Nokia 4A0-103 Exam Prep
Nokia Multiprotocol Label Switching (Page 3 )

• A. It is unidirectional. An LSP is a unidirectional tunnel from a head-end to a tail-end. If you need bidirectional traffic, you typically have a separate LSP in the reverse direction (or a true bidirectional LSP in some implementations).

• D. It provides a specific tunnel for a FEC through the network. An LSP carries a Forwarding Equivalence Class (FEC) along a defined path, i.e., a dedicated tunnel.

• B. It is bidirectional. Not inherently true; LSPs are defined per direction (a reverse path would be a separate LSP unless a bidirectional LSP is explicitly configured).
• C. It must always have a secondary path. A secondary (protect) path is optional; LSPs can exist without protection.
• E. It always follows the IGP best path. Path selection can be influenced by explicit routing constraints or RSVP/TE settings; it isn’t guaranteed to always follow the “best” IGP path.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• Identity provider (IdP): Authenticates users and asserts their identity.
• Service provider (SP): The application being accessed—in this case, Salesforce/the employee portal.
• Identity store: A directory that stores user identities, such as Active Directory.
• Authentication store: A system used to validate credentials.

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• A — Capacity: The system must handle all current records and anticipated future records. A system that cannot cope with volume will quickly become ineffective.
• C — Accuracy: Academic records are critical, so the new system must be at least as accurate as the existing system and comparable systems. Poor accuracy could cause serious administrative and reputational problems.
• D — Integration: Linking with the university’s financial systems supports consistency and avoids duplicate data entry, especially for registration, deregistration and fee-related transactions.

• B — Parallel running: This is a useful implementation and risk-control technique, but it is not an essential feature of the system itself. It may also be expensive and time-consuming.
• E — Internet access for all information: This creates significant confidentiality and security risks. External access might be needed for selected services, but unrestricted access to all information is not essential and would be inappropriate for student records.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• Configure row-level security (RLS) using the sales region and the HR manager’s identity.
• Publish the reports and datasets through a Power BI app.
• Grant the HR managers permission to use the app, but do not add them as workspace members.
• App users can view and interact with reports while RLS limits them to their region.
• They cannot modify the report layout because they do not have workspace editing permissions.

• Adding them to the workspace gives them workspace permissions that may allow report or dataset changes, depending on the assigned role.
• Creating copies is unnecessary and creates maintenance and security problems.
• Hosting datasets and reports in different workspaces does not, by itself, provide the required controlled access.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• Monitoring: Detects activity but does not remove the underlying risk.
• Patching: Useful for systems that must remain operational, but these desktops are unused.
• Isolating: Can be a temporary containment measure, but permanently removing unnecessary systems is more appropriate.

spl 
error AND host=WWW3 
status=404 OR status=500 
NOT source=access.log

• Quotation marks are used for exact phrases or values containing spaces.
• Parentheses group parts of a Boolean expression, but they are not required for every Boolean search.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• BCP (Business Continuity Plan): Ensures the organization can continue its broader business operations during and after a disruption. It is broader than the IT-focused recovery required here.
• Communication plan: Defines how information is shared with employees, the public, and other stakeholders; it does not restore systems.
• IRP (Incident Response Plan): Handles and contains security incidents, such as malware or unauthorized access. A tornado is a disaster, not primarily a cybersecurity incident.

• Cloud architecture
• Data architecture
• Platform engineering
• Data engineering
• Provisioning and modernization

• Data protection is associated mainly with security and risk management.
• Data governance belongs to the governance perspective.
• Data science is not an AWS CAF capability.

• Physical: Protects facilities or equipment, such as locks and security cameras.
• Technical: Uses technology, such as firewalls, encryption, or access controls.
• Operational: Covers day-to-day actions and processes, such as training, backups, or incident response.
• Managerial: Includes policies, standards, risk assessments, and procedures.

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• Virus signatures: Primarily associated with antivirus or antimalware tools.
• Security agent deployment: Usually handled by endpoint-management or endpoint-security platforms.
• Vulnerability scanning: Performed by vulnerability-assessment tools, although a SIEM may ingest their results.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• Vulnerability scanner: Identifies technical weaknesses in systems, applications, or devices.
• Penetration test: Simulates attacks to determine whether vulnerabilities can be exploited.
• SCAP (Security Content Automation Protocol): Uses standardized formats and protocols for automated vulnerability, configuration, and compliance checks.
• Illumination tool: Maps and analyzes broader supply-chain exposure and third-party risk.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

• Required response and resolution times
• Availability or uptime targets
• Performance standards
• Support obligations
• Remedies or penalties for failing to meet the terms

• SOW (Statement of Work): Defines the project’s scope, tasks, deliverables, and schedule.
• MOA (Memorandum of Agreement): Describes agreed responsibilities between parties, often for a specific activity.
• MOU (Memorandum of Understanding): Records a mutual understanding or intention, usually less formal than a contract.

• Suporta domínios personalizados.
• Oferece 50 GB de armazenamento — suficiente para os 10 GB de cada aplicação.
• Usa instâncias de computação dedicadas.
• Inclui balanceamento de carga entre instâncias.
• É o plano mais econômico entre as opções que atendem a todos esses requisitos.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

• Identified risks
• Risk owners or responsible parties
• Likelihood and impact
• Risk response plans
• Current status
• Risk thresholds or trigger conditions

• Risk tolerance: The amount and type of risk an organization is willing to accept; it is not primarily a tracking document.
• Risk transfer: Moving the financial or operational impact of a risk to another party, such as through insurance or outsourcing.
• Risk analysis: The process of evaluating a risk’s likelihood and impact.

• Remote and global work: Access is based on the approved device, not a specific office or geographic location.
• Seamless login: Users may not need to repeatedly enter credentials on a recognized device.
• Limited equipment: It uses devices employees already have rather than requiring separate hardware.

• Geotagging: Restricts access based on location and may prevent legitimate remote work.
• Smart cards: Require issuing and managing additional physical equipment.
• Time-based logins: Limit access by time and do not provide a seamless authentication experience.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• Response and resolution time frames
• Availability or uptime requirements
• Performance targets
• Support obligations
• Penalties for failing to meet requirements

• SOW (Statement of Work): Defines the project’s scope, tasks, and deliverables.
• MOA (Memorandum of Agreement): Describes cooperation and responsibilities between parties.
• MOU (Memorandum of Understanding): Records a general mutual understanding, usually without detailed enforceable service targets.

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

text 
interface GigabitEthernet0/0.10 
 encapsulation dot1Q 3

• .10 is the router’s local subinterface number.
• dot1Q 3 identifies the 802.1Q VLAN tag carried on the trunk.

text 
interface GigabitEthernet0/0.3 
 encapsulation dot1Q 3

text 
interface GigabitEthernet0/0.2 
 encapsulation dot1Q 2

• Microservices: An application-design approach that divides an application into smaller services. It does not inherently reduce the number of operating systems.
• Virtualization: Creates virtual machines, but each VM generally requires its own complete operating system. This improves isolation but does not minimize OS instances as effectively.
• Infrastructure as code: Uses code to automate infrastructure deployment and configuration. It improves consistency but does not determine how many operating systems are used.

• 10 TB with maximum I/O performance: Use EC2 instance store. It provides very high-throughput, low-latency local storage suitable for temporary video-processing data. The application must tolerate data loss because instance store is ephemeral.
• 300 TB of highly durable media: Use Amazon S3, which is designed for highly durable object storage and can scale to this size.
• 900 TB of inactive archival media: Use S3 Glacier, which provides lower-cost storage for data that is rarely accessed.

• A: Amazon EBS offers high performance but is not the best fit for the question’s “maximum possible I/O” requirement compared with local instance store.
• B: Amazon EFS is durable and shared, but is generally more expensive and less suitable for very large archival storage.
• C: Uses EC2 instance store for performance, but incorrectly uses EFS for the 300-TB durable tier and S3 rather than Glacier for archival data.

• Each Case must follow defined support steps.
• Each step must be completed within a specified time limit.

• Case Escalation Rules: Escalate Cases based mainly on age or criteria; they do not model a complete sequence of service steps.
• Process Builder with Scheduled Actions: Can automate time-based actions but is not the standard framework for Case service-level commitments.
• Omni-Channel Routing: Routes work to agents based on capacity and priority; it does not track Case lifecycle deadlines.

• Ease of exploitation
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and names a specific publicly known vulnerability; it does not measure severity.
• OSINT: Refers to intelligence gathered from publicly available sources.
• SOAR: Automates and coordinates security operations, such as alert response and playbooks.