F5 301a Exam Questions
BIG-IP LTM Specialist: Architect, Set up, Deploy (Page 3 )

Updated On: 28-Apr-2026

Remote users who access the LTM device are authenticated via Radius. The default remote user role is Guest Some users need LTM device with the Administrator role. The F5 Radius attributes are configure on the Radius server.
Which configuration item needs to be created?

  1. Remote User role
  2. Admin account
  3. User role
  4. User account

Answer(s): A



An HTTP monitor is created and assigned to a pool with the following non-default configuration:
Interval: 7 seconds
Timeout: 22 seconds
Reverse: Yes
Send String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close Receive String: Up
The HTTP server sends the following response:



What is the resulting pool status?

  1. Unavailable (Enabled)
    Available (Enabled)
  2. Offline (Enabled)
  3. Unknown (Disabled)

Answer(s): A



An ITM Specialist has the configuration shown:



The LTM Specialist needs to create a new virtual server in part B. Which virtual address(es) should be used for the new virtual server?

  1. 10.100.0.1 and.10.120.0.1
  2. 10.90.0.1 and 10.12.0.1
  3. 10.120.0.1 only
  4. 10.90.0.1 and 10.100.0.1

Answer(s): A



A pool with a default connection limit is configured to use Round Robin as the load balancing method. An LTM Specialist needs to ensure that the LTM device selects a server with the fewest number of connections when new clients connect. Another pool is using the same set of backend servers.
Which load balancing-method should the pool be changed to?

  1. Weighted Least Connections (node]
  2. Weighted Least Connections (member)
  3. Least Connections
  4. Least Connections

Answer(s): C



An LTM device needs an additional traffic group.
Which configuration item is required?

  1. Default device
  2. Group name
  3. MAC Masquerade Address
  4. Auto Fallback Timeout

Answer(s): B



A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections. Which configuration change should be made to meet these requirements?

  1. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
  2. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
  3. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.
  4. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.

Answer(s): D



set payload {CACHE :: payload}
}
Which two profiles should be used on the virtual server? (Choose two.)

  1. http-transparent
  2. http compression
  3. http
  4. webacceleration
  5. stream

Answer(s): C,D



A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?

  1. tmsh modify net van External failsafe enabled
  2. tmsh create sys ha-group External trunks add Externally
  3. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
  4. tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))

Answer(s): C



Viewing page 3 of 20
Viewing questions 17 - 24 out of 147 questions


301a Exam Discussions & Posts

AI Tutor AI Tutor 👋 I’m here to help!