A Discrete manufacturing company produces speakers. The high-end speaker model uses protective rubber strips on the edges.Approximately five inches of rubber is consistently scrapped in the production process, regardless of production quantity. Workers manually consume the extra material on the picking list or scrap it in an inventory journal.You need configure the system to automatically account for this scrap on the Bill of materials (BOM).What should you do?
Answer(s): A
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-information-used-in-bom-calculations- with-standard-costs
DRAG DROPA customer is implementing Dynamics 365 Supply Chain Management within a single legal entity. The company has five warehouses in Mexico.The company must configure a new item as not sellable when it enters a new warehouse. The configuration must be set up once and then applied to all five warehouses.The system configuration for all five locations currently has only a single status where the item is sellable in all locations at all times.You need to configure the system to meet the requirement.Which pages should you use? To answer, move the appropriate pages to the correct configurations. You may use each page once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.Note: Each correct selection is worth one point.Select and Place:
Box 1: Storage dimension groupsDesignate the item as being sellable when it enters the warehouse.* Storage dimension groupsTo plan coverage for items that have an available inventory status, select the Coverage plan by dimension option for a storage dimension on the Storage dimension groups page.Box 2: Inventory statusesMark the item as blocked for sales when it enters the warehouse.* Inventory statusesAn inventory status is one of the dimensions in the storage dimension group. Inventory statuses can be categorized as available or unavailable, and you can use the Inventory blocking parameter to block items that have an unavailable inventory status. Items that have a blocked status are considered physical inventory, and they can't be used on a production order, sales order, transfer order, or outbound transaction.Box 3: Warehouse management parametersSet the default order status for all warehouses.To start working with Warehouse management, you need to complete the setup of the general warehouse parameters to support the business processes of your company.
https://learn.microsoft.com/en-us/dynamics365/supply-chain/inventory/inventory-statuses https://learn.microsoft.com/en-us/dynamics365/supply-chain/warehousing/warehouse-management-overview
A manufacturing company is implementing Dynamics 365 Supply Chain Management.The company requires accurate tracking and analysis of both direct and indirect costs for production orders.The costing sheet must include multiple cost groups for comprehensive cost analysis. All indirect costs must be accounted for in a standardized manner across different sites.You need to define the structure of the costing sheet and the basis for calculating indirect costs.What should you do?
Can I have different costing sheets for each site?No, you can't have a different costing sheet for each site. You can create only one costing sheet for each legal entity. However, you can configure total nodes, cost groups, or indirect cost nodes per site. This configuration is a manual process, and you must maintain the hierarchy and item assignments on the costing sheet when organizational or operational changes occur. If a single item is produced or purchased in more than one site, there's no mechanism that lets you treat the item differently on the costing sheet for each site. All indirect cost codes have a rate or surcharge that is defined in your costing version. The costs that you define are always site specific.
https://learn.microsoft.com/en-us/dynamics365/supply-chain/cost-management/inventory-costing-faq
DRAG DROPA furniture production company is implementing Dynamics 365 Supply Chain Management. The furniture goes through multiple stages of production with cutting wood, assembling the furniture, and then applying paint.The production manager wants to ensure that the screws used for the assembly of the furniture are not itemized in inventory. Instead, they must be used as needed by the production team. This could change in the future and must have a flexible approach to configuration.You need to set up the production requirements for the screws.How should you configure the screw requirements? To answer, move the appropriate configurations to the correct requirements. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.Note: Each correct selection is worth one point.Select and Place:
Box 1: ProductionSet production typeIn Microsoft Dynamics 365 Supply Chain Management, a product's type can be set to indicate it is a manufactured item to support production orders, bills of materials (BOMs), and route information. When configuring a product, the "Manufacturing" setting for the product type designates it as a manufactured item, enabling you to define its BOM and route for use in production processes.Incorrect:* Co-productIn Dynamics 365 Supply Chain Management, a co-product is a valuable product that is intentionally produced alongside a primary product from the same manufacturing process. Unlike by-products, co-products have inherent value, are often sold for profit, and share the production costs of the main item, with their costs being allocated proportionally. For example, when manufacturing a liquid detergent, the base for a handwash could be considered a co-product.Box 2: BOMDefault order settingTo manage non-inventoried items that are used as needed in a production process in Dynamics 365 Supply Chain Management, you should configure these items as variable items or consumption-based items within the Bill of Materials (BOM) or production route, rather than setting them as a specific production type for the item itself. These items will be picked or consumed on demand from the production floor without being pre-defined in inventory, with options to allow over-dispensing if necessary.
https://learn.microsoft.com/en-us/dynamics365/supply-chain/production-control/production-process-overview https://learn.microsoft.com/en-us/dynamics365/supply-chain/cost-management/manufactured-items-treated- as-purchased-items
HOTSPOTA company is implementing Dynamics 365 Supply Chain Management. Items are grouped into finished goods, service, raw-metal, and raw-other.The production manager reports an issue with steel shortages stopping production and must ensure all steel is reserved against production orders when they are scheduled. All other items are reserved when production orders are started.You need to configure the reservations for production orders.What should you configure? To answer, select the appropriate options in the answer area.Note: Each correct selection is worth one point.Hot Area:
Box 1: Override the default reservationReserve items when production orders are started.Override the default reservation principle for materials in production The Override default production reservation feature lets you set a default reservation principle for each item model group. Therefore, different reservation principles can automatically be applied for each item that is part of a production bill of materials (BOM) or batch order formula. You can select whether each item model group should override the default reservation principle that is set for an order, and what reservation principle should be used instead (manual, estimation, scheduling, release, or start).Box 2: Reservation hierarchySet raw-metal reservations.The Reservation hierarchy feature in Dynamics 365 Supply Chain Management can be used to manage items that tend to run out by providing control over which inventory dimensions are reserved, such as a "Batch-above [location]" hierarchy. By placing dimensions like batch or serial numbers above the location level, you can reserve specific batches or items before they are physically picked, ensuring that these high-demand items are allocated to orders in advance and preventing shortages from appearing at the customer order line.
https://learn.microsoft.com/en-us/dynamics365/supply-chain/production-control/override-default-reservation- principle https://learn.microsoft.com/en-us/dynamics365/supply-chain/warehousing/reservations-in-warehouse- management
Post your Comments and Discuss Microsoft MB-335 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the MB-335 content, but please register or login to continue.