Test Prep HESI A2 Exam Prep
HESI Admission Assessment Exam (A2) (Page 7 )

• A: Using an external OAuth 2.0 identity provider could provide unified identity, but it does not specifically address Salesforce capacity or high-volume login limits.
• B: Making the Experience Cloud community a SAML identity provider and using JIT provisioning is a possible federation pattern, but it may not be appropriate for this scale without Salesforce validation.
• C: A default account is unrelated to solving identity unification and high login throughput. Person Accounts can be supported in appropriate B2C Commerce integrations.

• Transfer — przeniesienie skutków lub kosztów ryzyka na inna organizacje, np. przez ubezpieczenie lub umowe.
• Akceptacja — firma swiadomie przyjmuje ryzyko bez dodatkowych dzialan.
• Mitigacja — zmniejszenie prawdopodobienstwa wystapienia ryzyka lub jego wplywu, np. przez wdrozenie kontroli bezpieczenstwa.
• Unikanie — calkowite wyeliminowanie ryzykownej dzialalnosci.

• Online payment fraud
• Account takeover
• Fake account creation
• Suspicious transactions

• A. A virtual network gateway
• D. A virtual network

• Azure virtual machines must be connected to an Azure virtual network (VNet). The VNet provides private IP addressing and network connectivity for the VMs.
• A virtual network gateway enables communication between the Azure VNet and the on-premises network, typically through a site-to-site VPN or ExpressRoute connection.

• Load balancer: Distributes traffic among Azure VMs; it does not connect Azure to an on-premises network.
• Application gateway: Provides web-application load balancing and Layer 7 routing; it is not the normal resource for on-premises connectivity.
• Gateway subnet: A gateway subnet is required inside the VNet when deploying a virtual network gateway, but the question’s intended two primary resources are the VNet and virtual network gateway.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

• Restarting the device: May fix software glitches, but would not usually make cable orientation matter.
• Swollen battery: A safety concern, but it would not typically cause recognition only in one cable orientation.
• Failing cable: Possible, but less likely because the problem occurs with this particular device and not other devices of the same type.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio management
• Data governance
• Risk management
• Compliance

• C series: CPU-optimized instances; not designed primarily for LLM training.
• G series: GPU instances generally optimized for graphics and some machine learning workloads, but not specifically large-scale model training efficiency.
• P series: Powerful GPU instances for ML training, but typically consume more energy than Trainium-based instances for suitable training workloads.

1. Convert text and images into numerical embeddings.
2. Store or compare those embeddings.
3. Retrieve the most semantically similar items.

• Embedding model: Best for similarity search and retrieval.
• Generation model: Best for producing new text or other content from multimodal input.

• B: Trigger.Once + scheduled job

• C: 10-minute processing-time trigger

• Disable default accounts: Default or unused accounts may have predictable names or credentials and can be abused by attackers. They should be disabled, removed, or secured with strong credentials where necessary.
• Remove unnecessary services: Every running service can contain vulnerabilities or provide an entry point. Removing services the server does not need reduces exposure.

• Add the server to the asset inventory: Important for asset management, but it does not directly harden the system.
• Document default passwords: Default passwords should be changed or disabled—not recorded for continued use.
• Send logs to the SIEM: Supports monitoring and detection, rather than directly reducing the attack surface.
• Join the corporate domain: A deployment/configuration decision, not inherently a hardening measure.

• A: Reduce management overhead — This is generally an advantage of public cloud, not hybrid cloud. Hybrid environments can increase management complexity.
• B: Cross-platform virtualization — Not the defining advantage of hybrid cloud.
• D: Leverage IaaS and PaaS — Public clouds commonly provide both IaaS and PaaS, so this is not unique to hybrid cloud.

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• A — Can help keep costs down and improve quality: The provider may have specialist expertise, efficient systems and economies of scale.
• B — There is a known fee if agreed in advance: A fixed or agreed fee can make costs more predictable and support budgeting.
• C — Allows management to focus on core operations and issues: Senior managers spend less time supervising routine finance processes and more time on strategic matters.

• Increased control: Control may decrease because the activity is performed externally.
• Increased independence: The organisation becomes dependent on the supplier.
• Increased understanding of the outsourcing business: The internal organisation usually has greater business knowledge; the provider may initially lack it.
• Increased confidentiality: Sharing financial information externally may create confidentiality risks.
• Internal expertise improved: Outsourcing can reduce opportunities to develop internal finance skills.

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• The VM keeps its configuration, disks, IP settings, and associated resources.
• The operation may cause downtime.
• You cannot guarantee that it will move specifically to Host2; Azure selects the new host.
• Update management is for update configuration, not host relocation.
• Moving to another subscription does not move the VM to a different physical host.
• Usage location is unrelated to VM placement.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• SOW
• SLA
• MOA
• MOU

• Approve major information security policies
• Allocate funding and resources
• Set the organization’s risk appetite
• Ensure security supports business objectives

• Evaluating vendors is generally handled by security, procurement, or technical teams.
• Assessing risks is typically performed by security and risk-management professionals, with management accepting or prioritizing the risks.
• Monitoring regulatory adherence is usually handled by compliance, audit, or security functions.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• Red team: Simulates attackers; exploits weaknesses to test security.
• Blue team: Defends systems; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team efforts to improve detection and defense.
• White team: Oversees or manages the test, defining rules, scope, and authorization.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

sql 
CREATE PROCEDURE dbo.usp_CreateOrder 
AS 
BEGIN 
    SET NOCOUNT ON; 
    SET XACT_ABORT ON; 


    BEGIN TRY 
        BEGIN TRANSACTION; 


        INSERT INTO dbo.Orders (/ columns /) 
        VALUES (/ values /); 


        SET @OrderID = SCOPE_IDENTITY(); 


        COMMIT TRANSACTION; 
    END TRY 
    BEGIN CATCH 
        IF @@TRANCOUNT > 0 
            ROLLBACK TRANSACTION; 


        THROW; 
    END CATCH; 
END;

• BEGIN TRY contains the transactional work.
• SCOPE_IDENTITY() retrieves the identity generated by the INSERT; it belongs after the insert, not as the error-handling logic.
• COMMIT runs only if all statements succeed.
• BEGIN CATCH handles failures.
• IF @@TRANCOUNT > 0 prevents attempting a rollback when no transaction is active.
• ROLLBACK undoes partial changes.
• THROW re-raises the original error with consistent details for the application.
• SET XACT_ABORT ON ensures many run-time errors automatically terminate and roll back the transaction.

• Gaia Portal: Controlled by Gaia administration settings, not SmartConsole Trusted Clients.
• SSH: Controlled by Gaia or operating-system SSH access settings.
• Security Gateway(s): SmartConsole connects to the Security Management Server, not directly to gateways for this purpose.

• Error correction (ECC): Improves data reliability but does not maximize bandwidth.
• RAM voltage: Increasing voltage may affect stability or speed, but it is not the primary method for increasing module bandwidth.
• Physical module size: Refers to the capacity or form factor of the RAM, not its data-transfer bandwidth.

• C — “when the query finishes”

• D — “when the query began”

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects scripts into web pages viewed by other users.
• Sideloading: Installing an application from outside the official app store. It may install unauthorized apps, but it does not generally unlock the operating system or enable restricted system features.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

kusto 
Event 
| summarize make_set(EventID) by Computer

• summarize groups records.
• by Computer creates one result row per virtual machine.
• make_set(EventID) returns an array containing unique event IDs for that computer.

kusto 
| summarize make_list(EventID) by Computer

• 16 VMs: one failure loses 25 GB and 10 cores—only 6.25% of memory.
• 8 VMs: one failure loses 12.5% of memory.
• 4 VMs: one failure loses 25%.
• 1 VM: one failure loses the entire application environment.

• Compensating control: The server is end-of-life, so it may no longer receive security patches or support. Placing it on a restricted VLAN provides an alternative layer of protection by reducing who can access it and limiting its exposure.
• Technical control: VLAN segmentation and access control lists (ACLs) are technology-based mechanisms that enforce network access restrictions automatically.

• Managerial: Policies, procedures, and governance—not network configuration.
• Physical: Locks, guards, or barriers.
• Corrective: Restores systems after an incident.
• Detective: Identifies suspicious activity rather than restricting access.
• Deterrent: Discourages behavior but does not enforce access rules.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• Import — Loads data into Power BI. It requires a refresh, so it may not reflect changes within two minutes unless refresh is configured appropriately.
• Live connection — Connects to an existing Power BI semantic model or Analysis Services model; it is not the normal choice for connecting directly to an Azure SQL database.

• Azure Resource Manager (ARM) templates
• Or, in newer Azure terminology, Bicep files

• A — Correct: Flow Builder is declarative and visual, so administrators and other non-developers can participate in designing and improving business processes without writing Apex.
• D — Correct: Flow Builder provides visual debugging tools, allowing an admin to test paths, inspect variable values, and identify where a specific business case fails.
• E — Correct: A flow’s visual structure documents the logic and makes later maintenance easier than reading and updating custom Apex code.

• B — Incorrect: Flow debugging does not attach a debugger to live customer sessions. The admin uses Flow Builder’s debug functionality with test inputs; this is not live-session debugging and should not be used to monitor real customer transactions.

• Leaf switches provide access ports for servers, endpoints, and other devices.
• Spine switches form the fabric’s backbone.
• Every leaf connects to every spine, creating a predictable, high-bandwidth, low-latency path.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: Adding a spine does not directly provide endpoint access ports.
• D: A single connection to one spine creates a bottleneck and a single point of failure.

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• Filtering or reshaping columns
• Joining with an analysis-specific dataset
• Creating calculated fields
• Applying business logic for a particular project

• Data blending: Combining different data sources, not specifically the final processing step.
• Data enhancement: A broad term for enriching data.
• Data testing: Checking data quality or pipeline correctness.
• Last-mile ETL: The precise term for additional transformations performed after the main pipeline, often directly before analytics or reporting.

• Password spraying: Tries a few common passwords against many accounts; no indication of repeated login attempts.
• Remote-access Trojan (RAT): Could install malware, but it does not explain how the attacker obtained the administrator’s credentials.
• Dictionary attack: Tries words or common passwords against an account; again, the scenario specifically highlights Telnet’s lack of encryption.

• An Azure pay-as-you-go subscription follows an operational expenditure (OpEx) model.
• With OpEx, the organization pays for services as they are used, typically based on consumption.
• There is no need to purchase and maintain physical servers upfront.
• This contrasts with capital expenditure (CapEx), where the company makes a significant upfront investment in infrastructure, such as on-premises Hyper-V hosts.

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• AWS AppSync is designed for serverless applications that need to retrieve and combine data from multiple sources.
• A pipeline resolver can invoke multiple functions or data-source resolvers, including resolvers connected to different DynamoDB tables.
• The application can receive the combined result through one GraphQL request, without requiring custom aggregation logic in the application.
• This is operationally efficient because AppSync manages the API layer and resolver execution.

• Athena Federated Query is intended primarily for analytics and ad hoc querying, not low-latency application data retrieval.
• Querying DynamoDB through Athena can consume DynamoDB read capacity and may affect table performance.
• It also introduces analytical-query overhead and is not the normal choice for a microservice web application.