Nokia 4A0-103 Exam Actual Questions
Nokia Multiprotocol Label Switching (Page 6 )

• A. It is unidirectional. An LSP is a unidirectional tunnel from a head-end to a tail-end. If you need bidirectional traffic, you typically have a separate LSP in the reverse direction (or a true bidirectional LSP in some implementations).

• D. It provides a specific tunnel for a FEC through the network. An LSP carries a Forwarding Equivalence Class (FEC) along a defined path, i.e., a dedicated tunnel.

• B. It is bidirectional. Not inherently true; LSPs are defined per direction (a reverse path would be a separate LSP unless a bidirectional LSP is explicitly configured).
• C. It must always have a secondary path. A secondary (protect) path is optional; LSPs can exist without protection.
• E. It always follows the IGP best path. Path selection can be influenced by explicit routing constraints or RSVP/TE settings; it isn’t guaranteed to always follow the “best” IGP path.

• What the goal is: You want to add guest (external) users to your Azure AD tenant contoso.com, one entry per external user in a CSV.

• The proposed solution uses New-AzureADUser for each external user. Why this isn’t correct: New-AzureADUser creates a regular (internal) user in your directory. It does not create a guest/B2B user invite. So you’d end up with 500 ordinary accounts, not guest accounts with external access.

• The correct approach: Use New-AzureADMSInvitation for each external user. This invites the external user to your directory and creates a guest user (a B2B collaboration user) in your tenant. The invited user then accepts the invitation and gains access as a guest.

• Azure AD vs directory/tenant: Azure AD is the cloud identity service. A directory (also called a tenant) is your specific instance of that service (contoso.com in your scenario). The terms are often used interchangeably in exams.
• Guest user vs internal user: A guest user is external to your organization; an internal user is created directly in your directory as a normal employee/user account.
• B2B invitation: The process of inviting external users so they can collaborate in your resources; New-AzureADMSInvitation is designed for this.

• Cross-account access is typically implemented with an IAM role. You create a role in the target account (where the resources live) and configure a trust policy that allows principals from the source account to assume that role.
• Users in the source account then assume the role (via Switch Role in the console or STS:AssumeRole) and receive temporary credentials with the role’s permissions to access the resources.

• IAM group: Groups exist inside a single account; they don’t grant cross-account access.
• IAM tag: Tags are metadata and do not grant access.
• IAM Access Analyzer: It analyzes and identifies public or cross-account access but does not grant access itself.

• Security Development Operations (SDO): a security-focused take on DevOps, integrating security into the development pipeline.
• Service Data Object (SDO): a data representation used in some middleware or enterprise apps.
• Software-Defined Overlay (SDO): a networking overlay concept.
• Secure Data Object: a generic data-security term.

• On-Demand: You pay by the hour with no long-term commitment. This is ideal for workloads that are infrequent or have highly variable usage. Since this job runs only 24 hours once per year, you pay only for those 24 hours, with no wasted upfront or long-term payments.
• Reserved Instances: Require a 1- or 3-year commitment and pay for capacity whether you use it or not. For a workload that runs just 24 hours a year, you’d be paying for most of the term unused, making it far less cost-efficient.
• Spot Instances: Can be interrupted whenever AWS needs capacity, which is unacceptable for an uninterruptible workload.
• Dedicated Instances: Generally more expensive and aimed at licensing or compliance requirements; not needed for this use case.

• Correct answer: UBA (A)

• Why: UBA (User Behavior Analytics) analyzes user activity, builds baselines of normal access patterns, and flags deviations (e.g., accessing sensitive projects not related to the user’s role). This insider-threat detection is exactly what the scenario requires.

• Why not the others:

• The correct setting to configure is the Enrollment Status Page (ESP) profile.
• Why: ESP tracks the enrollment progress and logs during Autopilot provisioning. You can enable log collection within the ESP policy so that, if ESP times out, the user can collect and share the logs with support.
• Optional enhancement: In the ESP policy (or the Autopilot diagnostics settings), you can enable:

• Automatic enrollment settings: control how devices auto-enroll, not log collection.
• Windows Autopilot deployment profile: controls deployment steps but not ESP log collection.
• Device configuration profile: applies settings but doesn’t provide ESP log collection mechanics.

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• MFA verifies a user’s identity using additional authentication factors, such as a phone prompt or security token.
• It helps prevent unauthorized access even if a password is compromised.
• It does not provide secure storage or encryption of credentials used during automated deployment.

• Correct answer: A

• Why:

• Takeaway: For data exfiltration detection with ETD, opt for targeted data read audit logs on the designated resources to balance visibility and cost.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity and usually alerts rather than directly scanning and blocking uploaded files.
• C. Load balancer: Distributes traffic among servers but does not inspect files for malware.
• D. WAF: Protects web applications from attacks such as SQL injection, cross-site scripting, and some malicious requests. It is not primarily a PDF-malware scanning solution.

• Enable the owner dimension
• Allocate a standard costing inventory model

• Owner dimension (B): This dimension Lets you track who owns the stock. By enabling the owner dimension, items can be configured as either company owned or consignment (vendor-owned) when you create or edit items. Without enabling this dimension, you can’t designate ownership per item.
• Standard costing inventory model (D): Selecting a costing model determines how item costs are calculated and posted. Standard costing provides a fixed cost per unit, which is commonly used for agreed pricing scenarios like consignment arrangements for easier accounting and valuation. It helps ensure consistent cost treatment across transactions for items that can be owned by the company or on consignment.

• Batch dimension (A): Batch tracking is unrelated to ownership and isn’t required to support company-owned vs. consignment configurations.
• Moving average costing (C): This is an alternative costing method. It’s not required to enable ownership config, and the exam’s expected choice focuses on standard costing for this scenario.

• The correct answer is D: All of the above.

• Snowflake Web Interface (UI): You can create and manage Virtual Warehouses from the UI (resize, suspend/resume settings, etc.).
• SQL commands: You can create and alter warehouses with DDL like CREATE WAREHOUSE and ALTER WAREHOUSE.
• Data integration tools: ETL/ELT tools can create/manage warehouses by connecting to Snowflake and issuing the appropriate commands or using their config to specify a warehouse.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• Amazon GuardDuty: Detects suspicious activity and threats using security-related data sources; it is not primarily a software vulnerability scanner.
• Amazon Detective: Helps investigate and analyze the root cause of security findings after an event.
• Amazon Cognito: Provides user authentication and authorization for applications.

• The correct answer is “Think and work holistically” (Option B).

• Focus on value: ensures outcomes matter to stakeholders, but isn’t specifically about end-to-end delivery.
• Optimize and automate: about efficiency and performance, not the holistic view.
• Collaborate and promote visibility: about teamwork and sharing information, not the end-to-end scope.

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• A) macOS with PowerShell Core 6.0 installed — not enough by itself (Az module must be installed as well). So not guaranteed.
• B) Windows 10 with the Azure PowerShell module installed — yes. PowerShell on Windows with Az loaded can run the script.
• C) Linux with the Azure PowerShell module installed — yes. PowerShell Core on Linux with Az can run the script.
• D) Linux with Azure CLI tools installed — no. The script is PowerShell-based (Az), not Azure CLI.
• E) Chrome OS with Azure Cloud Shell — yes. Cloud Shell provides an environment with Az available and can run PowerShell in the browser.

• Answer: D. Select an IdP

• Why: To reduce the number of credentials across multiple SaaS apps, implement a single sign-on approach via an Identity Provider. The first step is choosing the IdP; once selected, you can enable SAML (A) or OAuth as supported by apps. Password vaulting (C) is not a true SSO solution, and B is not the foundational step.

• prompt: the input or instruction given to the model
• completion: the desired response

json 
{"prompt":"Summarize this customer complaint.","completion":"The customer reports a delayed shipment."}

• B: A .txt file containing CSV-style lines is not automatically a valid fine-tuning dataset. The required structure and format must match the selected Bedrock model.
• C: Provisioned Throughput provides dedicated inference capacity; it does not fine-tune a model.
• D: Journals and textbooks might support domain adaptation or pretraining, but they do not provide the prompt-to-answer examples typically required for supervised fine-tuning.

• cloud applications only
• all Web traffic including cloud applications

• Cloud applications only: Only traffic to cloud apps is steered to Netskope for inspection/enforcement; other traffic bypasses.
• All Web traffic including cloud applications: All web-bound traffic, including cloud app traffic, is steered to Netskope.

• Browser isolation, Web traffic only, or a vague “traffic only” option are not the standard two steering modes.
• These two configurations let you decide what traffic Netskope analyzes in real time and what is bypassed.

• The “Answer(s)” field lists B and C (likely incorrect). The explanatory text correctly describes cloud applications only and all Web traffic including cloud applications as the two configurations.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• Correct answer: D. AWS CloudShell

• Why: AWS CloudShell is a browser-based shell that runs in the AWS Console and uses the current authenticated session. It provides a pre-authenticated, ready-to-use command-line environment directly from the Management Console, with AWS CLI and common tools installed.

• Why the other options aren’t correct:

• Answer: No.

• Why it doesn’t meet the goal:

• How to implement correctly (brief guidance):

• CDP (a Layer 2 discovery protocol) advertisements still flow on the segment, and basic neighbor information can be exchanged.
• The IP Address TLV in CDP is only present when the sending interface has an IP address. If the adjacent device’s interface is unaddressed, CDP will not advertise an IP address for that neighbor.
• As a result, CDP operates normally, but you cannot obtain that neighbor’s IP address via CDP. Other data (Device ID, Port ID, Capabilities) may still be available.

• The Act requires:

• It does not, as a public obligation, mandate publishing a detailed report on the training data used.
• Also, the Act does not specify a fixed “six months” retention for system logs in a way that would clearly make A required; logs for traceability are implied, but the six-month period is not a defined, universal requirement.

• Correct answer: D — use the same hashing algorithm as the sender's to create a numerical representation of the file.

• Integrity is verified by recomputing the hash on the received data and comparing it to the sender’s hash. This must use the same hash function; if you use a different algorithm, the digests won’t match even if the data is intact.
• The hash output is a fixed-length digest (a numerical representation). Whether you call it a “binary image” or a “numerical representation,” the key is that you generate the same type of digest with the same algorithm and compare them.

• A: same algorithm but the result is described as a binary image instead of a digest; you still compare the digest, but the phrasing is less precise.
• B/C: using a different algorithm would produce a different digest, causing false mismatch or failure to verify integrity.

• Create and manage catalogs of approved IT services
• Govern and publish infrastructure-as-code (IaC) templates, commonly AWS CloudFormation templates
• Control which users can deploy specific products and configurations
• Apply versioning, permissions, and deployment constraints

• AWS Resource Explorer: Searches and discovers AWS resources; it does not govern IaC templates.
• AWS Organizations: Manages multiple AWS accounts, policies, and consolidated billing.
• AWS Systems Manager: Helps operate and manage deployed resources, such as patching and automation, but is not primarily a catalog for governed IaC products.

• To get min/max per column, you need column profiling. That’s provided by enabling the column profile.
• To actually see those min/max values, you should show the column profile in the details pane, and you also need the details pane itself enabled so you can view it.

• Enable column profile (B)
• Show column profile in details pane (C)
• Enable details pane (E)

• Show column value distribution (D) shows distribution shape but isn’t required to get min/max.
• Show column quality details (D) deals with data quality metrics, not min/max.

• Correct answer: B — From the code repository, modify Startup.cs (in ASP.NET Core you configure the Application Insights SDK in code, not with ApplicationInsights.config).

• Why the other options aren’t correct:

• How to implement fixed-rate sampling (ASP.NET Core):

var builder = WebApplication.CreateBuilder(args); 


    builder.Services.Configure<TelemetryConfiguration>(telemetryConfiguration => 
    { 
        var builder = telemetryConfiguration.DefaultTelemetrySink.TelemetryProcessorChainBuilder; 
        double fixedSamplingPercentage = 10; // 10% sampling 
        builder.UseSampling(fixedSamplingPercentage); 
    }); 


    builder.Services.AddApplicationInsightsTelemetry(new ApplicationInsightsServiceOptions 
    { 
        EnableAdaptiveSampling = false 
    }); 


    var app = builder.Build();

• The requirement: the support plan must allow opening new support requests (technical support incidents).
• Azure’s Basic plan does not include technical support incidents—only billing/subscription support and access to community support.
• Therefore, you must choose a paid plan to open new technical support requests: Developer, Standard, Professional Direct, or Premier.

• The problem: Guest users can’t create posts in the Monthly Reports channel.
• The recommended fix (answer B): Modify the Guest access settings in the Teams admin center.

• Guest access settings control what guests are allowed to do across Teams (for example, posting, chat, and channel participation). If guests are restricted from posting, enabling the appropriate guest permissions will let them post in channels like Monthly Reports.
• The other options don’t directly change guest permissions in the way that affects posting:

• You want: a row for each year and each product (year+product), plus a summary row for each year that totals all products (year only).
• GROUP BY ROLLUP(YEAR(SO.ModifiedDate), P.Name) yields:

• GROUP BY CUBE(YEAR(SO.ModifiedDate), P.Name) produces all combinations of the grouping columns, including:

• This adds extra rows (per-year totals by product across all years and a grand total) that aren’t needed for your stated goal.

• If you want exactly the (Year, Product) and (Year) rows, you can use GROUPING SETS ((Year, Product), (Year)) which is equivalent to Rollup in this two-column case but makes intent explicit.

• SELECT YEAR(SO.ModifiedDate) AS OrderYear, P.Name AS ProductName, SUM(SO.OrderQty) AS TotalQty

• Users retain their existing usernames and passwords.
• Existing accounts can be used to access Azure-based resources.
• Administrators avoid manually recreating thousands of accounts.
• The transition is less disruptive before the on-premises data center is retired.

• A — SCIM synchronizes changes to user attributes from the identity provider to GitHub.
• B — SCIM deactivates GitHub accounts when users are removed or deactivated in the identity provider.
• D — SCIM automates user provisioning when new users are added to the identity provider.

• C: SCIM does not delete organization repositories.
• E: SCIM does not generate REST API authentication tokens.
• F: SCIM handles identity lifecycle management, not repository permission configuration based on roles.

• Key concept: ALE = SLE × ARO

• SLE = $15,000
• Occurrences: 2 in 3 years ? ARO = 2/3 per year ˜ 0.6667

• ALE = $15,000 × 0.6667 ˜ $10,000 per year

• ALE is the expected annual loss, so it averages the losses over each year.
• This helps prioritize risk treatments by comparing ALE to the cost of controls.

• To use a custom foundation model (CFM) with Amazon Bedrock, you must register the model with the SageMaker Model Registry. This provides versioning, governance, and a concrete reference that Bedrock can load and invoke.

• “Purchase Provisioned Throughput” is not a concept used for Bedrock/custom models.
• Bedrock handles the model hosting and scaling; you don’t need to buy provisioned throughput for the custom model.

• After registering the model, you’ll need to grant Bedrock access to the model (D) so Bedrock can execute it. However, the essential initial step that makes the custom model usable in Bedrock is C.

• Answer: C (192.168.0.1-192.168.0.99, 192.168.0.101-192.168.0.254)

• Why: The interface is 192.168.0.100/24, so DHCP pools must be within the 192.168.0.0/24 subnet and cannot include the router’s IP (192.168.0.100), the network address (192.168.0.0), or the broadcast (192.168.0.255). Option C provides two ranges that exclude those addresses.

• Why the other options are invalid:

• Answer: C — Spot Instances

• Why: The workload is a test environment that can be interrupted and does not need to run continuously. Spot Instances let you bid on unused EC2 capacity at a deep discount, making them the most cost-effective option for interruptible workloads.

• Why not the others:

• Quick tips:

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• Core idea: Diffie-Hellman (DH) by itself only establishes a shared secret; it does not authenticate who you’re talking to. If the exchange is unauthenticated, it’s vulnerable to a man-in-the-middle (MITM) attack.
• How MITM works in this context: An attacker intercepts the DH public values exchanged by the two legitimate parties and substitutes their own values. Each party then ends up with a shared secret with the attacker, not with the intended peer.
• Consequences: The attacker can decrypt, read, and possibly modify messages between the two parties, all without either party realizing.
• Why the other options are not correct:

• Goal: serving a static website globally with minimal latency.
• Why C works: CloudFront is a Content Delivery Network (CDN) that caches content at many edge locations around the world. When users request the site, CloudFront serves cached copies from the nearest edge location, greatly reducing latency. It also reduces load on your EC2 origin by handling many requests at the edge.
• Why the other options aren’t as good:

• In Microsoft Entra (Azure AD), admin roles can be scoped to either the entire directory (tenant) or to an Administrative Unit (AU). To assign a role at an AU scope, the user must be a member of that AU.

• Roles in question: Security Administrator and User Administrator can be scoped either to the Directory or to a specific AU.

• User1 is a member of AU1. Therefore, User1 can be assigned either at the AU scope (AU1) or at the Directory scope (global).

• User2 is not a member of AU1. Therefore, User2 cannot be assigned at the AU scope; the valid scope for User2 is only the Directory scope.

• User1: can be assigned at AU1 and at Directory scopes.
• User2: can be assigned only at the Directory scope.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• The missing piece is to configure an event source mapping between the DynamoDB stream and the Lambda function. Enabling DynamoDB Streams alone doesn’t trigger the function—you must wire the stream to Lambda so events invoke the function.
• Note that changing StreamViewType (A) only affects what data is delivered (e.g., NEW_IMAGE) and does not trigger invocations. Options C and D are not required for invocation: you don’t need SNS, and increasing the timeout won’t enable the trigger.

• In the AWS shared responsibility model, AWS manages the security of the “infrastructure,” including the physical hardware and underlying virtualization.
• The customer is responsible for everything else in the cloud stack: the guest OS on EC2, the NoSQL database software running on it, data, patching the OS, and configuring access controls like security groups.
• So, for a self-managed NoSQL database on EC2, AWS would handle the physical hardware, while you would patch the guest OS and manage DB availability, backups, and security.

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• Correct answer: C: Amazon Comprehend.

• Why: The library wants to classify books based on their text content. This is an NLP (natural language processing) task. Amazon Comprehend is AWS’s managed NLP service that can perform content classification (including creating custom classifiers) and extract meaningful information from text. The other services are not focused on text classification:

• Quick note: In practice, you’d store the books in S3, extract text if needed (e.g., from PDFs with Textract), and then use Comprehend to classify the documents into topics or genres.