Test Prep ASVAB Test Exam Prep
Armed Services Vocational Aptitude Battery Test: General Science, Arithmetic Reasoning, Word Knowledge, Paragraph Comprehension, Mathematics Knowledge, Electronics Information, Automotive & Shop Information, Mechanical Comprehension, Assembling Objects (Page 46 )

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• Pull: Downloads changes from the central repository and updates the local repository.
• Push: Sends local commits to the central repository.
• Commit: Records local changes in the repository’s history.
• Merge: Combines changes from different branches.
• Clone: Creates a new local copy of a repository.

• Basic: No technical or architectural guidance.
• Standard: Technical support, but not the required design-assessment service.
• Professional Direct: Provides advisory and architecture guidance.
• Premier: Provides it too, but is unnecessarily expensive for this requirement.

• The correct option is B: AWS Storage Gateway.

• Why: The scenario requires backing up on-prem data to AWS without changing existing backup workflows. AWS Storage Gateway provides a hybrid storage solution; specifically, the Tape Gateway emulates a physical tape library, allowing your existing backup software to write to virtual tapes that are stored in AWS (in S3 or S3 Glacier). This lets you back up 10 TB to the cloud while preserving current backup workflows and on-prem infrastructure.

• How it would work: Deploy a gateway appliance or VM on-site, connect your tape-based backup software to the virtual tape library, and start writing to virtual tapes. The data is then archived in AWS, freeing up local storage.

• Why the others aren’t suitable:

• Quick tip: If you weren’t using tape, File Gateway could be another option for file-based backups; Tape Gateway is the right pick for tape-based workflows.

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

• Azure Resource Manager (ARM) templates define Azure resources in a declarative JSON file.
• You can deploy the same template repeatedly for each business unit, ensuring that identical resources are created consistently.
• Templates reduce manual administrative effort and support repeatable, automated deployments.
• Parameters can customize values such as names, regions, and sizes while keeping the overall resource configuration the same.

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• A: Daily involvement is unnecessary and may not solve the availability problem.
• C: Clarifying all requirements at the start conflicts with agile’s iterative refinement.
• D: Simply reviewing based on availability leaves the problem unresolved and allows rework to continue.

• Correct answer: A. Inbound data transfer from the internet

• Why: AWS does not charge for data transferred into AWS from the internet. Inbound data transfer is free, regardless of the amount (in this case, 2 TB). The other options involve data leaving AWS or moving between AWS regions/AZs, which incur costs:

• The inference container image or built-in algorithm
• The location of model artifacts in Amazon S3
• IAM permissions through the execution role
• Optional environment variables and networking settings

1. Create AWS::SageMaker::Model
2. Create an AWS::SageMaker::EndpointConfig that references the model
3. Create AWS::SageMaker::Endpoint that references the endpoint configuration

• AWS::SageMaker::Endpoint hosts a model but does not define the model itself.
• AWS::SageMaker::NotebookInstance provides a development environment.
• AWS::SageMaker::Pipeline orchestrates ML workflow steps.

• Disabling GPS: Affects location services, not email connectivity.
• Configuring 4G usage only: Does not enable international data access and could prevent connectivity if 4G is unavailable.
• Connecting using a hotspot: Could provide data, but it is not the most direct solution and depends on another network or device.

• In Microsoft Teams Phone System, a single Auto Attendant can handle multiple time-based greetings by using separate schedules for office hours, after hours, weekends, and holidays.
• You can configure one Auto Attendant with four distinct greetings mapped to:

• Open the Teams admin center > Voice > Auto attendants, edit or create an Auto Attendant.
• Under Time-based routing, define four rules:

• Create a Holiday schedule with the relevant dates (e.g., Easter, Christmas) and assign the Holiday greeting.
• Save the configuration.

• If your environment cannot separate weekend from after-hours within a single Auto Attendant, you might technically need more than one Auto Attendant.

• Which Security policy matches
• Which NAT rule/translation is selected
• Which PBF rule applies
• Which route is used

text 
test security-policy-match ... 
test nat-policy-match ... 
test pbf-policy-match ... 
test routing fib-lookup ...

• Answer: S3 Inventory report.

• Why: The S3 Inventory report provides a scheduled listing of objects within a bucket, including metadata about each object. When you configure it to include object tagging, you can see tags for each object, and the object keys (which reflect prefixes) and bucket scope are captured in the report. This makes it suitable for auditing and tracking “tags, buckets, and prefixes” across S3 objects.

• What the other options do (not suitable for this purpose):

• Tip: If you need tags in the report, enable the inventory option to include object tagging in the configuration.

• Correct answer: Power BI dataset

• The scenario says the data model already contains several measures and you want to create a report from the existing data with minimal development. Reusing a published Power BI dataset lets you inherit the existing measures and data model, so you don’t have to recreate them.
• How to do it: In Power BI Desktop, use the connector Power BI datasets (Get Data > Power BI datasets) and connect to the existing dataset, then build visuals using the pre-defined measures.
• Why the other options are less suitable:

• Permanent table (E): Correct. A dropped permanent table can be restored with UNDROP TABLE during its Time Travel retention period. Permanent tables also have Fail-safe protection.
• Transient table: It can also generally be restored during its shorter Time Travel period, although it has no Fail-safe. Therefore, excluding it makes the question questionable.
• Temporary table: Usually cannot be recovered after it is dropped; its lifecycle is limited to the session.
• Materialized view (D): The answer key treats it as recoverable, but recovery behavior depends on the specific Snowflake object/version capabilities. It should not be confused with an ordinary view.

• What the goal is: You want to add guest (external) users to your Azure AD tenant contoso.com, one entry per external user in a CSV.

• The proposed solution uses New-AzureADUser for each external user. Why this isn’t correct: New-AzureADUser creates a regular (internal) user in your directory. It does not create a guest/B2B user invite. So you’d end up with 500 ordinary accounts, not guest accounts with external access.

• The correct approach: Use New-AzureADMSInvitation for each external user. This invites the external user to your directory and creates a guest user (a B2B collaboration user) in your tenant. The invited user then accepts the invitation and gains access as a guest.

• Azure AD vs directory/tenant: Azure AD is the cloud identity service. A directory (also called a tenant) is your specific instance of that service (contoso.com in your scenario). The terms are often used interchangeably in exams.
• Guest user vs internal user: A guest user is external to your organization; an internal user is created directly in your directory as a normal employee/user account.
• B2B invitation: The process of inviting external users so they can collaborate in your resources; New-AzureADMSInvitation is designed for this.

• The correct setting to configure is the Enrollment Status Page (ESP) profile.
• Why: ESP tracks the enrollment progress and logs during Autopilot provisioning. You can enable log collection within the ESP policy so that, if ESP times out, the user can collect and share the logs with support.
• Optional enhancement: In the ESP policy (or the Autopilot diagnostics settings), you can enable:

• Automatic enrollment settings: control how devices auto-enroll, not log collection.
• Windows Autopilot deployment profile: controls deployment steps but not ESP log collection.
• Device configuration profile: applies settings but doesn’t provide ESP log collection mechanics.

• B — AWS DataSync: Transfers data between storage systems, such as S3, file systems, and on-premises storage. It is not a marketplace or catalog for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit is a source-code repository, not a third-party data provider. Kinesis is for streaming data ingestion.
• D — Kinesis Data Streams and ECR: ECR stores container images, not datasets. Kinesis does not provide access to ECR data as an external dataset source.

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

• Drop violating frames
• Log or alert on the violation
• Shut down or restrict the port

• Load balancer: Distributes application traffic; it does not control switch MAC learning.
• IPS: May detect some network attacks but is not the primary control for switch MAC-table exhaustion.
• NGFW: Protects traffic crossing network boundaries, while MAC flooding occurs at the switching/LAN layer.

• A. Modify CommunitiesSelfRegController

• C. Configure Communities registration to use a custom Visualforce page

• B. Modify the self-registration trigger — There is no standard “self-registration trigger” intended for this configuration. The registration logic is handled by the Visualforce controller.
• D. Configure a custom Apex controller — The standard approach is to modify the provided CommunitiesSelfRegController, rather than simply selecting a separate controller configuration.

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

• Network Security Groups (NSGs) control network traffic to and from Azure resources.
• By applying NSGs to the web tier and the database tier (subnets or NICs), you can:

• NSGs provide the necessary granularity (source/destination, port, protocol) to enforce the desired traffic patterns between tiers.
• For easier management you can use separate subnets for each tier or, optionally, use Application Security Groups to simplify rule management.

• B — Prompts and suggestions retained for 28 days
• C — User engagement data kept for two years

• The key distinction is between content data—your prompts, code context, and generated suggestions—and engagement data, such as usage activity.
• Do not confuse retention with training: enterprise Copilot data is generally not used to train GitHub’s models without appropriate authorization.
• For a current exam, verify the policy version cited by the exam provider. The key’s C is likely correct, but B should be treated cautiously and may no longer reflect the current policy.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• Creating and managing users and roles
• Granting and revoking roles and privileges
• Managing access-control responsibilities

• SYSADMIN: Manages warehouses, databases, schemas, and other objects—not primarily users and roles.
• PUBLIC: Automatically granted to every user; it is not an administrative role.
• ACCOUNTADMIN: Has the highest level of access, but should be reserved for account-level administration and emergencies rather than routine security tasks.

• Data lakes: scalable, low-cost storage for structured, semi-structured, and unstructured data.
• Data warehouses: reliable SQL analytics, governance, and performance features.

• Data lake: Primarily provides flexible, scalable storage but may lack warehouse-style reliability and governance.
• Data warehouse: Strong for structured analytics but less flexible for raw and unstructured data.
• All of these: The individual lake and warehouse do not, by themselves, unify the siloed architecture.

• Product Owner: May attend, but is not required unless also working as a Developer.
• Scrum Master: May attend to help facilitate or coach, but is not required.
• Developers: Must participate because the event is specifically for them.

• Correct answer: C) After installing ES on the search head(s) and running the distributed configuration management tool.

• ES requires the Splunk_TA_ForIndexes.spl add-on on indexers to apply index-time configurations. It should be deployed via the distributed configuration management (DCM) flow after ES is installed on the search heads, so the indexers receive the proper configuration in a controlled, versioned bundle.

• A) Deploying when adding apps to the deployment server isn’t the ES-specific order; it bypasses the ES-instantiated workflow.
• B) Installing Splunk_TA_ForIndexes.spl first isn’t the recommended order; ES needs to be installed on the search heads first.
• D) It isn’t limited to indexer cluster sites or cluster master commands; the standard flow uses DCM to push the TA to indexers in general.

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

• The problem describes the class updating field-level security on some profiles. To prevent updating fields that are not updateable for the current user, you should check each field’s updateability before making changes. Use DescribeFieldResult.isUpdateable() (e.g., via Field.describe() on each field) to guard updates.

• A and D (With Sharing): Running a class with Sharing affects record visibility, not whether a field can be updated by a user. It doesn’t prevent updates to fields the user shouldn’t modify.
• C (WITH SECURITY_ENFORCED in SOQL): This enforces FLS/FRC during queries, but it doesn’t control whether the Apex code updates fields or modifies permissions. It’s not addressing the update behavior directly.

• Hardware and infrastructure
• System software
• Networks and communications
• Technology platforms and services

• Business Architecture: Defines business strategy, organization, functions, and processes.
• Data Architecture: Defines the structure and management of enterprise data.
• Application Architecture: Describes application systems and how they interact to support business and data processing.

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• The answer: Question 51: C — Request trigger.

• To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.
• The other options aren’t appropriate:

• Create a Logic App with the Request trigger to generate a URL.
• Configure Application Insights to post the degraded-availability payload to that URL.
• Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

• The user authenticates with the external Identity Provider.
• Salesforce receives the SAML assertion.
• Salesforce uses attributes in that assertion—such as username, email, first name, last name, and profile/community information—to create the user during the first login.
• On later logins, Salesforce updates or uses the existing user record.

• On-the-fly provisioning is a general phrase; the Salesforce capability being tested is specifically JIT provisioning.
• Salesforce APIs would require a separate integration and provisioning process.
• Identity Connect is designed primarily to synchronize users from an identity directory, not to create users at the moment of their first SAML login.

• MFA verifies a user’s identity using additional authentication factors, such as a phone prompt or security token.
• It helps prevent unauthorized access even if a password is compromised.
• It does not provide secure storage or encryption of credentials used during automated deployment.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• Customers access the portal without needing a full Dynamics 365 license.
• They submit case information through portal forms.
• The submitted data is stored in Dataverse tables, such as the Case table.
• Security is controlled using web roles and table permissions, so customers can access only appropriate records.

• Dynamics 365 Connector — connects apps to Dynamics 365 data but is not the portal’s underlying data platform.
• Microsoft SharePoint — useful for documents and collaboration, not the standard case-management data source for portals.
• Microsoft Azure Storage — stores files or other data, but is not the native portal business-data platform.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio and program management
• Risk management
• Data governance
• Compliance and oversight

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• AWS Audit Manager continuously collects evidence from AWS services and helps assess whether workloads comply with regulatory frameworks and internal policies. It can produce audit-ready reports.
• AWS Config records resource configurations and evaluates them against compliance rules. For example, it can check whether encryption, logging, or access settings meet company requirements.

• Amazon Inspector identifies software vulnerabilities and unintended network exposure, not general policy or regulatory compliance.
• Amazon CloudWatch monitors metrics, logs, and operational events, but is not primarily a compliance assessment service.
• AWS CloudTrail records API activity for auditing and investigation. It supports compliance, but does not itself provide the structured compliance assessment capabilities of Audit Manager and Config.

• A — IDS attack signatures: An IDS generally detects suspicious network activity but does not necessarily scan uploaded PDF files or prevent them from being accepted.
• C — Load balancer: Distributes traffic among servers; it does not inspect files for malware.
• D — WAF command-injection blocking: A WAF can help block web attacks such as command injection, SQL injection, and cross-site scripting, but this option does not specifically address malicious PDF uploads.

• Failed login attempts
• The account being targeted
• The source user or system
• Time and frequency of attempts

• Two-factor authentication: Helps prevent unauthorized access, but does not primarily detect the employee’s attempts.
• Firewall: Controls network traffic; it generally does not monitor individual login attempts.
• Intrusion prevention system (IPS): Can detect certain network attacks, but this scenario is best addressed through authentication and audit logging.

• I can’t view the images, so I can’t tell which table is labeled as A in your screenshot. But here’s how to decide:

• How to identify the fact table:

• How to identify the surrogate key in the Patient table:

• Relationship:

kusto 
Event | where EventType == "error"

• == is the KQL equality operator.
• -eq is a PowerShell operator, not KQL.
• is is not the correct equality operator in this context.

text 
Event | where EventType –eq "error"

• Event | search "error" — valid, broad search.
• search in (Event) "error" — valid, broad search.
• Event | where EventType == "error" — valid, targeted filter.

• Date: 2018-12-31
• Time: 08:59

• B: The original value contains the text at, so it cannot be converted directly to a date.
• A: The last characters contain the time, not the date.
• D: Extracting the first 11 characters can leave an unwanted space and does not properly separate the time component.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.