior but does not provide dedicated compute or true workload separation.
• Modify the number of executors: Adjusts resources within a Spark job; it does not isolate bronze and silver processes.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

• FTP — Transfers files using a client/server model and supports authentication. It uses separate control and data connections.
• TFTP — A very simple file-transfer protocol with no authentication and minimal features. Commonly used to transfer router or switch configuration files and IOS images.
• SCP — Securely copies files over SSH. It provides encryption and authentication.
• SFTP — Also transfers files securely through SSH, but provides more file-management capabilities than traditional SCP.
• HTTP/HTTPS — Primarily web protocols, but can also download files; HTTPS encrypts the session.

• TFTP = simple, unauthenticated file transfer
• FTP = file transfer with authentication, but not inherently encrypted
• SCP/SFTP = secure file transfer using SSH

• JobTitle: User1 and User3 only
• UsageLocation: User1, User2, and User3

• For a user whose source of authority is Windows Server Active Directory, attributes such as JobTitle are synchronized to Microsoft Entra ID. You must change them in on-premises AD; editing them in Entra ID is not allowed or will be overwritten.
• UsageLocation is a cloud-managed attribute used mainly for licensing and service availability. It can be set or changed in Microsoft Entra ID, including for synchronized users.

• Penetration test: Tests for exploitable vulnerabilities; it does not provide a broad opinion on whether security controls operate effectively.
• Annual self-assessment: Not independent, so it provides less assurance.
• Allow each client the right to audit: Inefficient because every customer may conduct a separate audit, creating duplicated effort and disruption.

• Installing software
• Applying configuration changes
• Calling PowerShell scripts
• Running setup or customization commands

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

• GPO logon script: Runs only when a user logs on and depends on domain/GPO processing.
• GPO startup script: Runs during startup, but requires the VM to be domain joined and receives the applicable GPO.
• Place scripts in a VHD: Merely makes the scripts available; it does not automatically execute them.

• Deficiency found before patient use: usually does not require an adverse-event report because no patient exposure occurred.
• Event caused solely by the patient’s condition: may not be reportable if the device did not contribute.
• Malfunction protection operated correctly: generally exempt when the device’s safety mechanism worked as intended and prevented harm.

• Architects design overall Splunk infrastructure and data strategy.
• Administrators manage configuration, access, and system operations.
• Knowledge Managers create and maintain knowledge objects such as data models, field extractions, and event types. They may support pivots, but they are not the primary users of them.

• Amazon S3 as the origin for static content
• Application Load Balancer (ALB) as the origin for dynamic content
• Amazon Route 53 configured to point the company’s domain name to CloudFront

• /static/* ? S3 origin; cache content at edge locations
• Dynamic paths such as /api/* ? ALB origin; forward requests to the EC2 application

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.

1. The specific table — for example, incident
2. The parent table — for example, task
3. The wildcard table — *, which applies broadly

• Document feeder: A scratch, dirt, or debris on the feeder glass or rollers can create a line on every scanned image.
• Pickup rollers: Move paper through the printer; they would not normally create a scanner-only line.
• Corona wire: Affects toner charging and would cause defects on printed output.
• Drum assembly: Also affects printed pages, so faxes and computer print jobs would show the line too.

• A — Increased call deflection: o KCS disponibiliza conhecimento reutilizável para clientes e agentes, ajudando a resolver dúvidas sem abrir ou continuar chamadas.
• C — Reduced issue resolution time: os representantes reutilizam artigos e soluções já documentadas, acelerando o atendimento.
• E — Optimized use of resources: o conhecimento compartilhado reduz retrabalho e melhora o uso dos recursos da equipe.

• A hypervisor allows multiple virtual machines to run on one physical server.
• Each VM can have its own operating system, so the customer can consolidate Windows, Linux, and Unix servers.
• A Type 2 hypervisor runs on a host operating system and can be deployed on local hardware, helping address data privacy and avoiding ongoing public-cloud charges.

• Containers share the host operating system’s kernel.
• They are well suited to consolidating applications, but they generally cannot independently run a mix of unrelated kernels such as Windows, Linux, and Unix on one host.

• A. PsFile — Correct: Displays files opened remotely on a system. This reveals shared resources and user activity.
• B. UserInfo — Correct: Gathers information about user accounts, supporting account and privilege enumeration.
• C. PsPasswd — Answer key lists it: This is questionable. PsPasswd is primarily used to change passwords remotely, not enumerate information. The key may classify it broadly as a Windows account-management tool, but it is not a strong enumeration example.
• D. WinSSLMiM — Incorrect: Used for SSL man-in-the-middle activity, not enumeration.

• Amazon SageMaker — charges apply for compute, storage, and other resources used.
• AWS Config — generally charges for configuration recording and rule evaluations.
• Amazon CloudWatch — has a limited free tier, but many metrics, logs, alarms, and API usage can incur charges.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Who owns security risks and decisions
• Who is responsible for implementing controls
• Who reports security performance to management
• How security responsibilities align with business objectives

• B — Compliance with audit requirements: Governance may support compliance, but audit compliance is not its main objective.
• C — Monitoring security incidents: This is an operational security activity, not the central purpose of governance.
• D — Creation of tactical solutions: Governance establishes direction and oversight; tactical solutions belong to management and operational teams.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• Operating profit is affected because transfer price determines internal sales revenue.
• Return on investment (ROI) is affected because ROI depends partly on operating profit.
• Sales revenue is affected because the division records revenue from transferring its output.
• Cost of components purchased is not affected by the transfer price. These are input costs paid to external suppliers and are based on the supplier’s price.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

1. x = -100
2. -100 < x < 100
3. 100 = x < 1000
4. x = 1000

• -500 ? class 1
• 0 ? class 2
• 100 ? class 3
• 1000 ? class 4