Salesforce CCM-101 Exam Prep
Manage and Merchandise a B2C Commerce Cloud Store - Extended (Page 5 )

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• 25 – Traditional SMTP server-to-server mail transfer; often blocked for client submission and not inherently secure.
• 110 – POP3 for receiving email; unencrypted by default.
• 143 – IMAP for accessing email; unencrypted by default.
• 587 – Authenticated email submission and commonly secured with TLS.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Allow only approved MAC addresses
• Limit the number of learned addresses
• Shut down or restrict a port when a violation occurs

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the direct control for limiting MAC addresses on switch ports.
• NGFW: Filters routed network traffic, while this attack targets Layer 2 switch behavior.

• Unfamiliar locations or IP addresses
• Anonymous or malicious IP addresses
• Leaked credentials
• Unusual sign-in behavior

• B — The most significant risks are held by SQ.

• C — SQ should recognise the cars as inventory.

• F — SQ recognises revenue when LM sells a car to a third party.

• A: LM does not hold the most significant risks.
• D: LM does not recognise the cars as inventory.
• E: SQ should not recognise revenue when cars are merely delivered to LM.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• nmap - 10.11.1.130 — a network scanning command; mitigated with controls such as firewalls, monitoring, or access restrictions.
• “Click this link to get your free gift card.” — a phishing or social-engineering message; addressed through user awareness, email filtering, and authentication controls.
• “Your connection is not private.” — indicates a certificate or TLS validation problem; addressed by correcting the certificate or secure-connection configuration.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• Sustainability
• Performance efficiency
• Reliability

• MFA: Protects sign-in and authentication.
• Azure Key Vault: Protects deployment secrets and credentials.
• Answer: No (B).

• C. Case after-insert trigger that publishes a Platform Event

• D. Custom Apex controller that publishes a Platform Event

• A. Trigger with a callout: Salesforce triggers should not make direct synchronous callouts, and this tightly couples transaction processing to the external system.
• B. Workflow Rule with Outbound Message: This can react to record changes, but it cannot reliably capture a user clicking a menu item. It also does not provide the same flexible event-driven model as Platform Events.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• C — Before update
• D — Before insert

apex 
trigger AccountTrigger on Account (before insert, before update) { 
    for (Account acct : Trigger.new) { 
        acct.Description = 'Updated automatically'; 
    } 
}

• In after insert and after update, Trigger.new records are read-only.
• Use after triggers when you need the record’s final database Id or want to create/update related records.
• Attempting to change a field directly in an after trigger causes a read-only error.

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

1. Append Table1 and Table2 as a new query

1. Select the product column in the appended query.

1. Choose Remove Rows > Remove Duplicates

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• A: CEO-sponsored formal policy — demonstrates executive support, but sponsorship at one point in time may not sustain commitment.
• B: Security awareness training — primarily improves employee behavior, not senior management commitment.
• C: Periodic alignment reviews — ongoing reviews show that security remains relevant, supports business priorities, and uses resources appropriately.
• D: Senior management signoff on the strategy — useful for governance and accountability, but signoff is generally a one-time event.

• Amazon SageMaker — charges apply for compute, storage, and other resources used.
• AWS Config — generally charges for configuration recording and rule evaluations.
• Amazon CloudWatch — has a limited free tier, but many metrics, logs, alarms, and API usage can incur charges.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer abuse

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and connections; it lacks detailed web-request inspection.
• NGFW: Provides broader network security, but a WAF is more specialized for protecting web applications.
• UTM: Combines multiple security functions, but it is not necessarily optimized for web-application protection.

• Design Studio > Emails ? create an email-template folder
• Design Studio > Landing Pages ? create a landing-page-template folder
• Add the relevant assets to each folder
• Right-click the folder and choose Share Folder
• Select the destination workspaces

• terraform init is normally required first, especially for a new or changed working directory. It installs providers/modules and configures the backend.
• terraform plan previews the proposed changes.
• terraform apply applies those changes. It also creates a plan internally if you have not supplied a saved plan.

text 
terraform init 
terraform validate       # optional but recommended 
terraform plan 
terraform apply

• Error correction (ECC): Improves data reliability but does not maximize bandwidth.
• RAM voltage: Increasing voltage may affect stability or speed, but it is not the primary method for increasing module bandwidth.
• Physical module size: Refers to the capacity or form factor of the RAM, not its data-transfer bandwidth.

• JDBC
• SnowSQL
• Snowflake Web Interface (UI)
• ODBC
• Python connector

• Default route: 0.0.0.0/0; used only when no more specific route exists.
• Network route: A route covering the destination, such as 10.10.13.0/24.
• Host route: An exact 10.10.13.10/32 entry in the routing table.
• Floating static route: A backup static route with a higher administrative distance.

• Render thousands of animation frames
• Generate product images in multiple sizes
• Apply filters or transformations to a large image collection
• Produce visual effects for a video

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

• Recovery Services vault — stores Site Recovery configuration and recovery metadata.
• Hyper-V site — represents the on-premises Hyper-V environment.
• Azure virtual network — the target network where the replicated VM will run after failover. Since Azure VMs already use the same virtual network, that VNet can be selected as the target.
• Storage account or managed-disk target, depending on the ASR configuration and portal version.
• Provider/agent on the Hyper-V server — enables replication from Hyper-V to Azure.

• NAT traversal: Helps WAN Edge, vSmart, and vManage devices discover how to reach one another through NAT.
• Initial orchestration: Authenticates and introduces devices when they first join the SD-WAN fabric.
• Connection brokering: Provides information that allows devices to form their required control connections, after which the vBond is generally not in the data path.

• WAN Edge: Forwards user traffic and forms secure tunnels.
• vSmart: Controls the overlay control plane and distributes routes and policies.
• vManage: Provides centralized management, configuration, and monitoring.

• Menerjemahkan soal ke bahasa Indonesia.
• Menyebutkan jawaban yang benar.
• Menjelaskan alasan jawaban tersebut.
• Memberi tahu jika kunci jawaban yang tersedia tampaknya keliru.
• Menjelaskan istilah teknis penting dalam soal.

• If the hashes match, the software has likely not changed.
• If they differ, the software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily verify that software was unchanged.
• Baselines: Establish expected configurations or states, but hashing is the specific method for checking file integrity.
• Tokenization: Replaces sensitive data with non-sensitive tokens and is unrelated to software integrity.

• The listener uses a virtual IP address shared by the availability-group replicas.
• Floating IP, also called Direct Server Return (DSR), allows the SQL Server nodes to respond using the listener’s IP address rather than their individual VM IP addresses.
• This is required for the availability-group listener to function correctly with an Azure internal load balancer.

• Initial Intrusion: The compromised VPN account and stolen phishing credentials describe how the attacker first gained access, but that happened months earlier.
• Persistence: The scheduled tasks and recurring C2 connections show how the attacker maintained and automated continued access.
• Search and Exfiltration: This would involve locating and transferring data. The scenario does not primarily describe data discovery or theft.
• Cleanup: Cleanup involves removing evidence or covering tracks. Obfuscated scripts may make detection harder, but the main behavior here is maintaining access.

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

• Training or coaching
• Mentoring
• Additional support or resources
• Targeted performance improvement plans

• A: Recognition may be appropriate, but awards do not address identified gaps.
• C: Rotating schedules does not necessarily improve the specific competencies that are missing.
• D: Assessment results should be handled sensitively, but keeping them entirely private prevents useful feedback and development discussions.

• Disable high concurrency: This changes session-sharing behavior but does not provide dedicated compute or true workload separation.
• Modify the number of executors: Adjusts resources within a Spark job; it does not isolate bronze and silver processes.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• VPC: A logically isolated virtual network within a cloud provider; it describes network design, not the user-access model.
• NFV: Runs network services as software instead of on dedicated hardware.
• SaaS: Delivers software over the internet. Although the application may be delivered as SaaS, the question emphasizes its availability to multiple user groups, which points to multitenancy.

• Employees can work from any location, including remote sites and offices worldwide.
• Login can be relatively seamless after the device is registered.
• It does not require distributing additional physical authentication equipment.

• Geotagging: Identifies location, but location alone is not a strong authentication method and may prevent legitimate remote access.
• Smart cards: Provide strong authentication but require card readers and physical cards, increasing equipment and management requirements.
• Time-based logins: Typically involve one-time codes that users must enter, making the experience less seamless and potentially requiring a token or authenticator app.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best tool for scanning uploaded files.
• C. Load balancer: Improves availability and distributes traffic but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may inspect HTTP requests, but malware scanning of uploaded PDFs is the key requirement here.

• Act as the default gateway for devices in that VLAN
• Route traffic between different VLANs
• Provide management access to the switch

text 
interface vlan 10 
 ip address 192.168.10.1 255.255.255.0

• A static IP gives the surveillance system a predictable local address, so users can reliably reach it on the LAN.
• However, a static IP does not block internet-based login attempts. If the router exposes the device through port forwarding, attackers could still reach it.
• Port mapping normally exposes an internal service externally, so A is a poor choice as written.
• Subnetting alone also does not block traffic; it would require routing/firewall rules.

• B — Both inner and outer classes can be declared as with sharing.

• C — Inner classes do not inherit sharing settings from the container class.

apex 
public with sharing class OuterClass { 
    public with sharing class InnerClass { 
        // Explicitly uses sharing rules 
    } 
}

• Tracking who accessed or changed customer information
• Detecting unauthorized activity
• Supporting accountability and investigations
• Providing evidence for compliance and incident response

• Single sign-on not enabled: SSO improves convenience and centralized authentication, but it is not essential for access control.
• Complex passwords not required: This weakens authentication, but other controls may reduce the risk.
• Security baseline not consistently applied: A concern, but it is less specific and less immediately damaging than having no activity records at all.

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

Statement 1 — Correct

Statement 2 — Correct

• Dataset file: Use Import mode. Excel files are imported into Power BI, and the two Sales tables can be combined with Power Query.
• Report file: Use a live connection to the published dataset. This keeps the report separate from the dataset and avoids importing the data again.

• Report file: DirectQuery/live connection
• Dataset file: Import

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• Power BI dataset — Reuses the existing tables, relationships, and measures. You mainly create new visualizations.
• SharePoint folder — Connects to the source files, but you would need to rebuild the model and measures.
• Power BI dataflows — Primarily provide reusable data preparation; they do not automatically provide the existing report’s measures and model.
• Excel workbook — Requires reconnecting to and modeling the source data again.