WGU Cybersecurity-Architecture-and-Engineering Exam Prep
WGU Cybersecurity Architecture and Engineering (KFO1/D488) (Page 4 )

• Insert is used when you are creating a new record. It saves the record to the table and then leaves the form.
• Update is used when editing an existing record. It saves the modifications and then leaves the form.

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• /27 (255.255.255.224)

• /26 (255.255.255.192)

• /25: Creates only 2 subnets, not 3
• /28: Provides only 14 usable hosts per subnet

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• MFA: Protects sign-in and authentication.
• Azure Key Vault: Protects deployment secrets and credentials.
• Answer: No (B).

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• Root path cost
• Port priority
• Port ID

text 
interface GigabitEthernet0/1 
 spanning-tree vlan 10 port-priority 64

• Interface number: Helps form the port ID but is not normally configured as the preference value.
• VLAN priority: Not used to select a preferred forwarding interface.
• Hello time: Controls how often BPDUs are sent; it does not select a preferred port.

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• The connected switch
• The switch’s port/interface
• Device and port descriptions
• Sometimes VLAN or management information

• IKE: Establishes security associations for IPsec VPNs.
• VLAN: Defines logical network segmentation; it does not identify a physical switch port.
• netstat: Displays local network connections and statistics, not the upstream switch and port.

• Azure DevOps Analytics views are accessed through the Power BI Azure DevOps (Boards only) connector.
• This connector authenticates directly to Azure DevOps Services and lets you select an Analytics view.
• Analytics views allow filtering and shaping data in the cloud before Power BI loads it.
• Azure DevOps Server (Boards only) is for an on-premises Azure DevOps Server instance, not Azure DevOps cloud.
• A generic OData Feed connection can access OData endpoints, but it is not the purpose-built connector for Azure DevOps Analytics views.
• “OData queries” describes the underlying technology or query approach, not the most appropriate Azure DevOps connector choice here.

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• The load balancer provides the listener’s frontend IP address.
• The active SQL Server node must also respond to that same listener IP.
• Enabling Floating IP allows the listener IP to be preserved and handled correctly by the active replica.
• Without it, SQL connections may be sent to a node that cannot correctly claim the listener address.

• A health probe for the SQL Server port
• A load-balancing rule using the listener port
• Floating IP enabled on that rule

• Response and resolution times
• Availability or uptime
• Performance targets
• Support obligations
• Penalties for failing to meet commitments

• SOW (Statement of Work): Describes the work, deliverables, scope, and tasks.
• MOA (Memorandum of Agreement): Documents a formal agreement about roles or responsibilities.
• MOU (Memorandum of Understanding): Records a general mutual understanding, often without detailed service metrics.

• On-premises resources, such as an existing database
• Cloud resources, such as Azure services or virtual machines
• Connectivity that allows the application to use both environments

• Public cloud: resources are entirely provided through a public cloud provider.
• Private cloud: resources are dedicated to one organization, typically on-premises or privately hosted.

• Physical: Protects facilities or equipment, such as locks and security cameras.
• Technical: Uses technology, such as firewalls, encryption, or access controls.
• Operational: Covers day-to-day actions and processes, such as training, backups, or incident response.
• Managerial: Includes policies, standards, risk assessments, and procedures.

• Determine the project budget — Budget development is a separate cost-management activity.
• Develop a communication plan — This belongs to project communications planning, not schedule completion.
• Establish baselines — Baselines are created after the schedule and related plans have been developed and approved. They formally capture the approved plan.

• Deterministic approve/reject results
• Strict adherence to predefined rules
• Consistent, reproducible outcomes
• Auditability and regulatory compliance

sql 
ALTER TABLE dbo.DimCustomer 
ADD CONSTRAINT PK_DimCustomer 
PRIMARY KEY NONCLUSTERED (CustomerKey) 
NOT ENFORCED;

1. ALTER TABLE dbo.DimCustomer
2. ADD CONSTRAINT PK_DimCustomer PRIMARY KEY NONCLUSTERED (CustomerKey)
3. NOT ENFORCED

• Unsafe images: Requires image/content moderation before the image is processed.
• Hidden instructions embedded in images: These are indirect prompt injections contained in untrusted image content or extracted text, not necessarily in the user’s typed prompt.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• A local network gateway represents an on-premises network—its address space and VPN device information—for an Azure Site-to-Site VPN connection.
• It does not control which connection types are allowed between Azure web servers and database servers.
• It is also unnecessary when both server groups are in the same Azure virtual network.

• Row counts
• Minimum and maximum values for columns
• Distinct-value information
• Other characteristics used for optimization

• Highly polished, organization-wide presentations
• Advanced dashboard design and customization
• Broader business-user distribution and interaction
• Specialized BI governance and modeling features

• True positive: The scan reports a vulnerability that really exists.
• False positive: The scan reports a vulnerability that does not exist.
• True negative: The scan correctly reports no vulnerability.
• False negative: The scan fails to detect a vulnerability that is actually present.

• IKE (Internet Key Exchange) negotiates the IPsec security association, including:

• ESP (Encapsulating Security Payload) protects the data after negotiation by providing encryption and optionally authentication.
• AH provides authentication and integrity but does not encrypt traffic.
• TLS is used for protocols such as HTTPS, not for negotiating IPsec parameters.

• A: Not expanding would increase its dependence.
• B: More business from the same corporation would make dependence worse.
• D: Passing work to other minority businesses does not solve its own dependence.
• E: The passage does not suggest that it can force or influence the corporation to give work to others.

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• Dark web: A place where leaked credentials may be sold or shared, not usually the original source.
• Threat feeds: Collections of intelligence about threats, not a typical leakage source.
• State actors: A type of attacker, not an accidental corporate disclosure source.
• Vulnerability databases: Track known vulnerabilities, rather than leaked credentials.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Share of overall contribution: part of the organization’s total contribution is allocated to the supplying division.
• Dual pricing: the supplying division may record a higher transfer price while the receiving division records a lower price, with central accounts absorbing the difference.
• A centrally imposed price range: this may allow the transfer price to be set above variable cost, helping the supplying division recover fixed costs.

• Data Cloud combines data from multiple systems.
• It resolves and organizes that data into a unified customer view.
• That unified view enables downstream actions such as personalized campaigns, segmentation, analytics, and activation.

• A = core platform value
• D = a resulting business use case or benefit

• Allow the team to identify the causes of delays.
• Encourage improvements to processes, tools, and collaboration.
• Help remove impediments without dictating solutions.
• Protect quality and maintain a sustainable pace.

• A: An impediment log may help track issues, but merely recording them does not resolve the root causes.
• B: Directing teams toward solutions conflicts with the agile principle of a self-managing team.
• C: Adding impediments to the product backlog may delay their resolution and incorrectly treats them as product features.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

spl 
error AND host=WWW3 
status=404 OR status=500 
NOT source=access.log

• Quotation marks are used for exact phrases or values containing spaces.
• Parentheses group parts of a Boolean expression, but they are not required for every Boolean search.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

• Enforce organizational rules, such as allowed regions or required tags
• Audit resources for compliance
• Deny noncompliant deployments
• Aggregate compliance results across subscriptions

DAX 
Previous Year Sales = 
CALCULATE( 
    [Total Sales], 
    PARALLELPERIOD('DATE'[Month], -1, YEAR) 
)

• CALCULATE evaluates [Total Sales] after modifying the filter context.
• PARALLELPERIOD shifts the current date period. -1 moves it backward, and YEAR specifies a one-year shift.
• 'DATE'[Month] is the date column used for the time calculation. In a proper date table, this should be a real date column or an appropriate calendar column—not merely text such as "January".

• A: Describes an update-set conflict, not a Dictionary Override.
• B: Describes a configuration item or change concept.
• C: Describes an approval or workflow activity.

• Correct exam answer: A — HKEY_LOCAL_MACHINE
• The relevant location is associated with HKEY_LOCAL_MACHINE\SAM.
• The SAM does not store passwords in plain text; it stores password hashes.

• HKEY_CURRENT_USER contains settings for the currently logged-in user, not the account-password database.
• HKEY_USERS contains user profiles and settings loaded for users.
• HKEY_CURRENT_CONFIGURATION contains hardware/profile configuration information.

• Product recall: Premature before confirming a violation or assessing risk.
• Notify the regulatory authority: May be required later, especially if the discrepancy affects safety or compliance, but first investigate and verify the facts.
• Inform production: Not the initial regulatory assessment step; production may become involved if a packaging or manufacturing error is identified.

• Liability accounts (2000–2999) would incorrectly require dimensions, although they should have none.
• Expense accounts (6000–6998) would incorrectly require Customer, which should be optional.
• Account 6999 needs a separate rule because it requires all four dimensions, including Customer.

• 2000–2999: no dimensions
• 4000–4999: Department and Division required; Project and Customer optional
• 6000–6998: Department, Division, and Project required; Customer optional
• 6999: Department, Division, Project, and Customer required

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• Disabling a compromised account
• Blocking a malicious IP address
• Isolating an endpoint
• Creating or escalating an incident ticket

• Virus signatures: Primarily associated with antivirus or endpoint protection.
• Security agent deployment: Usually handled by endpoint-management or security-agent platforms.
• Vulnerability scanning: Typically performed by vulnerability-management tools.

• The table is large.
• Queries frequently filter or join on particular columns.
• The table’s natural data order does not support good micro-partition pruning.
• Clustering improves performance enough to justify its maintenance cost.