Test Prep HESI A2 Exam Prep
HESI Admission Assessment Exam (A2) (Page 2 )

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• Aggregation happens once, during the scheduled job.
• Dashboard users query a relatively small, precomputed table.
• Repeated users do not trigger expensive aggregations against the detailed sales table.
• Overwriting is appropriate because the summary is rebuilt for the reporting period.

• B: Structured Streaming is unnecessary for data that only needs daily refreshes and adds operational/compute overhead.
• C: A view recomputes the aggregation at query time, increasing latency and query cost.
• D: Delta caching may improve reads but does not replace the need to materialize the expensive aggregation, and cache availability is not the main design guarantee.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Understating expenses and liabilities
• Overstating profit
• Misleading users of the financial information
• Potentially breaching integrity, objectivity, and professional competence and due care

• A: Daily involvement is unnecessary and may not solve the availability problem.
• C: Clarifying all requirements at the start conflicts with agile’s iterative refinement.
• D: Simply reviewing based on availability leaves the problem unresolved and allows rework to continue.

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• 10 TB with maximum I/O performance: Use EC2 instance store. It provides very high-throughput, low-latency local storage suitable for temporary video-processing data. The application must tolerate data loss because instance store is ephemeral.
• 300 TB of highly durable media: Use Amazon S3, which is designed for highly durable object storage and can scale to this size.
• 900 TB of inactive archival media: Use S3 Glacier, which provides lower-cost storage for data that is rarely accessed.

• A: Amazon EBS offers high performance but is not the best fit for the question’s “maximum possible I/O” requirement compared with local instance store.
• B: Amazon EFS is durable and shared, but is generally more expensive and less suitable for very large archival storage.
• C: Uses EC2 instance store for performance, but incorrectly uses EFS for the 300-TB durable tier and S3 rather than Glacier for archival data.

• SAML: Enables federated authentication and single sign-on between the IdP and SaaS providers.
• OAuth tokens: Allow delegated application access; OAuth is not primarily the first step for employee SSO.
• Password vaulting: Stores or autofills multiple passwords but does not eliminate the separate credentials or provide true federation.

Statement 1 — Correct

Statement 2 — Correct

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• Disable default accounts: Default or unused accounts may have predictable names or credentials and can be abused by attackers. They should be disabled, removed, or secured with strong credentials where necessary.
• Remove unnecessary services: Every running service can contain vulnerabilities or provide an entry point. Removing services the server does not need reduces exposure.

• Add the server to the asset inventory: Important for asset management, but it does not directly harden the system.
• Document default passwords: Default passwords should be changed or disabled—not recorded for continued use.
• Send logs to the SIEM: Supports monitoring and detection, rather than directly reducing the attack surface.
• Join the corporate domain: A deployment/configuration decision, not inherently a hardening measure.

1. You try to access a cloud application, such as accounting software.
2. The application redirects you to the company’s IdP.
3. You authenticate with the IdP.
4. The IdP sends a digitally signed SAML assertion to the application.
5. The application validates the assertion and grants access.

• The user’s identity
• Whether authentication succeeded
• Roles or group membership
• Access-related attributes

• GPU: A failure may cause no video output, but the PC usually still powers on.
• RAM: Can prevent booting or produce error beeps, but fans and power indicators generally work.
• CPU: Can prevent startup or booting, but it usually does not cause a completely lifeless system.

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

yaml 
clusterIP: None

• CronJob: Runs Jobs on a schedule and normally does not need stable networking.
• Deployment: Manages interchangeable, stateless replicas and usually uses a regular Service.
• DaemonSet: Runs a Pod on selected nodes but does not inherently require stable Pod identities.

sql 
SELECT COUNT(*) FROM table;

• A: It does not normally need to scan all data files for this operation.
• B: Results are not simply reused from a query cache every time. Caching is separate from Delta’s metadata optimization.
• D: The relevant metadata is maintained through the Delta transaction log, not directly treated as a Parquet-file metadata operation in this context.

• Customer: Dual
• Date: Dual
• Sales: DirectQuery
• SalesAggregate: Import

• Sales – DirectQuery: Near-real-time data should not rely on an imported cache. DirectQuery sends queries to the source when visuals are loaded, allowing recent sales data to appear.
• SalesAggregate – Import: A weekly refresh is sufficient, and imported data generally gives faster visual performance because it is stored in Power BI’s in-memory cache.
• Customer and Date – Dual: These are dimension tables used with both the DirectQuery Sales table and the imported SalesAggregate table. Dual allows Power BI to use cached data when possible, while still behaving appropriately in queries involving DirectQuery data. This can improve performance and reduce unnecessary limited relationships.

• Normalize casing in the data source—for example, convert all values to uppercase or lowercase.
• Add an index key to provide a unique, stable identifier for each row or value.

• Planning and designing products and services
• Developing and delivering them
• Managing risks, suppliers, and resources
• Measuring performance
• Continually improving value delivery

• Value stream steps describe activities used to create and deliver value; they do not themselves provide the broader capabilities.
• Vision and operating model provide direction and structure, but they are not the practical management capabilities that enable the work.
• Value chain is the operating model showing how activities combine to create value; it is enabled by practices and resources.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Compensating control: The server is end-of-life, so it may no longer receive security patches or support. Placing it on a restricted VLAN provides an alternative layer of protection by reducing who can access it and limiting its exposure.
• Technical control: VLAN segmentation and access control lists (ACLs) are technology-based mechanisms that enforce network access restrictions automatically.

• Managerial: Policies, procedures, and governance—not network configuration.
• Physical: Locks, guards, or barriers.
• Corrective: Restores systems after an incident.
• Detective: Identifies suspicious activity rather than restricting access.
• Deterrent: Discourages behavior but does not enforce access rules.

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• Identified risks
• Risk owners or responsible parties
• Likelihood and impact
• Risk response plans
• Current status
• Risk thresholds or trigger conditions

• Risk tolerance: The amount and type of risk an organization is willing to accept; it is not primarily a tracking document.
• Risk transfer: Moving the financial or operational impact of a risk to another party, such as through insurance or outsourcing.
• Risk analysis: The process of evaluating a risk’s likelihood and impact.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• 25 — Traditional SMTP server-to-server delivery; often restricted for client submission and not inherently encrypted.
• 110 — POP3 for retrieving email; unencrypted by default.
• 143 — IMAP for retrieving and synchronizing email; unencrypted by default.
• 587 — Authenticated SMTP submission, commonly secured with STARTTLS.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• A: Describes a broad purpose and direction, but is not the specific CIMA definition.
• C: “Scoping out” activities is too vague and incomplete.
• D: Combines long-term goals, strategies and policies, but describes a wider strategic-planning statement rather than the definition of strategy itself.

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• Have a definite, clear objective (C): Know exactly what you want to communicate. A clear purpose reduces ambiguity and irrelevant information.
• Plan the communication (E): Decide what to say, who needs the information, the appropriate channel and the best timing.
• Seek feedback (F): Check that the receiver understood the message. This could involve asking for confirmation or inviting questions.

• Ask questions (A): Usually associated with the receiver checking or clarifying information, although a sender may use questions in practice.
• Give feedback (B): Feedback is generally the receiver’s response to the sender’s message. The sender’s responsibility here is to seek feedback.
• Consider their contribution (D): This is not a standard sender-focused step in the communication process. The sender should consider the receiver’s needs and perspective, but the wording is less precise than the three recognised actions above.

• C series: CPU-optimized instances; not designed primarily for LLM training.
• G series: GPU instances generally optimized for graphics and some machine learning workloads, but not specifically large-scale model training efficiency.
• P series: Powerful GPU instances for ML training, but typically consume more energy than Trainium-based instances for suitable training workloads.

• Each Azure VM must have at least one network interface (NIC).
• A single NIC can have:

• Therefore, each of the five VMs needs only one NIC:

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

• Application management: Controls which apps can be installed or used; it does not remove existing data after theft.
• Full-disk encryption: Protects data when the device is powered off or locked, but it may not help if the attacker has already unlocked the device.
• Containerization: Separates corporate data from personal data, but the attacker may still access the corporate container using the stolen credentials.

• Resources that do not need internet access should remain on private network segments.
• Internet-facing access should be restricted to systems that require it.
• Access should be explicitly allowed rather than broadly exposed.

• A: A single administrator with access to core functions may violate least privilege if that access is broader than necessary.
• B: Inspecting traffic supports monitoring and defense, but does not itself limit privileges.
• C: Updating routing configurations supports availability and connectivity, not least privilege.

• A laptop
• Software access
• A password reset
• A mobile phone

• They run behind the scenes — applies more to automation or workflows.
• They are optional — catalog items are fundamental to a request-based catalog.
• They provide options — variables and variable options collect the requester’s choices for an item; they are not the catalog item itself.

• Reviewing security objectives to ensure they support business goals.
• Ensuring security requirements are integrated consistently across business units.
• Coordinating security policies, risk management, controls, and awareness activities.

• Executive management: Provides direction, funding, and support, but usually does not manage day-to-day security integration.
• Board of directors: Provides governance and oversight, not operational security coordination.
• Steering committee: Helps coordinate and prioritize initiatives, but the CISO typically owns the overall security program and ensures its integration.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

• Economy: Obtaining inputs at the lowest appropriate cost.
• Efficiency: Making the best use of resources, such as staff, money, and equipment.
• Effectiveness: Achieving the intended objectives or outcomes.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• Configure row-level security (RLS) using the sales region and the HR manager’s identity.
• Publish the reports and datasets through a Power BI app.
• Grant the HR managers permission to use the app, but do not add them as workspace members.
• App users can view and interact with reports while RLS limits them to their region.
• They cannot modify the report layout because they do not have workspace editing permissions.

• Adding them to the workspace gives them workspace permissions that may allow report or dataset changes, depending on the assigned role.
• Creating copies is unnecessary and creates maintenance and security problems.
• Hosting datasets and reports in different workspaces does not, by itself, provide the required controlled access.

• Access controls — ensuring only authorized users can access it.
• Encryption — protecting the data if it is intercepted or exposed.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• Sending calls to available agents quickly
• Balancing interactions across agents
• Preventing calls from being handled manually one at a time

• Workforce Management: Forecasts demand and schedules enough staff; it supports wait-time reduction but does not directly distribute calls.
• Skill-based Routing: Routes calls based on agent skills and may improve the customer experience, but the question is asking about the core feature that distributes calls efficiently.
• IVR: Lets callers navigate menus and self-service options; it does not primarily assign calls to agents.