Nokia 4A0-103 Exam Prep
Nokia Multiprotocol Label Switching (Page 4 )

• A. It is unidirectional. An LSP is a unidirectional tunnel from a head-end to a tail-end. If you need bidirectional traffic, you typically have a separate LSP in the reverse direction (or a true bidirectional LSP in some implementations).

• D. It provides a specific tunnel for a FEC through the network. An LSP carries a Forwarding Equivalence Class (FEC) along a defined path, i.e., a dedicated tunnel.

• B. It is bidirectional. Not inherently true; LSPs are defined per direction (a reverse path would be a separate LSP unless a bidirectional LSP is explicitly configured).
• C. It must always have a secondary path. A secondary (protect) path is optional; LSPs can exist without protection.
• E. It always follows the IGP best path. Path selection can be influenced by explicit routing constraints or RSVP/TE settings; it isn’t guaranteed to always follow the “best” IGP path.

• A. Tuning system software: This is a corrective action, not an analysis method. Tuning should be based on measured performance data.
• B. User dissatisfaction reports: Useful as an indicator, but subjective and insufficient for diagnosing the cause.
• D. Off-peak utilization and response time: This may hide problems occurring during peak periods. Performance analysis should cover representative or peak workloads.

• Valor maior: mais aderência às instruções e aos detalhes descritos.
• Valor menor: mais liberdade criativa e resultados potencialmente mais variados.
• Valor excessivamente alto: pode causar artefatos ou imagens menos naturais.

• Aumentar o número de passos de geração: pode melhorar qualidade e refinamento, mas não é o principal controle de especificidade do prompt.
• MASK_IMAGE_BLACK: relaciona-se ao uso de máscara em geração ou edição de imagens, não à especificidade textual.
• Prompt strength: é mais associado à força do prompt em processos como image-to-image; nesta questão, o parâmetro diretamente ligado à aderência textual é o CFG scale.

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• How quickly the vendor must respond to an incident or request
• Target resolution times
• Availability or uptime requirements
• Performance metrics and penalties for not meeting them

• SOW (Statement of Work): Describes the project’s scope, tasks, deliverables, and timeline.
• MOA (Memorandum of Agreement): Documents a formal agreement to cooperate or perform specific activities.
• MOU (Memorandum of Understanding): Records a mutual understanding or intent, often less binding than a contract.

• Inherent risk: Risk that exists before controls are implemented.
• Avoided risk: Risk eliminated by choosing not to perform the risky activity.
• Operational risk: Risk arising from failures in processes, people, systems, or daily operations.

• Failed login attempts
• The account being targeted
• The source user or system
• Time and frequency of attempts

• Two-factor authentication: Helps prevent unauthorized access, but does not primarily detect the employee’s attempts.
• Firewall: Controls network traffic; it generally does not monitor individual login attempts.
• Intrusion prevention system (IPS): Can detect certain network attacks, but this scenario is best addressed through authentication and audit logging.

• SOW
• SLA
• MOA
• MOU

• administrators — Full access to switch configuration and REST API functions; excessive for this requirement.
• sysadmin — Intended for highly privileged system administration, not basic monitoring.
• helpdesk — More limited and focused on troubleshooting/support functions; it does not match the stated default role and level-1 requirement as directly.

• Elicited and documented customer requirements
• Converted them into clear, measurable specifications
• Validated the requirements with the customer
• Used them as the basis for design, quality checks, and acceptance

• A: Requirements should reflect the customer’s needs—not the supplier’s standards.
• B: Iteration review planning does not replace proper requirements collection.
• D: A retrospective occurs after work is completed and is mainly for process improvement, not initial requirements definition.

• Azure Resource Manager (ARM) templates define Azure resources in a declarative JSON file.
• You can deploy the same template repeatedly for each business unit, ensuring that identical resources are created consistently.
• Templates reduce manual administrative effort and support repeatable, automated deployments.
• Parameters can customize values such as names, regions, and sizes while keeping the overall resource configuration the same.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• Basic: No technical or architectural guidance.
• Standard: Technical support, but not the required design-assessment service.
• Professional Direct: Provides advisory and architecture guidance.
• Premier: Provides it too, but is unnecessarily expensive for this requirement.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• A. Extranet
• B. VLAN
• C. Intranet
• D. VPN

• Primary and core nodes: Use On-Demand Instances because the workload is business-critical. These nodes manage the cluster and store/process HDFS data.
• Task nodes: Use Spot Instances in an instance fleet. Task nodes are suitable for interruption because they do not hold essential cluster data and can be replaced or diversified across instance types.
• Terminate the entire cluster after processing: The job runs only about six hours each morning, and EMRFS stores data in Amazon S3. Keeping the cluster running for the rest of the day would waste money.

• A: Using Spot for primary and core nodes risks interruption of the critical cluster.
• C: All On-Demand is reliable but unnecessarily expensive; terminating the cluster helps, but Spot task nodes provide greater savings.
• D: Leaving primary and core nodes running after the task finishes continues to incur costs. Savings Plans also are less appropriate for this intermittent workload.

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• Replace the keyboard: More expensive and unnecessary before simpler causes are ruled out.
• Replace the key switch: Laptop keyboards generally aren’t designed for individual switch replacement.
• Replace the circuit board: Excessive for a single nonworking key and not a cost-effective first step.

• Identity provider (IdP): Authenticates users and asserts their identity.
• Service provider (SP): The application being accessed—in this case, Salesforce/the employee portal.
• Identity store: A directory that stores user identities, such as Active Directory.
• Authentication store: A system used to validate credentials.

• Planning – identifying the need, objectives, scope and resources.
• Analysis – understanding business requirements and current problems.
• Design/development – determining how the system will work.
• Implementation – installing the system and putting it into operation.

python 
import azure.cognitiveservices.speech as speechsdk 


speech_config = speechsdk.SpeechConfig( 
    subscription="YOUR_KEY", 
    region="YOUR_REGION" 
)

Important Azure Speech SDK classes

• SpeechConfig

• AudioConfig

python 
  audio_config = speechsdk.audio.AudioConfig( 
      use_default_microphone=True 
  )

• SpeechRecognizer

python 
  recognizer = speechsdk.SpeechRecognizer( 
      speech_config=speech_config, 
      audio_config=audio_config 
  )

• SpeechSynthesizer

• AudioOutputConfig

 Bogotá, Colombia