Free E20-393 Exam Braindumps
Unity Solutions Specialist Exam for Implementation Engineers Questions 66–70 (page: 15)

Updated On: 9-Feb-2026

In order to replace a faulty component, a service provider has placed one of the Unity Storage Processors into Service mode. Once the component is replaced, how is the Storage Processor brought back into Normal mode?

  1. Exit the Service Mode task
  2. Reboot the Storage Processor
  3. Reboot the storage system
  4. Restart the Management software

Answer(s): B

Explanation:

If a single Storage Processor (SP) comes up in Service Mode, in Unisphere, you need to reboot the SP to return it to Normal Mode.


Reference:

https://www.emc.com/collateral/TechnicalDocument/docu69355.pdf (page 4)



A user is having difficulty troubleshooting a Unity storage system and the service provider has been contacted for assistance. The service provider needs to run some service commands on the Storage Processors to troubleshoot the issue further.

Which step must be taken to allow the service provider remote access to the storage system?

  1. Enable SSH on the storage system
  2. Set the Unisphere preferences to “Optimize” for remote access
  3. Specify the SMTP configuration
  4. Specify the Remote Logging configuration

Answer(s): A



How long will a Copy Back operation take when a hot spare is invoked?

  1. Pro-Active hot spare does not use a Copy Back operation
  2. Copy Back time depends on the RAID type
  3. Copy Back time depends on the disk capacity
  4. Copy Back time depends on the disk type

Answer(s): B

Explanation:

Note: Starting with Release 24, you can now use a proactive hot spare for proactive disk replacement. Before Release 24 you had to remove the physical disk to replace in order to force a rebuild. During the rebuild phase, the RAID group was "degraded" and at risk.

Resolution:
Three main benefits of using a proactive hot spare:
-Avoiding "uncorrectable errors" due to media problems during the rebuild process.
-Greatly reduce the risk of having a degraded RAID group, and the risk of having a double-faulted RAID group.
-Performance - a copy to hot spare is faster than a normal rebuild.


Reference:

https://community.emc.com/docs/DOC-9419



A storage administrator wants to configure a Unity system to join the list of arrays remotely monitored for activity and system status using Unisphere Central. The security policy on the Unisphere server was set to “automatic”.

What additional security information must be specified in the Unisphere Settings window to enable communication with Unisphere Central?

  1. Unisphere Central IP address and login credentials
  2. Unisphere Central IP address and Central Hash
  3. Unisphere Central Hash and login credentials
  4. Unisphere Central Hash and challenge phrase

Answer(s): D

Explanation:

Configure the security policy to specify how storage systems are verified when connecting to Unisphere Central. Automatic verification automatically verifies storage systems when they connect to Unisphere Central using a preconfigured security certificate hash and passphrase.


Reference:

http://www.emc.com/collateral/white-papers/h13827-unisphere-central-v4-wp.pdf (page 21)



A storage administrator has purchased a UnityVSA and asks your recommendation on how to provision the storage to their ESXi host. Based on Dell EMC best practices, what should you recommend?

  1. Thick Provisioned
  2. Thick Provision Eager Zeroed
  3. Thin Provisioned
  4. Thin Provisioned Eager Zeroed

Answer(s): B


Reference:

https://www.emc.com/collateral/white-papers/h15093-dell-emc-unity-best-practices-guide.pdf (p.11)



Viewing page 15 of 61
Viewing questions 71 - 75 out of 297 questions


Post your Comments and Discuss EMC E20-393 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!