Cisco 350-601 Exam Actual Questions
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (Page 29 )

• Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

• Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

• Elicited and documented customer requirements
• Converted them into clear, measurable specifications
• Validated the requirements with the customer
• Used them as the basis for design, quality checks, and acceptance

• A: Requirements should reflect the customer’s needs—not the supplier’s standards.
• B: Iteration review planning does not replace proper requirements collection.
• D: A retrospective occurs after work is completed and is mainly for process improvement, not initial requirements definition.

• Correct choice: Box 1 = Yes, Box 2 = Yes, Box 3 = No (Answer: A)

• Box 1: Yes – Microsoft Purview Compliance Manager provides a risk-based compliance score that helps you understand your overall compliance posture. The score reflects how well you’re meeting regulatory requirements and internal policies.
• Box 2: Yes – It also offers step-by-step remediation guidance through actionable “improvement actions.” These guide you to implement fixes and align controls, often with links to the relevant consoles.
• Box 3: No – Compliance Manager is not part of Microsoft Defender. It is part of Microsoft Purview. Defender is a separate security product family, while Compliance Manager is in Purview for compliance risk and remediation.

• Use Purview Compliance Manager to view your compliance score and follow improvement actions.
• Improvement actions provide actionable steps and guidance for remediation.
• Defender and Purview are distinct services; do not confuse their scopes.

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

• Control plane: Managed by Databricks and contains the Databricks web application, workspace services, cluster management, and job orchestration.
• Data plane: Runs in your cloud account and contains compute resources such as:

• Worker node: Data plane compute.
• Driver node: Data plane compute.
• JDBC data source: Usually an external data system.
• Databricks Filesystem (DBFS): Provides storage access and is backed by cloud object storage rather than being entirely part of the control plane.

• Primary and core nodes: Use On-Demand Instances because the workload is business-critical. These nodes manage the cluster and store/process HDFS data.
• Task nodes: Use Spot Instances in an instance fleet. Task nodes are suitable for interruption because they do not hold essential cluster data and can be replaced or diversified across instance types.
• Terminate the entire cluster after processing: The job runs only about six hours each morning, and EMRFS stores data in Amazon S3. Keeping the cluster running for the rest of the day would waste money.

• A: Using Spot for primary and core nodes risks interruption of the critical cluster.
• C: All On-Demand is reliable but unnecessarily expensive; terminating the cluster helps, but Spot task nodes provide greater savings.
• D: Leaving primary and core nodes running after the task finishes continues to incur costs. Savings Plans also are less appropriate for this intermittent workload.

• The inference container image or built-in algorithm
• The location of model artifacts in Amazon S3
• IAM permissions through the execution role
• Optional environment variables and networking settings

1. Create AWS::SageMaker::Model
2. Create an AWS::SageMaker::EndpointConfig that references the model
3. Create AWS::SageMaker::Endpoint that references the endpoint configuration

• AWS::SageMaker::Endpoint hosts a model but does not define the model itself.
• AWS::SageMaker::NotebookInstance provides a development environment.
• AWS::SageMaker::Pipeline orchestrates ML workflow steps.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• What the scenario asks: You have a Power BI semantic model that pulls from multiple sources (Azure SQL Database and SharePoint Online), must support a single dataset for three reports, keep data current (daily refresh by 7 AM PT), and apply RLS to limit sales data by region. You need to choose a storage mode for the tables.

• Correct choice: Dual storage mode.

• Why Dual fits:

• Key concepts:

• In Microsoft Entra (Azure AD), admin roles can be scoped to either the entire directory (tenant) or to an Administrative Unit (AU). To assign a role at an AU scope, the user must be a member of that AU.

• Roles in question: Security Administrator and User Administrator can be scoped either to the Directory or to a specific AU.

• User1 is a member of AU1. Therefore, User1 can be assigned either at the AU scope (AU1) or at the Directory scope (global).

• User2 is not a member of AU1. Therefore, User2 cannot be assigned at the AU scope; the valid scope for User2 is only the Directory scope.

• User1: can be assigned at AU1 and at Directory scopes.
• User2: can be assigned only at the Directory scope.

1. Define Power Platform DLP policies
2. Add custom prompt modifications
3. Conduct adversarial testing

1. DLP policies first

1. Prompt modifications second

1. Adversarial testing last

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Correct answer: D. AWS CloudShell

• Why: AWS CloudShell is a browser-based shell that runs in the AWS Console and uses the current authenticated session. It provides a pre-authenticated, ready-to-use command-line environment directly from the Management Console, with AWS CLI and common tools installed.

• Why the other options aren’t correct:

• Customers access the portal without needing a full Dynamics 365 license.
• They submit case information through portal forms.
• The submitted data is stored in Dataverse tables, such as the Case table.
• Security is controlled using web roles and table permissions, so customers can access only appropriate records.

• Dynamics 365 Connector — connects apps to Dynamics 365 data but is not the portal’s underlying data platform.
• Microsoft SharePoint — useful for documents and collaboration, not the standard case-management data source for portals.
• Microsoft Azure Storage — stores files or other data, but is not the native portal business-data platform.

• The first step in risk management is to understand objectives, constraints, and drivers from those who care about the project. This stakeholder engagement helps identify what could go wrong and what risks are most critical.
• Only after you’ve gathered input from stakeholders should you identify risks and document them in the risk register. Updating the risk register (option C) is important, but it comes after identifying and analyzing risks.
• Options B (ensure resources) and D (revise the risk management plan) are actions that may follow once risks are identified and understood; they’re not the initial step.

• DNS????????????????

• ???????????

• ????????????????

• Answer: No (B)

• SaaS (Software as a Service) delivers applications over the internet; you don’t manage the underlying infrastructure or OS.
• Deploying Azure virtual machines requires provisioning and managing virtual machines, OS, updates, and networking—this is classic IaaS (Infrastructure as a Service).
• PaaS is for managed runtime environments (apps hosted on a platform), not for VM deployment.

• The policy is confidential, and the requester is no longer authorized merely because they used to work for the organization.
• The security professional should not disclose it by email or display it on a device without authorization.
• Using official channels allows the organization’s owner or information custodian to verify:

• ProductSearchModel.getProductSearchHits() — option C
• ProductSearchHit.getRepresentedProducts() — option B

• ProductMgr.queryAllSiteProducts() (A) queries every product in the site, which is heavy and not scalable for large catalogs.
• Category.getProducts() (D) retrieves all products in a category; this can be slow for large categories.
• Using the search model and hits (B and C) leverages the search index, supports paging, and avoids scanning the entire catalog, making it more scalable.

• A. Number ? Decimal — Correct. Salesforce Number fields are represented in Apex as Decimal.
• D. Date/Time ? Datetime — This is correct conceptually, but “Dateline” is not an Apex type. If the option literally says “Dateline,” it is incorrect.
• E. Checkbox ? Boolean — Correct. A checkbox contains true or false.

• Number ? Integer — A Number field maps to Decimal, even when its scale is zero.
• Text Area ? List<String> — A text area maps to a single String, not a list.

• The correct answer is Mass Transfer Tool.

• The Mass Transfer Records tool is Salesforce’s built-in way to reassign ownership of existing records in bulk. In this scenario, you need to transfer ownership of the departed rep’s accounts and opportunities to a new rep while keeping the team structure intact.

• Go to Setup > Data Management > Mass Transfer Records.
• Choose the object: Accounts (and then Opportunities, if needed).
• Set “Transfer From” (the leaving rep) and “Transfer To” (the new rep).
• Decide whether to transfer related records as well (e.g., opportunities tied to accounts) and proceed.
• Review and confirm.

• Data Loader / Data Import Wizard are for bulk import/export, not bulk reassigning ownership.
• Dataloader.io is a third-party tool; the built-in Mass Transfer tool is the standard Salesforce method for this task.

• VMs without NGT: Not clearly a migration blocker on its own; NGT (Nutanix Guest Tools) status isn’t the typical gating factor for live migration during maintenance.
• VMs marked as an Agent: Not a standard, widely-known migration blocker; agents aren’t the typical reason a VM can’t be migrated.
• Memory Overcommitted VMs: While memory pressure can affect placement, memory overcommitment isn’t a fundamental reason a VM would be labeled non-migratable during maintenance.
• VMs with attached Volume Groups: This is the strongest candidate. A Volume Group is a set of volumes bound to a VM; moving the VM would entail relocating and reattaching those volumes, which can complicate or block live migration during maintenance.

• The two correct options are:

• The two incorrect options:

• What wipe does: A factory reset that erases all data, apps, and settings and returns the device to the OOBE. It removes the device from management and resets identity.
• Why not for this scenario: The goal is to repurpose the same device to a new user with Autopilot. Autopilot Reset keeps the device’s Azure AD/Intune identity and re-provisions the device for the next user without a full wipe.
• What Autopilot Reset does: Removes user data and apps but preserves device identity and management connection, then reapplies the Autopilot provisioning for the next user.
• When you’d use wipe instead: If you’re selling or permanently discarding the device, or you truly want to scrub all traces and start fresh without re-enrolling.

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• Correct answer: A. Inbound data transfer from the internet

• Why: AWS does not charge for data transferred into AWS from the internet. Inbound data transfer is free, regardless of the amount (in this case, 2 TB). The other options involve data leaving AWS or moving between AWS regions/AZs, which incur costs:

• Amazon GuardDuty: Detects suspicious activity and threats using security-related data sources; it is not primarily a software vulnerability scanner.
• Amazon Detective: Helps investigate and analyze the root cause of security findings after an event.
• Amazon Cognito: Provides user authentication and authorization for applications.

• Each statement is evaluated as True (Yes) or False (No) independently.
• Key Azure facts to recall:

• A. Custom and standard objects have standard fields. True. Both object types include standard fields (for example, CreatedDate, LastModifiedDate, Owner). Custom objects also have the Name field, which is a standard field on all objects.
• B. Standard objects are included with Salesforce. True. Standard objects (like Account, Contact, etc.) come with Salesforce out of the box.
• C. A new standard object can be created. False. You can create custom objects, but you cannot create new standard objects.
• D. Only standard objects support master-detail relationships. False. Master-detail relationships can be used with both standard and custom objects.

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• Users retain their existing usernames and passwords.
• Existing accounts can be used to access Azure-based resources.
• Administrators avoid manually recreating thousands of accounts.
• The transition is less disruptive before the on-premises data center is retired.

• Correct answer: C. AWS CloudFormation

• Why: CloudFormation lets you define infrastructure as code via templates (JSON or YAML). You can create a single template that describes multiple AWS resources and reuse it to deploy consistent stacks across environments. Templates can be parameterized and stored for repeated deployments. Other options (Marketplace, AMI, OpsWorks) don’t provide reusable deployment templates in the same way.

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• The correct answer is D: All of the above.

• Snowflake Web Interface (UI): You can create and manage Virtual Warehouses from the UI (resize, suspend/resume settings, etc.).
• SQL commands: You can create and alter warehouses with DDL like CREATE WAREHOUSE and ALTER WAREHOUSE.
• Data integration tools: ETL/ELT tools can create/manage warehouses by connecting to Snowflake and issuing the appropriate commands or using their config to specify a warehouse.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• S3 Lifecycle rules automate actions such as transitioning objects to different storage classes or deleting old objects.
• S3 bucket policies control access permissions; they do not preserve earlier object versions.
• S3 server-side encryption protects data confidentiality by encrypting objects at rest, but it does not prevent deletion or overwriting.

• Accidental deletion or overwriting ? S3 Versioning
• Unauthorized access ? bucket policies and IAM
• Data encryption ? server-side encryption

• Correct answer: Day 3 (Option B)

• Why: In Engagement Studio, when the program is paused, the prospects’ wait times are also paused and do not count down. They resume from the same point when the program restarts. Here, the prospect was at day 3 of a 5-day wait when paused, so they resume on day 3 after the 1-day pause.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• Answer: D

• The strongest security comes from enforcing access at the storage layer. An IAM policy scoped to the Cognito identity prefix restricts each user to their own S3 prefix (folder), so users can only access their own files regardless of client or server code.
• This per-user isolation reduces risk of cross-user data access and is more robust than UI validation or Lambda/API validation alone.
• Implementation note: attach a policy to the Cognito identity role that allows actions on arn:aws:s3:::your-bucket/${cognito-identity.amazonaws.com:sub}/* (per-user prefix). Ensure TLS in transit and enable at-rest encryption (SSE-S3 or SSE-KMS). Use multipart upload for large files up to 300 MB.

• 6-phone boxes: 6x
• 8-phone boxes: 8x

• A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

• B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

• D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

• E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.
• F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

• D. Provide public endpoints to store and retrieve data

• E. Manage the infrastructure layer and the operating system

• Classifying data
• Configuring access permissions, such as IAM policies
• Selecting or configuring available encryption options, depending on the requirement

• The correct option is B: AWS Storage Gateway.

• Why: The scenario requires backing up on-prem data to AWS without changing existing backup workflows. AWS Storage Gateway provides a hybrid storage solution; specifically, the Tape Gateway emulates a physical tape library, allowing your existing backup software to write to virtual tapes that are stored in AWS (in S3 or S3 Glacier). This lets you back up 10 TB to the cloud while preserving current backup workflows and on-prem infrastructure.

• How it would work: Deploy a gateway appliance or VM on-site, connect your tape-based backup software to the virtual tape library, and start writing to virtual tapes. The data is then archived in AWS, freeing up local storage.

• Why the others aren’t suitable:

• Quick tip: If you weren’t using tape, File Gateway could be another option for file-based backups; Tape Gateway is the right pick for tape-based workflows.

• Developed and maintained independently
• Deployed without changing the entire application
• Scaled separately based on demand
• More resilient when another service has problems

• A: Functional testing is useful, but it is not the main practice described.
• B: Automation helps deployment, but the scenario focuses on architectural decomposition.
• C: Multiple locations improve availability, not application modularity.

• The missing piece is to configure an event source mapping between the DynamoDB stream and the Lambda function. Enabling DynamoDB Streams alone doesn’t trigger the function—you must wire the stream to Lambda so events invoke the function.
• Note that changing StreamViewType (A) only affects what data is delivered (e.g., NEW_IMAGE) and does not trigger invocations. Options C and D are not required for invocation: you don’t need SNS, and increasing the timeout won’t enable the trigger.

• On-prem you generalize and capture the VM as a VHD.
• Upload the VHD to Azure with Add-AzVhd.
• Register the VHD as an image in Azure with Add-AzImage (or New-AzImage) so it appears as a selectable image.
• Create new VMs from that image (e.g., with New-AzVM -Image ...).

• Answer: Record Producer (option D)

• Why: In ServiceNow HR Service Delivery, to make an HR Service usable from the Employee Service Center (self-service portal), there must be a way for employees to submit the request. A Record Producer provides the employee-facing form that creates the underlying HR Case when submitted. Without a linked Record Producer, the HR Service wouldn’t offer a submit form in the Employee Center.

• What the other fields are generally for (not required for exposure):

• Quick check: Look at the HR Service definition and ensure a Record Producer is associated so employees can submit requests from the Employee Center.