Salesforce Data-Architect Exam Prep
Salesforce Certified Data Architect (Page 17 )

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• A private IP address on the virtual network
• A public IP address associated with its IP configuration

• Create a record-triggered Flow on Opportunity.
• Run it when the record is created or updated.
• Add entry criteria such as Probability > 50%.
• Use Create Records to create the related Sales Demo Request, populating its Opportunity lookup.

• Apex Trigger: Possible, but unnecessary custom code for a straightforward automation requirement.
• Workflow Rule: Cannot create a related custom record.
• Process Builder: Could create a record, but Flow is Salesforce’s preferred and more capable declarative automation tool.

• An Azure pay-as-you-go subscription follows an operational expenditure (OpEx) model.
• With OpEx, the organization pays for services as they are used, typically based on consumption.
• There is no need to purchase and maintain physical servers upfront.
• This contrasts with capital expenditure (CapEx), where the company makes a significant upfront investment in infrastructure, such as on-premises Hyper-V hosts.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• Equipment and hardware
• Facilities
• Inventory
• Backup media
• Supplies stored at an alternate or remote location

• Personal belongings of staff: Usually not organizational assets.
• DR line-item revenues: Revenue is a financial impact, not a physical asset.
• Cloud-based applications: These are primarily logical or information-processing assets, even though they depend on physical infrastructure.

• In Microsoft Teams Phone System, a single Auto Attendant can handle multiple time-based greetings by using separate schedules for office hours, after hours, weekends, and holidays.
• You can configure one Auto Attendant with four distinct greetings mapped to:

• Open the Teams admin center > Voice > Auto attendants, edit or create an Auto Attendant.
• Under Time-based routing, define four rules:

• Create a Holiday schedule with the relevant dates (e.g., Easter, Christmas) and assign the Holiday greeting.
• Save the configuration.

• If your environment cannot separate weekend from after-hours within a single Auto Attendant, you might technically need more than one Auto Attendant.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• ADF: Automatic Document Feeder; a printer/scanner hardware component.
• USB: A short-range wired connection, not a protocol for accessing a remote shared folder.
• PCL: Printer Control Language; it describes how print jobs are formatted, not how files or printers are shared over a network.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• A: Using an external OAuth 2.0 identity provider could provide unified identity, but it does not specifically address Salesforce capacity or high-volume login limits.
• B: Making the Experience Cloud community a SAML identity provider and using JIT provisioning is a possible federation pattern, but it may not be appropriate for this scale without Salesforce validation.
• C: A default account is unrelated to solving identity unification and high login throughput. Person Accounts can be supported in appropriate B2C Commerce integrations.

• Date: 2018-12-31
• Time: 08:59

• B: The original value contains the text at, so it cannot be converted directly to a date.
• A: The last characters contain the time, not the date.
• D: Extracting the first 11 characters can leave an unwanted space and does not properly separate the time component.

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• Answer: False. Agents and managers CAN create knowledge articles from Community questions.

• Why: In ServiceNow, a Community question can be converted into a Knowledge article using the Create Knowledge (or Convert to Knowledge) action. This allows what customers asked to become a reusable article for others.

• How it works (high level):

• Permissions: This ability depends on having the right roles/permissions (e.g., agents or knowledge managers). If you don’t see the option, check your role assignments or the knowledge-management configuration.

• Quick take: If a question in Community is valuable for others, a trained agent can turn it into a Knowledge article, making it available for self-service.

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

1. Ingestion Lambda receives requests from API Gateway and places messages in an SQS queue.
2. Processing Lambda is triggered by the queue and loads records into Aurora PostgreSQL.

• Decoupling: API request handling is separated from database loading.
• Buffering: SQS absorbs bursts when incoming traffic exceeds the database’s processing capacity.
• Controlled concurrency: Configure the SQS-triggered Lambda’s concurrency and batch size to avoid overwhelming Aurora or exhausting database connections.
• Automatic retries: Messages that fail processing can return to the queue and be retried. A dead-letter queue can capture persistent failures.
• Lower operational effort: The solution remains serverless and avoids managing EC2 servers or Kubernetes clusters.

• A: EC2 and Tomcat add server-management overhead.
• B: DynamoDB/DAX would require changing the database model and does not solve the Aurora ingestion design.
• C: SNS is useful for notifications and fanout, but SQS is better for durable buffering and backpressure in this producer-consumer workflow.

• Microsoft Teams: Connects to Teams-related data, but it isn’t the primary connector for the Power Apps data tables.
• Personal Analytics: Provides personal productivity insights, not application data.
• SQL Server database: Only applies if the app explicitly uses SQL Server as its data source.
• Dataflows: Used for preparing and centralizing data, not as the normal direct connection to a Power Apps app.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• ?????? CPU
• ?????????????????
• ??????????????????????????
• ???????????? throughput
• ??????????????????????????????

• A ??????? system software ????????????????????????????????? ??????????????????????????????????
• B ?????????????????????????? ????????????????????????? ?????????????????????????????
• D ????????????????????????? ?????????????? ?????????????????????????????????????????

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• B. Data loss prevention (DLP): Helps prevent sensitive data from being copied, emailed, or exfiltrated. It is not the primary control for protecting a stolen laptop’s stored data.
• C. Operating system hardening: Reduces vulnerabilities by disabling unnecessary services and applying secure settings, but it does not necessarily protect the files if the disk is accessed directly.
• D. Boot security: Helps ensure the device starts only through trusted software or approved processes. It supports platform integrity but does not itself encrypt stored files.

• Import — Loads data into Power BI. It requires a refresh, so it may not reflect changes within two minutes unless refresh is configured appropriately.
• Live connection — Connects to an existing Power BI semantic model or Analysis Services model; it is not the normal choice for connecting directly to an Azure SQL database.

• Normalize casing in the data source—for example, convert all values to uppercase or lowercase.
• Add an index key to provide a unique, stable identifier for each row or value.

• 25 — Traditional SMTP server-to-server mail transfer; not normally used for secure client submission.
• 110 — POP3, used to retrieve email and typically unencrypted.
• 143 — IMAP, used to access email and typically unencrypted.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• GPU: A failure may cause no video output, but the PC usually still powers on.
• RAM: Can prevent booting or produce error beeps, but fans and power indicators generally work.
• CPU: Can prevent startup or booting, but it usually does not cause a completely lifeless system.

• Numerical flexibility: Adjusting the number of employees, such as using temporary, part-time or contract staff.
• Temporal flexibility: Varying when employees work, such as through flexitime, overtime or different working hours.
• Shift system flexibility: Changing work patterns or shift arrangements; it is not specifically about moving between tasks.

• A — Reports: Reports are informational and don’t enforce access during an SSO transaction.
• B — Apex trigger and Permission Sets: A trigger could update permissions when a Case changes, but this creates synchronization and timing issues. It also changes Salesforce permissions rather than making a direct, real-time decision for the external system.
• C — Custom SAML JIT Provisioning: JIT provisioning is primarily for creating or updating users at login. It isn’t the appropriate mechanism for dynamically querying business records and deciding whether access should be granted.
• D — Connected App Handler: Designed for custom, programmatic control during connected-app authentication and authorization. Apex can check the user’s current open classified cases and permit or reject the SSO request.

• Sending calls to available agents quickly
• Balancing interactions across agents
• Preventing calls from being handled manually one at a time

• Workforce Management: Forecasts demand and schedules enough staff; it supports wait-time reduction but does not directly distribute calls.
• Skill-based Routing: Routes calls based on agent skills and may improve the customer experience, but the question is asking about the core feature that distributes calls efficiently.
• IVR: Lets callers navigate menus and self-service options; it does not primarily assign calls to agents.

• Context: You’re configuring a Windows Autopilot deployment profile (Profile1) for Windows 11 devices. The hotspot asks you to pick the correct behavior for two statements based on the profile’s settings.

• Box 1: “can modify the desktop settings only for themselves”

• Box 2: “Cortana settings” with options like computer name, keyboard layout, etc.

• Multi-pass wipe: Overwrites the drive’s existing data multiple times, making recovery much more difficult while preserving the drive’s functionality.
• Single-pass wipe: May be sufficient in some modern sanitization standards, but is presented here as less secure than multiple overwrites.
• Degaussing: Uses a strong magnetic field to disrupt data. It can render the drive unusable or unreliable, reducing its resale value.
• Pinning: Is not an appropriate data-sanitization method.

1. The sender hashes the original message and sends the message plus its hash.
2. The receiver applies the same hashing algorithm to the received message.
3. The receiver compares the newly calculated hash with the sender’s hash.
4. Matching values indicate that the message was not altered in transit.

• A binary image is not the normal description of a hash result.
• Using a different algorithm produces a different type of digest, so the values cannot be directly compared.
• Hashing verifies integrity, but by itself does not prove who sent the message. Digital signatures or MACs address authentication and integrity together.

• principal represents the source or initiating system.
• principal.port is the source port.
• target represents the destination system.
• target.port is the destination port.

text 
principal.port = 5555

• network.ApplicationProtocol = HTTP identifies HTTP traffic but not the backdoor specifically.
• target.port = 5555 finds traffic going to port 5555, rather than originating from it.
• network.ip_protocol = TCP is too broad because many services use TCP.

• A single Construction Job can use multiple Machinery records.
• A single Machinery record may be used on multiple Construction Jobs.
• This is a many-to-many relationship, which Salesforce models using a junction object.
• The junction object can contain fields such as:

• Master-detail to Machinery
• Master-detail to Construction Job
• Date and cost fields

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be:

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

1. Get Data ? Folder in Power BI Desktop.
2. In Power Query Editor, expand the Attributes column to expose metadata such as hidden status and other file attributes.
3. Remove the Content column (and any other data columns you do not need).

• Name
• Extension
• Date accessed
• Date modified
• Folder Path
• Attributes
• Content

• Interactive development and exploration
• Small datasets
• Lightweight transformations or testing
• Avoiding the overhead and cost of multiple workers

• Automated reports: Jobs may benefit from job clusters or SQL warehouses.
• Working with SQL in Databricks SQL: Databricks SQL warehouses are the relevant compute option.
• Automatically scaling for larger data: A multi-node cluster with autoscaling is more suitable.
• Large amounts of data: Distributed worker nodes are generally needed.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

sql 
SELECT COUNT(*) FROM table;

• A: It does not normally need to scan all data files for this operation.
• B: Results are not simply reused from a query cache every time. Caching is separate from Delta’s metadata optimization.
• D: The relevant metadata is maintained through the Delta transaction log, not directly treated as a Parquet-file metadata operation in this context.

• Customize Opportunity Contact Role

• Add the Opportunity Contact Role related list to the Opportunity page layout

• Campaign Member Role relates contacts or leads to campaigns, not opportunities.
• Campaign Member related list would expose campaign participation, not the stakeholders for the opportunity.
• Customize Campaign Role also concerns campaigns.

• A limited lifetime
• Permissions defined by an IAM role or policy
• The ability to access AWS APIs without using long-term IAM user credentials

• Amazon API Gateway — Builds and manages APIs; it does not generally issue AWS credentials for applications.
• IAM users — Usually use long-term credentials, which are less suitable for applications.
• IAM instance profiles — Provide temporary role credentials to applications running on EC2 instances, but are specifically tied to EC2. The broader requirement described is best met by AWS STS.